rear fender flares
#2
Instructor
Member Since: Sep 2006
Location: lockport IL
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
#5
Le Mans Master
Member Since: Dec 2005
Location: Port Arthur, Texas 77642
Posts: 8,475
Received 331 Likes
on
241 Posts
ACP Corvette, otherwise know as Corvette Race Bodies. They make pieces that Lou G has used on his World Challenge Corvettes that cover the entire rear wheel. These are truly race inspired for proper aerodynamics much like the C5R & C6R pieces. All Business, available in Carbon Fiber as well
http://www.corvetteracebodies.com/wo...ice%20list.htm
http://www.corvetteracebodies.com/wo...ice%20list.htm
#7
Team Owner
Member Since: Sep 2003
Location: Raleigh / Rolesville NC
Posts: 43,084
Likes: 0
Received 24 Likes
on
24 Posts
I have the 3/4" flared ACP fenders and SPWCGT rear facia with molded 1" spoiler.
I run 18x13" rims ( 3/8" spacer on longer ARP studs) with 18x335/30 Hoosiers. Tires are almost 14" side wall to side wall.
#9
#10
#12
Night Owl for life
Member Since: Nov 2003
Location: Bugs Bunny should'a made a left turn here
Posts: 23,194
Received 3,241 Likes
on
1,664 Posts
aftermarket ones do not have to be modified. the down side is they cost about $200 w/o shipping.
#13
Team Owner
Member Since: Sep 2003
Location: Raleigh / Rolesville NC
Posts: 43,084
Likes: 0
Received 24 Likes
on
24 Posts
aftermarket ones do not have to be modified. the down side is they cost about $200 w/o shipping.
That was back in 05. Noe that did not count all the prep work that was needed. Jell coat, sand, jell coat, sand, primer, sand, paint. Mount, blend paint to match.
Any after market body parts are not bolt on and go. They all need some body prep work.
#14
Night Owl for life
Member Since: Nov 2003
Location: Bugs Bunny should'a made a left turn here
Posts: 23,194
Received 3,241 Likes
on
1,664 Posts
OEM fenders are much more expesive then that.
When I did my fender flairs I think the ACP ones were less expesive then the OEM fenders. Not by much but $20 or so.
That was back in 05. Noe that did not count all the prep work that was needed. Jell coat, sand, jell coat, sand, primer, sand, paint. Mount, blend paint to match.
Any after market body parts are not bolt on and go. They all need some body prep work.
When I did my fender flairs I think the ACP ones were less expesive then the OEM fenders. Not by much but $20 or so.
That was back in 05. Noe that did not count all the prep work that was needed. Jell coat, sand, jell coat, sand, primer, sand, paint. Mount, blend paint to match.
Any after market body parts are not bolt on and go. They all need some body prep work.
#15
#16
Race Director
#17
Le Mans Master
#18
Le Mans Master
APSIS Splash Guards - about $100 each...
#19
Night Owl for life
Member Since: Nov 2003
Location: Bugs Bunny should'a made a left turn here
Posts: 23,194
Received 3,241 Likes
on
1,664 Posts