[Z06] 19"/20" XO Verona concave wheels for C5 & C5Z applications
#23
Former Vendor
Thread Starter
#32
Former Vendor
Thread Starter
#36
Rubbing?
Amy rubbing issues on the 19x20 on a stock height Z? Running 30 series F and R?
#37
Pro
i have these on my 98. my original set (19/20) for narrow body was removed (rear) for the c6z width version. There aren't very many people out there with these on their c5's.
I run a small spacer in the rear for my wide quarters.
I run a small spacer in the rear for my wide quarters.
The following users liked this post:
Dkru (12-17-2021)
#38
#39
Running Guns & Moonshine
Since this thread came back...
I do dig the wheels. They're a clean design.
But...
The C5 is a car with soft flowing curves. It's sexy. Not edgy. There's not a straight line on in other than th rear of the trunk or rear of the targa top. Putting abruptly angular wheels on a C5 looks misplaced to me. These would be absolutely at home on a C8 though.
I do dig the wheels. They're a clean design.
But...
The C5 is a car with soft flowing curves. It's sexy. Not edgy. There's not a straight line on in other than th rear of the trunk or rear of the targa top. Putting abruptly angular wheels on a C5 looks misplaced to me. These would be absolutely at home on a C8 though.