Notices
C5 General General C5 Corvette and C5 Z06 Discussion not covered in Tech
Sponsored by:
Sponsored by:

[Z06] how much "shake" does a LS6 have ?

Old 04-07-2012, 02:10 AM
  #1  
hoacha
Heel & Toe
Thread Starter
 
hoacha's Avatar
 
Member Since: Apr 2012
Location: ontario
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
Default how much "shake" does a LS6 have ?

Hey folks!.. Well my z06 is my first Chev in many years and cant be happier!.. I picked up my 2003 without knowing about what the car has been through or how it was driven by the previous owner. To my surprise i got a Corsa cat back system on it . Now heres my question.. While decellerating its got some nice crackle out the exhaust, and the cars got a nice little rock to it at idle.. Well i know the 03's have a beafer cam, so i dont know if this is normal, or abnormal!!.. It does have cats on it and passed an emmisions test, so i assume its running normally, not missing or anything.. the power is lacking by no means..Lights up the tires easily in 3rd whish is a bit crazy at times.. I cant tell if the motors been apart. Its pretty clean. Any input would be awesome!!..thanks.
Old 04-07-2012, 02:30 AM
  #2  
striper
Le Mans Master
 
striper's Avatar
 
Member Since: May 2005
Location: Fort Lauderdale, Florida
Posts: 6,366
Received 246 Likes on 215 Posts

Default

When idling there's just enough shake to remind you that you've got a hot rod at your feet. It smoothes out as soon as you increase the rpm's. I own an '03 Z also. I bought mine new and it still drives as good as new at 100k miles. Good luck to you and welcome to the forum.
Old 04-07-2012, 03:01 AM
  #3  
Supercharged111
Safety Car
 
Supercharged111's Avatar
 
Member Since: Jan 2012
Location: Colorado Springs CO
Posts: 3,797
Received 472 Likes on 349 Posts

Default

Mine doesn't really shake that much. Sometimes it does a little, I thought it was plugs or something, but I think that's just the way it is. Certainly doesn't have a lope, so not that kind of shake. I think the ****** factory motor mounts are partly to blame, how do you like the rattle when you turn the car off?
Old 04-07-2012, 01:04 PM
  #4  
BlueTeamZ06
Racer
 
BlueTeamZ06's Avatar
 
Member Since: Mar 2011
Posts: 330
Likes: 0
Received 3 Likes on 3 Posts

Default

It has a bit of Rock-n-Roll even stock, how many miles does yours have?

The Corsa will put a little more noise and rumble out for sure.

Change all the fluids, pull the codes, if you want do a compression check. If you find any metal shavings in the fluids/on dipstick get serious. Otherwise drove it like you stole it
Old 04-07-2012, 02:59 PM
  #5  
Zmeister
Drifting
 
Zmeister's Avatar
 
Member Since: Apr 2010
Location: Jacksonville Florida
Posts: 1,479
Received 32 Likes on 30 Posts

Default

Welcome to the Forum and congratulations on your purchase!
My '04 Z idles pretty smooth. Just a slight bit of vibration. Pretty mild mannered for such a potent package.
These cars seem to be nearly indestructable. You should be looking forward to many years of driving fun.
Don't hide it away in a garage. Take it out and show it how much you love it!
Old 04-07-2012, 04:16 PM
  #6  
ctusser
Melting Slicks
 
ctusser's Avatar
 
Member Since: Dec 2006
Location: Woodinville WA
Posts: 2,186
Received 2 Likes on 2 Posts

Default

I remember my car had a little shake at idle when it was stock cammed, my dad even commented on it.
Old 04-07-2012, 05:04 PM
  #7  
Paul 75 L82
Le Mans Master
 
Paul 75 L82's Avatar
 
Member Since: Dec 2000
Location: Blue Ridge Georgia
Posts: 5,245
Received 24 Likes on 22 Posts

Default

Shake, Hell Yes! And now that I have the Texas Speed 228R and the Borla exhaust at a stop light it shakes and sounds so good. These are great cars.
Old 04-07-2012, 05:08 PM
  #8  
AU N EGL
Team Owner
 
AU N EGL's Avatar
 
Member Since: Sep 2003
Location: Raleigh / Rolesville NC
Posts: 43,084
Likes: 0
Received 23 Likes on 23 Posts

Default

shake? hmmm 112+4 cam, solid motor mounts and an aluminum seat bolted to the floor, Lts, and straight pipes.

Could mix a martini
Old 04-07-2012, 07:50 PM
  #9  
skyavonee
Melting Slicks
 
skyavonee's Avatar
 
Member Since: Jul 2010
Location: Los Angeles
Posts: 3,334
Received 112 Likes on 78 Posts

Default

Originally Posted by hoacha
the power is lacking by no means..Lights up the tires easily in 3rd whish is a bit crazy at times..
Get new tires. When I bought mine, it had 7-year-old stock tires and easily spun in 3rd gear. After putting on soft summer tires, I could floor it throughout 2nd gear without loosing traction, as long as the tires/road were warm and I didn't stab the go pedal too quickly.
Old 04-07-2012, 07:53 PM
  #10  
machz800ps
Burning Brakes
 
machz800ps's Avatar
 
Member Since: Jun 2009
Location: New Baltimore Michigan
Posts: 787
Likes: 0
Received 1 Like on 1 Post

Default

Congrats!!
FYI 02-04 z06s all have the same cam
My 04 also has a little shake at idle (very little)
Steve
Old 04-07-2012, 09:55 PM
  #11  
Omaha02Z06
Melting Slicks
 
Omaha02Z06's Avatar
 
Member Since: Jul 2008
Posts: 2,000
Likes: 0
Received 2 Likes on 2 Posts
Default

Originally Posted by skyavonee
Get new tires.
Old 04-08-2012, 10:37 AM
  #12  
tremor1
Burning Brakes
 
tremor1's Avatar
 
Member Since: May 2008
Location: Georgetown Texas
Posts: 1,106
Received 5 Likes on 5 Posts

Default

how do you like the rattle when you turn the car off?

