[Z06] **C5 Corvette Stealth No Drilling Required 4pc Splash Guard Kit On Sale**
#1
Former Vendor
Thread Starter
**C5 Corvette Stealth No Drilling Required 4pc Splash Guard Kit On Sale**
C5 Corvette Splash Guard Kit - Stealth Style, No Drilling Required
This C5 Corvette splash guards kit includes four splash guards, two for the front wheels, two for the rear wheels. No drilling or glue required. These C5 Corvette splash guards use stock hole locations to mount in combination with provide clips. We provide new push clips to install the rear splash guards. The front splash guards you simply back out the two inner fender bolts, put the splash guard in place and tighten back down. Installation takes less than 10 minutes!
These splash guards are made for the C5 Corvette, they are not a universal splash guard kit. These were designed to follow the body lines of the C5 Corvette and to remain almost un-seen, yet provide protection.
This 4 piece kit will fit all 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 C5 Corvettes, including base, coupe, convertible and Z06.
In Stock Here: http://www.northamericantuning.com/product_p/c5t801.htm
This C5 Corvette splash guards kit includes four splash guards, two for the front wheels, two for the rear wheels. No drilling or glue required. These C5 Corvette splash guards use stock hole locations to mount in combination with provide clips. We provide new push clips to install the rear splash guards. The front splash guards you simply back out the two inner fender bolts, put the splash guard in place and tighten back down. Installation takes less than 10 minutes!
These splash guards are made for the C5 Corvette, they are not a universal splash guard kit. These were designed to follow the body lines of the C5 Corvette and to remain almost un-seen, yet provide protection.
This 4 piece kit will fit all 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 C5 Corvettes, including base, coupe, convertible and Z06.
In Stock Here: http://www.northamericantuning.com/product_p/c5t801.htm
Last edited by NorthAmericanTuning; 09-28-2016 at 09:52 AM.
#2
Intermediate
I have to be honest and say the quality of these was disappointing. Very thin and look rather cheap. I wont put these on my 03 Z06, but possibly my 97 coupe woth 198k miles
#3
Former Vendor
Thread Starter
“We’ve sold over 300 sets in the past 5 years. We’ve only had 2 sets returned. These are made to be “stealth” and because of that they are thin and made to blend with the body lines and body of the car. We also sell larger, molded splash guards, if that is something you are looking for, please send us a PM and we’ll get you a quote.
#4
Burning Brakes
I put these on my 2001 very disappointed in the quality. Also the rears are very small does not go up rear fender enough. They should have made the rears the same as the fronts.
#5
Former Vendor
Thread Starter
#6
Former Vendor
Thread Starter
C5 Corvette Splash Guard Kit - Stealth Style, No Drilling Required
This C5 Corvette splash guards kit includes four splash guards, two for the front wheels, two for the rear wheels. No drilling or glue required. These C5 Corvette splash guards use stock hole locations to mount in combination with provide clips. We provide new push clips to install the rear splash guards. The front splash guards you simply back out the two inner fender bolts, put the splash guard in place and tighten back down. Installation takes less than 10 minutes!
These splash guards are made for the C5 Corvette, they are not a universal splash guard kit. These were designed to follow the body lines of the C5 Corvette and to remain almost un-seen, yet provide protection.
This 4 piece kit will fit all 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 C5 Corvettes, including base, coupe, convertible and Z06.
In Stock Here: http://www.northamericantuning.com/product_p/c5t801.htm
This C5 Corvette splash guards kit includes four splash guards, two for the front wheels, two for the rear wheels. No drilling or glue required. These C5 Corvette splash guards use stock hole locations to mount in combination with provide clips. We provide new push clips to install the rear splash guards. The front splash guards you simply back out the two inner fender bolts, put the splash guard in place and tighten back down. Installation takes less than 10 minutes!
These splash guards are made for the C5 Corvette, they are not a universal splash guard kit. These were designed to follow the body lines of the C5 Corvette and to remain almost un-seen, yet provide protection.
This 4 piece kit will fit all 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 C5 Corvettes, including base, coupe, convertible and Z06.
In Stock Here: http://www.northamericantuning.com/product_p/c5t801.htm