I keep getting C1243 code...
#1
Instructor
Thread Starter
Member Since: May 2005
Location: Baton Rouge LA
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
I keep getting C1243 code...
I know it's BPMV Pump Motor Stalled, but what does that mean. My abs and traction control lights come on and when I reset it they go off but when I drive again they immediately come back on with the code c1243 coming up. Any ideas on what to do?
#3
Instructor
Thread Starter
Member Since: May 2005
Location: Baton Rouge LA
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
Sorry to keep bumping this but could anyone offer an opinnion on what could cause this code to keep coming up along with the abs and traction control lights? Thanks.
#4
Safety Car
Member Since: Jun 2003
Location: Sunshine State
Posts: 4,640
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by stromadd
I know it's BPMV Pump Motor Stalled, but what does that mean. My abs and traction control lights come on and when I reset it they go off but when I drive again they immediately come back on with the code c1243 coming up. Any ideas on what to do?
#6
There is a ton of info on this including a post from me. There are a number of steps you can take to possibly solve this if you are somewhat handy and have a volt meter and can follow the tech info given. Do a search and I think you will find what you need.