air conditioning problems
#1
Instructor
Thread Starter
Member Since: Jul 2008
Location: Phoenix AZ
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
air conditioning problems
to all the a/c gurus....
when i push the a/c button the light flashes for 1 to 3 seconds than it shuts off. compressor never engages.
what is happening? anyone?
when i push the a/c button the light flashes for 1 to 3 seconds than it shuts off. compressor never engages.
what is happening? anyone?
#2
Drifting
If you lived in the Northeast, I'd say it was on hiatus... (sorry, I had to...) Bump for ya! Best of luck w' your problem.
#4
Team Owner
Wow! I just answered this question on a thread just the other day.
Check fuse #24 to make sure its not blown. If its ok, then its probably your freon charge. Usually the blinking light is a sign that its low and it won't let the compressor run.
Check fuse #24 to make sure its not blown. If its ok, then its probably your freon charge. Usually the blinking light is a sign that its low and it won't let the compressor run.
#6
Safety Car
#7
Instructor
Thread Starter
Member Since: Jul 2008
Location: Phoenix AZ
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
air con
no codes in hvac section.
only code is 10-pcm PO 645
can anyone tell me what this code is? i did not find it in my code thread list.
thanks.
only code is 10-pcm PO 645
can anyone tell me what this code is? i did not find it in my code thread list.
thanks.
#9
Pro
I think that will happen if the fan (blower) is set to too slow. Have you tried increasing the fan's speed on the HVAC controls before pushing the AC button?