C5 Tech Corvette Tech/Performance: LS1 Corvette Technical Info, Internal Engine, External Engine, Tech Topics, Basic Tech, Maintenance, How to Remove & Replace
Sponsored by:
Sponsored by:

Eek! My air dam!

Thread Tools
 
Search this Thread
 
Old 08-17-2003, 02:48 PM
  #1  
Ubenripped
Melting Slicks
Thread Starter
 
Ubenripped's Avatar
 
Member Since: Jul 2003
Location: Gonzales LA
Posts: 2,529
Likes: 0
Received 0 Likes on 0 Posts
Default Eek! My air dam!

I bought a 99 vette about 4 months ago. I was talking to my neighbor the other day and he said my air dam looked a little bent. I looked under the car and sure enough. But it's the metal bar the plastic piece attaches to that is bent. :banghead: Also one of the center screws on the passenger side has been ripped out and it hangs a little bit. They're kind of worn and don't cost that much so I'm going to just replace all 3 of them.

Can someone who has replaced them before tell me if the metal bar on the center piece is part of the air dam or is that a seperate part i need to buy?
Old 08-17-2003, 02:49 PM
  #2  
SHOWTIME!
Safety Car
 
SHOWTIME!'s Avatar
 
Member Since: Apr 2003
Location: over ten thousand posts 7/10ths back
Posts: 4,199
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Eek! My air dam! (Ubenripped)

COMES ONE PIECE (oops caps...)
Old 08-17-2003, 02:55 PM
  #3  
Ubenripped
Melting Slicks
Thread Starter
 
Ubenripped's Avatar
 
Member Since: Jul 2003
Location: Gonzales LA
Posts: 2,529
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Eek! My air dam! (SHOWTIME!)

Thanks. It's not as bad as I thought then. I'm going to order them tomorrow. I'm glad they were smart enought to at least make this part out of cheap material. :)

Get notified of new replies

To Eek! My air dam!




Quick Reply: Eek! My air dam!



All times are GMT -4. The time now is 12:41 AM.