Push the clutch pedal in when you turn the engine off and it won't rattle.
Old 04-08-2012, 08:51 PM
  #13  
Moto One
Drifting
 
Moto One's Avatar
 
Member Since: Sep 2006
Location: Truckee CA
Posts: 1,335
Received 164 Likes on 101 Posts

Default

Is it possible that the flYwheel has been changed out for a lighter single mass one? That will let it Rattle in the trans and shake at Idle.

Mark
Old 04-09-2012, 12:11 PM
  #14  
Lt. Dan M.
Burning Brakes
 
Lt. Dan M.'s Avatar
 
Member Since: Feb 2012
Location: Palm City Fl
Posts: 901
Likes: 0
Received 2 Likes on 2 Posts
Default

My 02 with 26K miles on it shakes a little at idle. I would tend to think it is the cam, these cams by old school standards is quite an aggressive cam. Also, had the OEM tires on it and I could break them loose 1st thru 4th. Put Nitto invo on the back and it sticks like glue now.
Old 04-17-2012, 11:22 PM
  #15  
hoacha
Heel & Toe
Thread Starter
 
hoacha's Avatar
 
Member Since: Apr 2012
Location: ontario
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
Default

Gentlemen..THANKS FOR THE REPLIES!!..i was away for a bit and neglected to check the forum.

I guess the cam profile would be responsible.. The motor mounts appear fine . Havnt checked compression , but dont think thats the issue..The corsa exhaust does give alot of a backfire upon decelleration though (cam lobe overlap?).. Sounds pretty aggressive .. I almost suspected the previous owner cammed it when i compared it to the half dozen other cammed cars i've owned..

Is the slight backfire and crackle a characteristic of Corsa exhaust upon deceleration?..Not that im complaining..I love it!!!

oh, the rattle at shut off is awesome..lol..

milage is 100k

Last edited by hoacha; 04-17-2012 at 11:30 PM.
Old 04-18-2012, 12:56 AM
  #16  
TheDVS1
Drifting
 
TheDVS1's Avatar
 
Member Since: May 2004
Location: San Clemente CA
Posts: 1,822
Likes: 0
Received 1 Like on 1 Post

Default

Originally Posted by hoacha
Is the slight backfire and crackle a characteristic of Corsa exhaust upon deceleration?..Not that im complaining..I love it!!!

oh, the rattle at shut off is awesome..lol..

milage is 100k
That's not backfire - that's exhaust REVERSION baby! To me that's just one of the great things about a Z and a good exhaust. Enjoy!
Old 04-18-2012, 01:11 AM
  #17  
Blue Blood
Melting Slicks
 
Blue Blood's Avatar
 
Member Since: Aug 2006
Location: North Dallas Forty Orange County, Ca.
Posts: 3,111
Received 113 Likes on 59 Posts
St. Jude Donor '08-'09-'10-'11-'12-'13, '15,'21

Default

The "backfire" you are describing is an indication that the car needs a tune. After installing LT headers my car was running lean, tuning solved the problem and helped the car to run better.

Get notified of new replies

To how much "shake" does a LS6 have ?

Old 04-18-2012, 01:34 AM
  #18  
hoacha
Heel & Toe
Thread Starter
 
hoacha's Avatar
 
Member Since: Apr 2012
Location: ontario
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
Default

Interesting.. I should have it tuned.. I am imagining i need to find an experienced tuner in my area.. What is the ballpark price range for a tune if you dont mind me asking?
Old 04-18-2012, 02:35 AM
  #19  
skyavonee
Melting Slicks
 
skyavonee's Avatar
 
Member Since: Jul 2010
Location: Los Angeles
Posts: 3,334
Received 112 Likes on 78 Posts

Default

Originally Posted by hoacha
Interesting.. I should have it tuned.. I am imagining i need to find an experienced tuner in my area.. What is the ballpark price range for a tune if you dont mind me asking?
In SoCal, dyno tunes typically run $450 - $550. It's totally worth it if you have headers. But if you only have a catback exhaust, or intake and catback, then I'd hold off on tuning if there's a chance that more performance mods are in your future.
Old 04-18-2012, 07:54 AM
  #20  
Silnus
Pro
 
Silnus's Avatar
 
Member Since: Sep 2008
Location: Tennessee
Posts: 713
Likes: 0
Received 2 Likes on 2 Posts
Default

Your lighting up the tires in third gear? If that is the case you either have a sh!tty set opf tires, or you could have a cheatR cam in there. Had it on the dyno or track?

Thread Tools
Search this Thread
Quick Reply: [Z06] how much "shake" does a LS6 have ?



All times are GMT -4. The time now is 02:41 AM.