[Z06] Installed some Corbeau LG1s Today
#1
Pro
Thread Starter
Installed some Corbeau LG1s Today
Install is definitely not for the faint of heart. Some trimming required
Enjoy!
I didn't pay for heated seats but got them. Quality was quite impressive.
Enjoy!
I didn't pay for heated seats but got them. Quality was quite impressive.
#3
Pro
Thread Starter
You have to put the passenger seat in the driver's side, and vice versa which i think is stated in a couple threads. Other than that just some trimming of the trim pieces (see pic below). I had no intentions of keeping the stock seatbelts so if you want those you would need to talk to the guys at TPS.
#4
Supporting Vendor
Member Since: Nov 2007
Location: San Jose CA
Posts: 30,294
Received 270 Likes
on
204 Posts
St. Jude Donor '11
Correct me if I'm wrong but the stock seat belts have to be removed and you have to cut the trim piece. Also, how much leg room do you have since it's a wider seat?
__________________
TPSMotorsports.com
Mike Mak
2705 Lafayette Street
Santa Clara, CA 95050
Phone #: 408/898-4632
Email #: MikeM@TPSMotorsports.com
Authorized dealer of Corbeau Seats, ECS Superchargers, Edelbrock SuperChargers, A&A Superchargers, Kooks, Whipple, Magnalow, Corsa, Borla. LG Motorsports, Procharger, Billy Boat Exhaust, AWE Exhaust, American Racing, TPS Brake Rotors/ Kits, Stainless Steel Brake Lines & much more...Mike Mak
2705 Lafayette Street
Santa Clara, CA 95050
Phone #: 408/898-4632
Email #: MikeM@TPSMotorsports.com
#5
Pro
Thread Starter
Leg room us same as stock from what I can tell. Seat goes all the way to the audio stuff I have mounted behind the seats. I am 5' 11"with 42"waist and fit perfect. My buddy who is 6'1"and skinny and also fits with no issue.
I would assume the stock belts have to go I want sure if you guys had a method.
I would assume the stock belts have to go I want sure if you guys had a method.
#6
Supporting Vendor
Member Since: Nov 2007
Location: San Jose CA
Posts: 30,294
Received 270 Likes
on
204 Posts
St. Jude Donor '11
Leg room us same as stock from what I can tell. Seat goes all the way to the audio stuff I have mounted behind the seats. I am 5' 11"with 42"waist and fit perfect. My buddy who is 6'1"and skinny and also fits with no issue.
I would assume the stock belts have to go I want sure if you guys had a method.
I would assume the stock belts have to go I want sure if you guys had a method.
#9
Race Director
I've heard with some of these wider seats that you can install a C6 seat belt system in the C5 to make them work.
Anyone have experience with this?
Rick
Anyone have experience with this?
Rick
#10
Burning Brakes
Last edited by SoDiezl350; 07-09-2011 at 12:29 AM.