Where do the brake pad clips go?
#1
Where do the brake pad clips go?
I am about to install a set of GM performace front brake calipers & pads. The pads came with a bag of hardware. I know where 4 of the clips go - each end of the abutment brackets but there are 2 other clips. I believe they are squeal clips but I can not tell where they go from the instructions provided. Can ayone provide a picture or explain in detail where this clip goes and what it does? Is it really necessary?
#2
Tech Contributor
Member Since: Aug 2008
Location: Oak Hill Virginia
Posts: 2,902
Likes: 0
Received 19 Likes
on
5 Posts
I am about to install a set of GM performace front brake calipers & pads. The pads came with a bag of hardware. I know where 4 of the clips go - each end of the abutment brackets but there are 2 other clips. I believe they are squeal clips but I can not tell where they go from the instructions provided. Can ayone provide a picture or explain in detail where this clip goes and what it does? Is it really necessary?
#3
Safety Car
#4
Safety Car
Member Since: Nov 2000
Location: Shenandoah Valley Virginia
Posts: 4,549
Likes: 0
Received 27 Likes
on
24 Posts
The third clip goes on the inside of the caliper. Look at it and you will see two small "arms" about 3/16" long pushed out from the rounded side of the clip. These locate the clip on the inside of the caliper. It will snap in place with a little pressure. This clip keeps the pads pushed all the way down and help alleviate squeel.
#5
The third clip goes on the inside of the caliper. Look at it and you will see two small "arms" about 3/16" long pushed out from the rounded side of the clip. These locate the clip on the inside of the caliper. It will snap in place with a little pressure. This clip keeps the pads pushed all the way down and help alleviate squeel.
Very nice explanation - thanks for the help!
#7
Cruising
Hello I hope I haven't missed the boat on this thread. I am replacing the front pads and calipers on my 86 there are abutment clips that came with the hardware kit I am having the same issue as the original post here. I cannot for the life of me figure where these clips go. I pulled the other side off and both sides did not have these. If someone can please help I would appreciate it.