Drag times at Cruise-In?
#2
Melting Slicks
Member Since: Oct 1999
Location: carmel Indiana usa
Posts: 2,793
Likes: 0
Received 0 Likes
on
0 Posts
Re: Drag times at Cruise-In? (Arnie's C5)
I was there yesterday. I didn't see any National Vendors there like LPE. I didn't have one decent run. My best 60 foot was a 2.2 and my best mph through the traps was a 107.8. I don't think that track is very impressive. I know my driving wasn't :(
Snowman was making a lot of power but wasn't hooking up . I think he had the fastest car but I know he didn't get into the elevens and I also know of an 01 Z06 with Skinnys and slicks with a best e.t. of 11.9 that only ran a 12.6 so I don't feel to bad. I went there to work on my 60 foots times mostly
My clutch is starting to go...:(
David In Indy :seeya
----------------
2000 NBM M6-Coupe
All Options minus F45
Euros/Lloyd Mats/Chrome Shifter/Ripper/Halltech tric/T-bypass/Taylor
Wires/TTS Headers/High Flow Cats/X-pipe/Indy Corsas/Baers/Z06
Calipers/Russell ss brake lines/Hawk Pads/Yokohama Avs Sports/Porsche DOT4 Hi-Performance Brake fluid/Redline oils/Zaino/Engine Dress by Auto Buffs and Design Specialties
[Modified by ledfoot, 10:41 AM 5/25/2002]
Snowman was making a lot of power but wasn't hooking up . I think he had the fastest car but I know he didn't get into the elevens and I also know of an 01 Z06 with Skinnys and slicks with a best e.t. of 11.9 that only ran a 12.6 so I don't feel to bad. I went there to work on my 60 foots times mostly
My clutch is starting to go...:(
David In Indy :seeya
----------------
2000 NBM M6-Coupe
All Options minus F45
Euros/Lloyd Mats/Chrome Shifter/Ripper/Halltech tric/T-bypass/Taylor
Wires/TTS Headers/High Flow Cats/X-pipe/Indy Corsas/Baers/Z06
Calipers/Russell ss brake lines/Hawk Pads/Yokohama Avs Sports/Porsche DOT4 Hi-Performance Brake fluid/Redline oils/Zaino/Engine Dress by Auto Buffs and Design Specialties
[Modified by ledfoot, 10:41 AM 5/25/2002]
#3
Le Mans Master
Thread Starter
Member Since: Apr 2000
Location: Illinois
Posts: 5,532
Likes: 0
Received 0 Likes
on
0 Posts
Cruise-In II Veteran
Re: Drag times at Cruise-In? (ledfoot)
Thanks for the info Dave! Sounds like the track wasn't prepared, I was hoping to hear of some low nines and maybe some 8 second runs from ARE or LPE. There were some 9 second runs at the Birthday Bash a few weeks ago, if I remember correctly.
#6
Safety Car
Re: Drag times at Cruise-In? (ledfoot)
I was there yesterday. I didn't see any National Vendors there like LPE. I didn't have one decent run. My best 60 foot was a 2.2 and my best mph through the traps was a 107.8. I don't think that track is very impressive. I know my driving wasn't :(
#7
Burning Brakes
Member Since: Jun 2001
Location: Windsor, Ontario
Posts: 1,059
Likes: 0
Received 0 Likes
on
0 Posts
CI 3, 4, 5, 6 & 10 Veteran
Re: Drag times at Cruise-In? (JoeyG)
My times were slower than usual by 2 tenths but my reaction times were a lot better ranging from .520 to .582
12.96 @ 107.6 MPH 2.02 60'
12.92 @ 108.4 MPH 2.03 60'
12.91 @ 107.6 MPH 2.00 60'
Mike :cheers:
12.96 @ 107.6 MPH 2.02 60'
12.92 @ 108.4 MPH 2.03 60'
12.91 @ 107.6 MPH 2.00 60'
Mike :cheers:
#8
Drifting
Member Since: Oct 1999
Location: Gaithersburg MD
Posts: 1,272
Likes: 0
Received 0 Likes
on
0 Posts
Cruise-In II Veteran
Cruise-In III Veteran
Re: Drag times at Cruise-In? (Arnie's C5)
Track was pretty good in the morning, but it only lasted about an hour.
There was a fairly strong head wind all day.
My best was a 12.297 at 114.51 with a 1.891 60 ft., but most were in the 12.50 to 12.60 range.
Everyone was off by 3/10's to 6/10's.
Still it was a great day!
There was a fairly strong head wind all day.
My best was a 12.297 at 114.51 with a 1.891 60 ft., but most were in the 12.50 to 12.60 range.
Everyone was off by 3/10's to 6/10's.
Still it was a great day!
#9
Le Mans Master
Member Since: Apr 1999
Location: Burlington ON
Posts: 7,819
Likes: 0
Received 0 Likes
on
0 Posts
Cruise-In I, II, III, IV & V Veteran
CI-I & II Auto-X Champ
Re: Drag times at Cruise-In? (Steve Row)
My best on my street tires was a 12.40 @ 119.8mph with a 2.20 60'. My best with the new motor was up here a few weeks ago, a 11.64 @ 122.0mph with a 1.907 60'.
