Bizarre "exotic" Corvette noises.
03-01-2006, 06:36 PM
#1
Melting Slicks
Thread Starter
Bizarre "exotic" Corvette noises.
A few weeks ago there was an exotic Corvette noise thread. I may have what some have been looking for. I have tested 12 different sets of headers on my stock long block '03 Z06. I had the opportunity to test a set of 180 degree headers , custom built by ATI in Wixom , Michigan. Car sounded like very angry large displacement V6. Anyway, made a video clip for forum members enjoyment.
www.atimotorsports.com/public/video/blue car.avi
Car made great HP, among the best , but needed to run the car in open loop to prevent fuel trimming (which would be really confusing to the cars computer). There are some fitment issues on these cars with 180 degree headers , but it can and has been done obviously. ATI may consider building these if there is interest albeit more expensive obviously than other commonly available header combo's. These headers were custom built for the ATI in-house hot-rod.
Sound clip is with 180 degree headers, no X-pipe, and a set of Borla Stingers, enjoy.............................
Sorry server seems slow, allow to fully load before viewing, sound clip is choppy.
www.atimotorsports.com/public/video/blue car.avi
Car made great HP, among the best , but needed to run the car in open loop to prevent fuel trimming (which would be really confusing to the cars computer). There are some fitment issues on these cars with 180 degree headers , but it can and has been done obviously. ATI may consider building these if there is interest albeit more expensive obviously than other commonly available header combo's. These headers were custom built for the ATI in-house hot-rod.
Sound clip is with 180 degree headers, no X-pipe, and a set of Borla Stingers, enjoy.............................
Sorry server seems slow, allow to fully load before viewing, sound clip is choppy.
Last edited by RAFTRACER; 03-01-2006 at 06:38 PM.
Keep us posted
03-01-2006, 07:31 PM
#8
Racer
Member Since: Mar 2004
Location: Arlington VA
Posts: 382
Likes: 0
Received 0 Likes
on
0 Posts
Link to header info.
In trying to research more about "180 degree headers" I came across the following site: http://www.ssheaders.com/header.htm
I thought it was VERY interesting.
- Max
I thought it was VERY interesting.
- Max
03-01-2006, 07:41 PM
#9
Melting Slicks
Thread Starter
Originally Posted by turboc5
Inconel Very nice 
but Big $ I defandly couldn't afford that 
, but my gues if you end up produsing them they would stainless, I hope
Very nice but Big $ I defandly couldn't afford that , but my gues if you end up produsing them they would stainless, I hope
03-01-2006, 08:50 PM
#10
Racer
Member Since: Apr 2005
Location: Greenville NC
Posts: 466
Likes: 0
Received 0 Likes
on
0 Posts
If they are anything like this catback, then there's no way in hell I could ever afford a set...
http://www.bulletproofautomotive.com...il.php?ID=3833
http://www.bulletproofautomotive.com...il.php?ID=3833
03-01-2006, 10:13 PM
#11
Safety Car
Originally Posted by RAFTRACER
A few weeks ago there was an exotic Corvette noise thread. I may have what some have been looking for. I have tested 12 different sets of headers on my stock long block '03 Z06. I had the opportunity to test a set of 180 degree headers , custom built by ATI in Wixom , Michigan. Car sounded like very angry large displacement V6. Anyway, made a video clip for forum members enjoyment.
www.atimotorsports.com/public/video/blue car.avi
Car made great HP, among the best , but needed to run the car in open loop to prevent fuel trimming (which would be really confusing to the cars computer). There are some fitment issues on these cars with 180 degree headers , but it can and has been done obviously. ATI may consider building these if there is interest albeit more expensive obviously than other commonly available header combo's. These headers were custom built for the ATI in-house hot-rod.
Sound clip is with 180 degree headers, no X-pipe, and a set of Borla Stingers, enjoy.............................
Sorry server seems slow, allow to fully load before viewing, sound clip is choppy.
www.atimotorsports.com/public/video/blue car.avi
Car made great HP, among the best , but needed to run the car in open loop to prevent fuel trimming (which would be really confusing to the cars computer). There are some fitment issues on these cars with 180 degree headers , but it can and has been done obviously. ATI may consider building these if there is interest albeit more expensive obviously than other commonly available header combo's. These headers were custom built for the ATI in-house hot-rod.
