Dyno results
#1
Racer
Thread Starter
Dyno results
Well it was a long day trying to get everything together.. The results are good i think for a budget build with stock 243 heads 228/232 on 112 lg pros no cats and stingers ls6 intake and u/d pulley
417.4@ 6340 and 389.4@ 4704 on a mustang dyno
btw its on my 00 frc
I dont know how to put up the dyno sheet maybe mike at straightline will for me but for now im very happy
417.4@ 6340 and 389.4@ 4704 on a mustang dyno
btw its on my 00 frc
I dont know how to put up the dyno sheet maybe mike at straightline will for me but for now im very happy
#3
Racer
Thread Starter
what a day first pull one injector wasnt plugged in took a while to find that lol didnt get out of there til 9pm Guys at straightline are great seeing they close at 5
#5
Racer
Thread Starter
Its a comp cam 228/232 on 112 598/595
@3100 205 325tq
@3550 240hp 340tq
@4000 280hp 370tq
@5000 370 hp 388tq
@6000 410hp 360tq
I should have installed it at 110 0r 109 icl would have brought the tq in a little quicker but overall I gained 111rwhp
@3100 205 325tq
@3550 240hp 340tq
@4000 280hp 370tq
@5000 370 hp 388tq
@6000 410hp 360tq
I should have installed it at 110 0r 109 icl would have brought the tq in a little quicker but overall I gained 111rwhp
Last edited by fst85vtt; 02-07-2009 at 09:13 PM.
#6
Le Mans Master
i'm impressed...
good job!!
good job!!
#8
Le Mans Master
Member Since: Apr 2005
Location: Scarborough ONTARIO
Posts: 8,077
Likes: 0
Received 3 Likes
on
3 Posts
224RWhp at 3000 rpm is very impressive, and so what ICL u install ? i agree with u if u install at 109 or 110 ICL torque woulod be over or equal to 350 Rwt @3k rpm. Anyway still great result u got.
#14
Pro
I'm doing a similar build to yours same supporting mods but slightly less cam with milled 243's and Yella Terra rockers . I'd be thrilled with those results. One thing I never hear about with these threads is the new SOP feel of the car?? Is it what you were expecting?
#15
Racer
Thread Starter
Well its hard to tell its cold here so any throttle results in spinning tires.. It does pull very hard from a 80mph roll though I would have been happy with anything over 400rwhp, and it was on a loaded mustang dyno.. Sop feels like a whole new car
Last edited by fst85vtt; 02-09-2009 at 12:19 PM.
#16
Pro
Cool. Can't wait to get mine done.
#17
Team Owner
I'll say you should be happy!
Those numbers are great and especially being it was ran on a Mustang Dyno so you can add at least another 15 RWHP or so
Very nice! Take a picture of the Dyno sheet and download it on Photobucket and post it or scan it as a picture and then download it to Photobucket
Thanks,Matt
Those numbers are great and especially being it was ran on a Mustang Dyno so you can add at least another 15 RWHP or so
Very nice! Take a picture of the Dyno sheet and download it on Photobucket and post it or scan it as a picture and then download it to Photobucket
Thanks,Matt