I never do any good at Beech Bend. I don't think my Canadian car likes the humidity or high temps! :D
I never do any good at Beech Bend. I don't think my Canadian car likes the humidity or high temps! :D
#10
Drifting
Member Since: Aug 2000
Location: Chapin SC
Posts: 1,698
Likes: 0
Received 1 Like
on
1 Post
Cruise-In II Veteran
Cruise-In III Veteran
Re: Drag times at Cruise-In? (Arnie's C5)
I ran two 12.1s in the high 117 range when the track first opened. Last run of the day was a 12.6. Snowman was not running well at all. I ran him once, he had me by 2 lengths at the 1/8 and I pulled him by .03 at the end.
#11
Team Owner
Member Since: Dec 2000
Location: D*ck ina Box
Posts: 58,783
Likes: 0
Received 0 Likes
on
0 Posts
CI III & IV Vote Ho
CI II, III, IV & V Vet
CI IV Bracket Champ
St. Jude Donor '03-'04
Re: Drag times at Cruise-In? (Arnie's C5)
track was slippery, the 60' times sucked, my best was a 2.2 and my run was a 13.0 @108....but it was all good :D
#12
Le Mans Master
Member Since: Sep 2000
Location: Toms River NJ
Posts: 6,518
Likes: 0
Received 0 Likes
on
0 Posts
Cruise-In II Veteran
Cruise-In III Veteran
Re: Drag times at Cruise-In? (JerryL)
Yeah, I agree with Jerry - Snowman "Big Guy" ... was all show, no go ... Oh well ... maybe next year. I ran my typical high 12's ... mostly all 9's, high 9's .. due to the crappy conditions, suck track and stock car I got :D
#13
Melting Slicks
Member Since: Aug 1999
Location: Milwaukee WI
Posts: 2,540
Likes: 0
Received 2 Likes
on
2 Posts
LS1Edit Guru
Cruise-In I Veteran
Cruise-In II Veteran
Cruise-In III Veteran
Re: Drag times at Cruise-In? (BLISSYFIT)
My best run was 11.05 , all motor, with a 1.619 60' , thanks to some good advice from ChrisNJC5...
5000 rpm launch, 12psi in drag slicks, front skinnies, hal shocks set to zero in front, max in rear, 110 octane fuel, extra timing via ls1edit, 6800 rpm shifts..
Not sure if there were any faster.. track was "okay", but certainly not great. Biggest issue was me -- still learning about how to launch the M6 and drag slicks..
5000 rpm launch, 12psi in drag slicks, front skinnies, hal shocks set to zero in front, max in rear, 110 octane fuel, extra timing via ls1edit, 6800 rpm shifts..
Not sure if there were any faster.. track was "okay", but certainly not great. Biggest issue was me -- still learning about how to launch the M6 and drag slicks..
#14
Le Mans Master
Member Since: Aug 2000
Location: Scottsdale, AZ
Posts: 6,447
Likes: 0
Received 0 Likes
on
0 Posts
Cruise-In III Veteran
Re: Drag times at Cruise-In? (Arnie's C5)
The drag racing was fun, no helmets, passengers allowed, tops down :cheers: I was off by about 3/10's, best of the day was 13.05 @ 110.51mph. My mph was consistant all day, mid-110mph, but the 60' times sucked, 2.17-2.3. I did get in 12 runs, and that was with taking some extended breaks. All in all it was a fun day :)
#15
Le Mans Master
Member Since: Apr 2000
Location: DrunkDefender
Posts: 5,589
Likes: 0
Received 0 Likes
on
0 Posts
CI 1-2-3-4-5-6-7-8 Veteran
CI-IV AutoX Champ
CI-IV Burnout Champ
St. Jude Donor '07-'10
Re: Drag times at Cruise-In? (pkmoose)
[Just visiting] I've only run the full 1/4 at Beech Bend. All we have around here are 1/8th mile tracks. I got a new best ET, in sig. I was able to pull a couple 2.08 60 foot times though. Most people couldnt get traction.
#17
Pro
Member Since: Mar 2002
Location: Tampa FL
Posts: 532
Likes: 0
Received 0 Likes
on
0 Posts
Cruise-In III Veteran
Re: Drag times at Cruise-In? (Arnie's C5)
I've never run the 1/4 before. This was my first time:
13.020 at 117.2
My times seem to suck. Don't know how gm says zo6 stock will do 12.6 and my C5 will only do 13 on the bottle. hmm am I that bad of a driver?
13.020 at 117.2
My times seem to suck. Don't know how gm says zo6 stock will do 12.6 and my C5 will only do 13 on the bottle. hmm am I that bad of a driver?
#18
Team Owner
Member Since: Mar 2001
Location: Virginia Beach
Posts: 25,889
Likes: 0
Received 5 Likes
on
5 Posts
CI 3-5-6-7-8 Veteran
Re: Drag times at Cruise-In? (Arnie's C5)
I was there with a bone-stock mag-red 99 vert 6-speed. I ran a best of 13.48 @ 106.86 mph... trying to launch on emt's was hard, as a result my best 60-foot was 2.26. I was very impressed with the car seeing as it's my mom's nice-weather driver and had never been to the track. With an intake, some real tires, and a decent track (60-foot) this thing can run 12's =).
#19
Drifting
Member Since: Aug 2000
Location: Chapin SC
Posts: 1,698
Likes: 0
Received 1 Like
on
1 Post
Cruise-In II Veteran
Cruise-In III Veteran
Re: Drag times at Cruise-In? (JMon)
JMon,
Not bad for your first time. There were several Z06s that did not break into the 12s. Your MPH was good, that's the best indication of horsepower. What were your 60 foot times?
Not bad for your first time. There were several Z06s that did not break into the 12s. Your MPH was good, that's the best indication of horsepower. What were your 60 foot times?