Sound clip is with 180 degree headers, no X-pipe, and a set of Borla Stingers, enjoy.............................
Sorry server seems slow, allow to fully load before viewing, sound clip is choppy.
03-01-2006, 11:13 PM
#12
Safety Car
Oh chite! Is that a widebody or are the fat tires creating an illusion?
I plan on coming up this weekend (parts are in), and if my car comes back sounding like that I won't complain...j/k
I plan on coming up this weekend (parts are in), and if my car comes back sounding like that I won't complain...j/k
03-02-2006, 09:34 AM
#14
Heel & Toe
Member Since: Jul 2005
Location: Ft Campbell KY
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ecudooberhead
If they are anything like this catback, then there's no way in hell I could ever afford a set...
http://www.bulletproofautomotive.com...il.php?ID=3833
http://www.bulletproofautomotive.com...il.php?ID=3833
Jen
LNSDQ!
I must listen when I get home from work.
03-02-2006, 12:00 PM
#17
Racer
Member Since: Nov 2001
Location: Pearland TX
Posts: 440
Likes: 0
Received 0 Likes
on
0 Posts
Ah yes 180 headers. We use them on our panteras.
http://www.panteracars.com/engineDscn1009.jpg
http://www.pim.net/bgDscn0617.jpg
http://www.pim.net/bgDscn0618.jpg
http://www.pim.net/bgDscn0620.jpg (not mine)
we always called them "bundle of snakes"
They work on mid-engined cars very well as we have the space.
another pic
http://www.erareplicas.com/gt/img/exhaustop.jpg
(same engine different car, gt40)
I'm suprised somebody made them for a vette. I looked and just can't find enough space to route all the tubes and still keep them at 32".
They definetly change the sound of the exhaust.
Will
http://www.panteracars.com/engineDscn1009.jpg
http://www.pim.net/bgDscn0617.jpg
http://www.pim.net/bgDscn0618.jpg
http://www.pim.net/bgDscn0620.jpg (not mine)
we always called them "bundle of snakes"
They work on mid-engined cars very well as we have the space.
another pic
http://www.erareplicas.com/gt/img/exhaustop.jpg
(same engine different car, gt40)
I'm suprised somebody made them for a vette. I looked and just can't find enough space to route all the tubes and still keep them at 32".
They definetly change the sound of the exhaust.
Will
03-03-2006, 07:39 AM
#20
Former Vendor
Member Since: Dec 2004
Location: Wixom Michigan
Posts: 220
Likes: 0
Received 0 Likes
on
0 Posts
ATI Performance Engineering fabricated these prototype headers a year ago as an experiment. Designing the 180 degree crossover was a total pain in the rear, but we figured it out.
We currently plan to make another set to improve installation and fitment from the first set, and if there was interest, we would consider having them mass produced (in SS). Not sure of cost at this time, maybe guess at 50% higher than standard headers.
Inconel is only for those who do not need to ask about price.....
The theory of 180 degree headers is that you get the best of both long tube and short tube designs. Good midrange power under the curve like long tubes, without sacrificing top end power of short tubes. You also do not need an X-pipe, and can run smaller exhaust tubing.
If you think Danny's car sounded bizarre, you should hear them on our race car........ best description I heard from someone is that it sounded like an angry "pack" of Formula cars going by..... definitely as close as it gets to that European exotic car sound....
We currently plan to make another set to improve installation and fitment from the first set, and if there was interest, we would consider having them mass produced (in SS). Not sure of cost at this time, maybe guess at 50% higher than standard headers.
Inconel is only for those who do not need to ask about price.....
The theory of 180 degree headers is that you get the best of both long tube and short tube designs. Good midrange power under the curve like long tubes, without sacrificing top end power of short tubes. You also do not need an X-pipe, and can run smaller exhaust tubing.
If you think Danny's car sounded bizarre, you should hear them on our race car........ best description I heard from someone is that it sounded like an angry "pack" of Formula cars going by..... definitely as close as it gets to that European exotic car sound....