***Mantic clutches in stock and on special!***
#22
Premium Supporting Vendor
Thread Starter
Member Since: Oct 2004
Location: Providing the most proven supercharger kits for your C5/6/7 609-752-0321
Posts: 23,313
Received 1,084 Likes
on
656 Posts
Some Mantic road race results;
April 21st, 2012 - Millville, NJ: We here at East Coast Supercharging LLC. was proud to support our NASA Road Racers in their respective classes today at New Jersey Motorsports Park. The weather turned out to be fantastic, with one of the largest turnouts that we have seen in years.
Paul Plemenos, 2006 C6 Z06, debuted in the season opener in the NASA ST-1 class. This class is a very high paced class, with fast cars and rigorous competition. This class is based upon a Horsepower to Weight ratio of 5.5:1, and has additional weight penalties for tires, etc. Paul's brand new ECS built 427ci performed flawlessly, coupled with his new Mantic 9000+ Twin Series Clutch Kit, Pfadt Aggressor 2 Package, and ARH 1 7/8" Longtube Headers. The Thorne Valley Vineyards, sponsored team, did quite well this weekend placing 2nd in the ST-1 class earning Paul some new Hoosier shoes. Amongst gathering crucial data for suspension tuning and engine tuning, it was an overall great day for the TVV crew.
Benjamin Lesnak, 2001 C5 Corvette, debuted in the season opener in the NASA TTA class. Last year Ben was the TTB National Champion, so this year he stepped up to the TTA class to bring havoc to another set of drivers! The C5 Corvette needs to maintain a 8.7:1 overall Horsepower to Weight ratio, and is also restricted by tire/engine modifications. Ben was the fastest throughout practice, #1 qualifier, and then took home the victory in the TTA class earning himself some new shoes also. Ben is a hardcore racer, as you will see him toating his 8 tire trailer behind his Corvette, driving all over the country with his reliable, ECS built, 2001 Corvette featuring the new Mantic 7000+ Triple 7.25" disc setup.
April 21st, 2012 - Millville, NJ: We here at East Coast Supercharging LLC. was proud to support our NASA Road Racers in their respective classes today at New Jersey Motorsports Park. The weather turned out to be fantastic, with one of the largest turnouts that we have seen in years.
Paul Plemenos, 2006 C6 Z06, debuted in the season opener in the NASA ST-1 class. This class is a very high paced class, with fast cars and rigorous competition. This class is based upon a Horsepower to Weight ratio of 5.5:1, and has additional weight penalties for tires, etc. Paul's brand new ECS built 427ci performed flawlessly, coupled with his new Mantic 9000+ Twin Series Clutch Kit, Pfadt Aggressor 2 Package, and ARH 1 7/8" Longtube Headers. The Thorne Valley Vineyards, sponsored team, did quite well this weekend placing 2nd in the ST-1 class earning Paul some new Hoosier shoes. Amongst gathering crucial data for suspension tuning and engine tuning, it was an overall great day for the TVV crew.
Benjamin Lesnak, 2001 C5 Corvette, debuted in the season opener in the NASA TTA class. Last year Ben was the TTB National Champion, so this year he stepped up to the TTA class to bring havoc to another set of drivers! The C5 Corvette needs to maintain a 8.7:1 overall Horsepower to Weight ratio, and is also restricted by tire/engine modifications. Ben was the fastest throughout practice, #1 qualifier, and then took home the victory in the TTA class earning himself some new shoes also. Ben is a hardcore racer, as you will see him toating his 8 tire trailer behind his Corvette, driving all over the country with his reliable, ECS built, 2001 Corvette featuring the new Mantic 7000+ Triple 7.25" disc setup.
#24
Premium Supporting Vendor
Thread Starter
Member Since: Oct 2004
Location: Providing the most proven supercharger kits for your C5/6/7 609-752-0321
Posts: 23,313
Received 1,084 Likes
on
656 Posts
Two more pallets of clutches arrived today, thanks for the orders guys! We are very pleased to have so many happy Mantic customers out there!!
#30
Premium Supporting Vendor
Thread Starter
Member Since: Oct 2004
Location: Providing the most proven supercharger kits for your C5/6/7 609-752-0321
Posts: 23,313
Received 1,084 Likes
on
656 Posts
Stop by our booth at Corvettes of Carlisle to see these clutches in person and pick up some promotional items too!
#31
Hi I have close to 500 rear wheel horsepower heads and cam,american racing hea
ders,micky T drag radials on 2001 zo6.My question is do you think the single ert2 is more than enough or if money is not an issue should i go for the twindisc set up!!I beat it pretty good ,mostly on the street track mabey twice a year..thanks Bob
ders,micky T drag radials on 2001 zo6.My question is do you think the single ert2 is more than enough or if money is not an issue should i go for the twindisc set up!!I beat it pretty good ,mostly on the street track mabey twice a year..thanks Bob
#32
Premium Supporting Vendor
Thread Starter
Member Since: Oct 2004
Location: Providing the most proven supercharger kits for your C5/6/7 609-752-0321
Posts: 23,313
Received 1,084 Likes
on
656 Posts
Hi I have close to 500 rear wheel horsepower heads and cam,american racing hea
ders,micky T drag radials on 2001 zo6.My question is do you think the single ert2 is more than enough or if money is not an issue should i go for the twindisc set up!!I beat it pretty good ,mostly on the street track mabey twice a year..thanks Bob
ders,micky T drag radials on 2001 zo6.My question is do you think the single ert2 is more than enough or if money is not an issue should i go for the twindisc set up!!I beat it pretty good ,mostly on the street track mabey twice a year..thanks Bob
#33
Premium Supporting Vendor
Thread Starter
Member Since: Oct 2004
Location: Providing the most proven supercharger kits for your C5/6/7 609-752-0321
Posts: 23,313
Received 1,084 Likes
on
656 Posts
Thanks to everyone who stopped by our booth for tunes, to schedule work, or just to say hi and grab some of the promo give aways. We greatly appreciate it !!
Some photo's of the weekend.
http://s1176.photobucket.com/albums/...view=slideshow
Some photo's of the weekend.
http://s1176.photobucket.com/albums/...view=slideshow
#34
Hey Doug, I picked up the ECS diff brace from Chris on Friday in Carlisle. He said shipping would be $25 on the ER2 and we agreed on the show price. Should I just order it from website and mention that in the comments section?
#37
mantic er2 clutch cover torque specs
Hi Doug,I just recieved a mantic er2 clutch kit from you guys and was not sure what to torque the clutch cover to...I think it is saying in the kit instructions 33nm.as the directions dont really relate to this clutch.they only show the double clutch.just want to do it right the first time!!thanks!!!!
#39
Premium Supporting Vendor
Thread Starter
Member Since: Oct 2004
Location: Providing the most proven supercharger kits for your C5/6/7 609-752-0321
Posts: 23,313
Received 1,084 Likes
on
656 Posts
Hi Doug,I just recieved a mantic er2 clutch kit from you guys and was not sure what to torque the clutch cover to...I think it is saying in the kit instructions 33nm.as the directions dont really relate to this clutch.they only show the double clutch.just want to do it right the first time!!thanks!!!!
Would you like an adjustable master or stock?