[Z06] **NEW PRODUCT** C5 Vararam PowerDuct** Intro Price! Check it out!
#21
Burning Brakes
Member Since: Jun 2008
Location: Lexington KY
Posts: 768
Likes: 0
Received 0 Likes
on
0 Posts
#22
Melting Slicks
It doesn't seem to rub.The old,stock duct was thicker and did barely touch the liner.
I put some foil on top of the new duct and closed the hood.I saw no imprint,but as you know,it's a real tight fit for anything.
To avoid a possible rub,I pulled it down as far as I could,toward the VR intake inlet.There is maybe a 1/16in gap between the duct & the rad shroud.
I really like it.
\db2
Carolina
I put some foil on top of the new duct and closed the hood.I saw no imprint,but as you know,it's a real tight fit for anything.
To avoid a possible rub,I pulled it down as far as I could,toward the VR intake inlet.There is maybe a 1/16in gap between the duct & the rad shroud.
I really like it.
\db2
Carolina
#24
Not happy with mine. The maf would not fit. Had to file it down a bit. Should not have to do that with a brand new part. Finally got the maf in and it is so tight I don't think it will ever come out without breaking either the power duct or the maf itself. I like the idea of the part but not the quality I have seen.
#25
Melting Slicks
Yep,all the parts fit really tight,that's why I used a little vaseline to help with the slide.
Certainly no air leaks! I really like mine.
\db2
Carolina
Certainly no air leaks! I really like mine.
\db2
Carolina
#28
I tried to get it to slip in with lubricants, but had to file down. I like the part, but I don't like the idea of having to file it down to fit.
#29
Platinum Supporting Vendor
Thread Starter
These are in stock and shipping! Sale price is good through January 31, 2009!!
#30
Platinum Supporting Vendor
Thread Starter
We've got more ready to ship!
__________________
RPI DESIGNS, LLC. - C5/C6/C7 Corvette Parts
4000+ C5/C6/C7 Parts & accessories - Forum members get 10% off with SS2007 coupon at checkout
Like us on www.facebook.com/rpidesigns and you might win $100.
Our brand new C7 Corvette Z06 Style Side Skirts come painted in Carbon Flash Metallic, see them here!
email: rpi.designs.customerservice@gmail.com Web: www.rpidesigns.com
RPI DESIGNS, LLC. - C5/C6/C7 Corvette Parts
4000+ C5/C6/C7 Parts & accessories - Forum members get 10% off with SS2007 coupon at checkout
Like us on www.facebook.com/rpidesigns and you might win $100.
Our brand new C7 Corvette Z06 Style Side Skirts come painted in Carbon Flash Metallic, see them here!
email: rpi.designs.customerservice@gmail.com Web: www.rpidesigns.com
#32
Drifting
Member Since: Jun 2004
Location: Mechanicsville VA
Posts: 1,565
Likes: 0
Received 5 Likes
on
5 Posts
St. Jude Donor '08
For those having problems getting the MAF seated, try heating the air bridge with a hair dryer. Learned this today when I installed this system on my son's 1999 FRC (directions were included). Worked like a charm. Will have to go back and redo the install on my car as I couldn't get the MAF fully seated.
Gene
Gene
#33
Platinum Supporting Vendor
Thread Starter
For those having problems getting the MAF seated, try heating the air bridge with a hair dryer. Learned this today when I installed this system on my son's 1999 FRC (directions were included). Worked like a charm. Will have to go back and redo the install on my car as I couldn't get the MAF fully seated.
Gene
Gene
#35
Safety Car
I installed mine but was disappointed in the fit. I had to heat up the opening of the duct with a propane torch to get my Z06 MAF in it. Also, both openings of the duct were oval shaped. I really think VaraRam could have spend a little bit extra time with the fine tuning. Once I got the MAF and couplers installed, it fit well in the car.
#37
Safety Car