Don't wait till you scrape! Check this out!
#42
Supporting Vendor
Thread Starter
Did you know: The name "Corvette" was borrowed from a line of small, fast navy ships used in World War II.
#43
Supporting Vendor
Thread Starter
The first generation Corvette was introduced late in the 1953 model year. Originally designed as a show car for the 1953 Motorama display at the New York Auto Show, it generated enough interest to induce GM to make a production version to sell to the public. First production was on June 30, 1953.
#44
Supporting Vendor
Thread Starter
The second generation (C2) Corvette, which introduced Sting Ray to the model, continued with fiberglass body panels, and overall, was smaller than the first generation. The C2 was later referred to as mid-years.[19] The car was designed by Larry Shinoda with major inspiration from a previous concept design called the "Q Corvette," which was created by Peter Brock and Chuck Pohlmann under the styling direction of Bill Mitchell.
#45
Supporting Vendor
Thread Starter
Whether your a Pro or a Do Your Own Repair kind of guy, here is a simple but very effective tool to help you make
easy work of installing your LS1-2-3-6-7-9 Timing and Rear Main cover and seals.
The AlignIt tool gets the timing & rear main covers centered perfectly with the crank and installs the seal in seconds! Check out the videos.
Having the seal centered accurately with the crank minimizes the chance of seal leakage.
Timing Cover AlignIt Only $26.95
Rear Main AlignIt Only $37.95
Hub simulator only $23.95
Buy more than one of the AlignIt Tools and save!
http://www.saccitycorvette.com/Timin...nmenttool.html
easy work of installing your LS1-2-3-6-7-9 Timing and Rear Main cover and seals.
The AlignIt tool gets the timing & rear main covers centered perfectly with the crank and installs the seal in seconds! Check out the videos.
Having the seal centered accurately with the crank minimizes the chance of seal leakage.
Timing Cover AlignIt Only $26.95
Rear Main AlignIt Only $37.95
Hub simulator only $23.95
Buy more than one of the AlignIt Tools and save!
http://www.saccitycorvette.com/Timin...nmenttool.html
#46
Supporting Vendor
Thread Starter
Fangs from SacCityCorvette provide the best possible protection available for your front skid Plates/Lower Radiator support on your C5/C6 Corvette.
#49
Supporting Vendor
Thread Starter
#50
Instructor
I guess I have to buy a second set?
I bought a set a while back. I noticed today that I only have one now. The missing side is thoroughly covered in glue, but no fang. Do you guys sell just one fang? Is there any warranty on these?
#51
Supporting Vendor
Thread Starter
Pm me your PayPal email so we can see about getting you another one.
Thank you,
Christian
#53
Supporting Vendor
Thread Starter
Fangs from SacCityCorvette provide the best possible protection available for your front skid Plates/Lower Radiator support on your C5/C6/C7 Corvette.
#55
Supporting Vendor
Thread Starter
#56
I bought these to install on a new radiator support bracket on my 2004 C5. I had originally mounted rollers (two different set) which I went through at about 55,000 miles. The original bracket was bent, cracked and just plane worn out. The reason is that my drive way is sloped up and the house sits above street level. I can not get in and out of my driveway without scraping, I even drive past my house and come back at a hard angle to raise the front as I'm climbing the driveway.
THESE THINGS WORK!!! I've had them on the car now with 5,000 miles they still look brand new, they scrap less than the wheels and I don't see the bending I did on the original support.
The guys at SacCity are the best look at all of there products, I especially like the CoolIt. Another product that is simple to install and works great.
#57
Supporting Vendor
Thread Starter
Thanks Big George for the kind words, we really appreciate it!
Christian
Christian
__________________
Don't forget to check out our products at www.saccitycorvette.com
If you like our products, tell others! If not, tell us!
Don't forget to check out our products at www.saccitycorvette.com
If you like our products, tell others! If not, tell us!
#58
Supporting Vendor
Thread Starter
Fangs from SacCityCorvette provide the best possible protection available for your front skid Plates/Lower Radiator support on your C5/C6/C7 Corvette.