killian96ss

Is it possible to make this kit with 2 gauge battery cable and are the connections soldered and hydraulically crimped. Thanks.

Steve

SacCityCorvette

Hi Steve,
We only make them in the 4 gauge version. They are hydraulically crimped and sealed with a weather tight shrink tubing.
Are you running a mega watt stereo is that why you're asking about the 2gauge?
Thank you,
Christian

killian96ss

No stereo equipment yet, but I will in the future. 2 gauge cables are a good upgrade over 4 gauge which is better for the whole charging and starting sysyem, especially if you add on any additional stereo equipment or add a higher voltage alternator. If you add solder pellets to the terminals and melt them before crimping you'll end up with a better electrical connection that will also last longer because it's more vibration resistant than a crimp alone. The strand count of the cables used can also impact current flow and resistance. A higher strand count is much better and also makes the cables more flexible.

Steve

dbs1vette

So I have a red top battery with side and top posts, but using the top posts currently. Would I be able to use your side post kit, leaving everything else as is, and have it charge just as well/better?

SacCityCorvette

Hi dbs1vette,
Yes a side post Big 3 will work with all the same benefits on your Red Top with side and top post set up.

Thank you,
Christian

dbs1vette

Well then...lets get this party started! Shoot me one out at that ridiculous price of $50 you offered to all CF members so I can sing your praises my good friend! Yeah!!!

SacCityCorvette

SacCityCorvette has developed a BIG 3 installation kit for the C5 Corvette. PLEASE CHECK OUR WEBSITE:http://www.saccitycorvette.com/C5Products.html