[Z06] red mod interior
#2
Safety Car
its hard to match with so many vendors selling "red mod" material..with that said i have found most of "red mod" interior pieces on an auction site and then i matched the material to the "red mod" ...i did get a leather boot and e-break shift boot from redline goods and told them to match the "red mod" as close as they could and its almost a dead on match
#3
Le Mans Master
Pro Mechanic
Here's a thread documenting what I did...
https://www.corvetteforum.com/forums...dye-paint.html
...good luck with yours! Be sure to post up some pics when done!
https://www.corvetteforum.com/forums...dye-paint.html
...good luck with yours! Be sure to post up some pics when done!
#4
Safety Car
Automotive Paint stores that mix paint will have the right formula to match perfectly with the right semigloss look.
Inside colors are just like exterior paint they have color chips listed in the chip books, the additives are different because there is no gloss to the finish when dry.
Inside colors are just like exterior paint they have color chips listed in the chip books, the additives are different because there is no gloss to the finish when dry.
#7
Drifting
Thread Starter
#8
Burning Brakes
I rewrapped my interior with red leather from redline goods. If you look at their site, in the how-to section, I actually created that writeup when I did mine. It was a PITA, but definitely worth it. And much cheaper than swapping out my black interior for factory pieces.
#9
Melting Slicks
Here's a thread documenting what I did...
https://www.corvetteforum.com/forums...dye-paint.html
...good luck with yours! Be sure to post up some pics when done!
https://www.corvetteforum.com/forums...dye-paint.html
...good luck with yours! Be sure to post up some pics when done!
IM DOING THAT FOR SURE!!!!!