Need a little EVAP help
10-08-2016, 06:16 PM
#1
Burning Brakes
Thread Starter
Need a little EVAP help
I've done H/C/I and the car runs great but I'm having trouble with my evap system. I keep throwing code 1441 (evap system) so i bought a new gas cap (old one had a bad o-ring) just to be safe. No luck.
It's a 97 M6 and I think the problem is the small round module closest to the firewall. I can't find any diagrams that show how the vacuum lines run off this module. I checked the larger module closest to the throttle body an it seems to hold vacuum.
Anybody have a pic or diagram of the evap system.
Yes I've been on this forum for over a decade so I've been through the SEARCH/GOOGLE function.
It's a 97 M6 and I think the problem is the small round module closest to the firewall. I can't find any diagrams that show how the vacuum lines run off this module. I checked the larger module closest to the throttle body an it seems to hold vacuum.
Anybody have a pic or diagram of the evap system.
Yes I've been on this forum for over a decade so I've been through the SEARCH/GOOGLE function.
