Jireh

I can't seem to find out where the wire on the drivers seat belt connects. Help?

dadaroo

There are 2 wires that go to the switch in the buckle receiver. What wire are you talking about and which end of the wiring harness are you talking about?

In 2001 power to the receiver switch is a Black/White wire and ground in Black. The switch is normally closed and open when buckled.

I could not verify what wires colors are for your year since you provided us with no information.

Jireh

the harness contains two wires and is connected to the receiver side of the seat belt. the wire harness is probably 8" long with female plug on end. I can't determine wire color but black connector and I don't know where that end connects to. Thank you for the responce. This is a 2000 vert.

dadaroo

The two wires I spoke of go to a 6 pin Black connector under the driver seat.

Let me know if this helps. I can provide any and all info you need.

The 6 wire colors are:

Black/White
Brown/White
Black
3 Orange wires

The colors are the same for the Male and Female connector at that location.

Jireh

Thanks I'll check it out. Blessings