stinkydragon

I recently bought a 2002 Z06, and one of the previous owners replaced the manual passenger seat with a C6 power seat. Currently, the seat is inoperable and I would really like to be able to move it if for no other reason than to be able to remove it (it's currently in the far back position, and I can't access the rear bolts).

Here is the connector:



And here is the end that is coming from the car:



One of the disconnected wires from the car side is 12v, but the others are just floating or ground.

Does anyone have any clue how I could get this seat working again for at least enough time to get it out of the car, or maybe a way to move the seat without the motor?

Rob 02

It looks like you would apply +12v to tan for forward and light green for reverse with black being ground.