Varram intake questions
#1
Varram intake questions
Ok, my car came with a new(looks like its never been put on anything) varram intake in a box. Well its missing the peices that go to the fog lights. Why?! i have no clue... has anyone ran across this and modded their factory bezel to work? or are they to short from the get go?? i really dont want to buy the new lower part, if i can mod my fog light bezel and make it work.
Last edited by JustinC5; 12-01-2015 at 03:43 PM.
#2
Drifting
Ok, my car came with a new(looks like its never been put on anything) varram intake in a box. Well its missing the peices that go to the fog lights. Why?! i have no clue... has anyone ran across this and modded their factory bezel to work? or are they to short from the get go?? i really dont want to buy the new lower part, if i can mod my fog light bezel and make it work.
Good luck.
#3
#4
Race Director
Member Since: Apr 2007
Location: South Western Ontario
Posts: 11,061
Received 845 Likes
on
721 Posts
Yes, you can make those from the pieces on your car. I'd bet money those 2 pieces are factory pieces they just modify for use with their ducts. Basically, cut the back off so they are open and then install the ducts up to them. Yo don't need to fasten them together but a couple of rivets or bolts would work.
The following users liked this post:
JustinC5 (12-02-2015)
#6
Here is mine.
They appear to be factory pieces modded.
Hope the pics help you out.
They are only held in by 3 rivets on the top side. The rest is not attached at all.
Let me know if you need more pics
They appear to be factory pieces modded.
Hope the pics help you out.
They are only held in by 3 rivets on the top side. The rest is not attached at all.
Let me know if you need more pics
Last edited by bill mcdonald; 12-02-2015 at 01:54 AM.
#7
#8
Yes those pictures work awesome. I cut mine up already and i guess i cut to much, because it hits the front frame haha
Ive seen the 3 rivets and on my intake it has only 2 holes in it?? that why to me is seems like it just didnt come with the bezel?!
Ive seen the 3 rivets and on my intake it has only 2 holes in it?? that why to me is seems like it just didnt come with the bezel?!
#10
Well got the first set cut out, have two sets thanks to frsr06!
I've got them bolted in but now that I look at the pics I think I need to cut some more out lol
I'll post up some pics tomorrow
I've got them bolted in but now that I look at the pics I think I need to cut some more out lol
I'll post up some pics tomorrow
The following users liked this post:
JustinC5 (12-15-2015)
#16
Melting Slicks
Yeah, my Vararam really doesn't fit as good as I would like. You might want to mock it up before drilling anything and riveting. Something with the angle the duct makes as it transitions to the inlets.
Last edited by MrRenoman; 12-15-2015 at 10:44 PM.
#17
Before you mount that up, take another look at mine.
Your's might work...
It looks to me like you are 1.5" out, when you want to be in.
Notice how the tunnel part is inside the fog light bezel.
This cut out tab is kind of like a stop for vararam at the back of the fog light bezel.
Your's looks like it is 1-1.5" out from where it needs to be
This is how they are cut
Around 2 3/4" from the front here, this is the top
It looks like 2 1/8" from the front here. this is the bottom
Your's might work...
It looks to me like you are 1.5" out, when you want to be in.
Notice how the tunnel part is inside the fog light bezel.
This cut out tab is kind of like a stop for vararam at the back of the fog light bezel.
Your's looks like it is 1-1.5" out from where it needs to be
This is how they are cut
Around 2 3/4" from the front here, this is the top
It looks like 2 1/8" from the front here. this is the bottom
Last edited by bill mcdonald; 12-16-2015 at 12:26 AM.
#19
Le Mans Master
Nice job gents... your gonna love it... start saving for a street tune from CoW next...
#20
Race Director
Member Since: Dec 2010
Location: Atlanta, GA
Posts: 10,426
Received 1,260 Likes
on
1,055 Posts
2020 Corvette of the Year Finalist (performance mods)
C5 of Year Winner (performance mods) 2019
since you have it off the car and are modding it to fit you might spend a little more time to seal the perimeter of the bezels to the intake tubes... air will take the path of least resistance and having open holes all around the bezels will allow the air to escape rather than going into the intake tubes where it should be going