CWhite56

I've been working on my C5, replacing valve springs,lifters, cam and its done fine. I cranked it up and let it idle for about 5 minutes and then my car just shut off and it won't crank back up. Engine turns over I have fuel but no spark. Any suggestions.

andrew0611

We replaced the crank sensor and the car will still not start. All of the fuses are good. When cranking the tach is showing no rpm and still no spark.

CWhite56

I want to give a Shout Out to 8VETTE7 for his help with the problem with my C5 Vette. We found a bad ground and fixed that and it's up and running again. Now to the Dyno for fine tuning.😀

73Corvette

Glad you got it fixed... What codes? What procedure did you take to fix it?