[Z06] Attention:Highly Modified C5 Z06 Corvette Owners:Spun Forged Wheel Sponsorship Offer
#1
Supporting Vendor
Thread Starter
Attention:Highly Modified C5 Z06 Corvette Owners:Spun Forged Wheel Sponsorship Offer
Good evening fellow Corvette members,
We are pleased to announce the introduction of the MRR Design FS01 Spun Forged wheels.
The MRR FS01 wheels are going to have of the fastest turn around times in the industry for a custom produced wheel.
Complete production time from start to finish will only take 2-3 weeks for all Standard finishes.
The MRR Design FS01 wheels are engineered to be much lighter in weight and stronger in structure versus any cast aluminum wheel.
MRR Design has been producing aftermarket custom wheels for over 10 years, and we have been there every step of the way. =)
Fitment: Chevy Corvette C5 Z06
Wheel Specs: 18x9.5 Front & 19x11 Rear
Standard Colors: Gloss Black, Matte black, Liquid Silver, Gloss Gunmetal
Optional Colors: Matte Gunmetal, Matte Bronze, Gold, Blue, Orange, White...
Custom Exotic Finishes: Brushed Effects, Polishing, Transparent And Candy Colors..
Production Time: Currently only 2-3 weeks including Standard finishing. Please add 1-2 weeks for exotic finishes.
We are looking for passionate enthusiasts that likes to share their project build through local car shows/events, photo/ video shoots,
and involvement with the forums and social media channels.
If this sounds sounds like your idea of fun, please contact us, we would love to hear from you.
We are offering the following as part of the Full Sponsorship:
- Full set of Spun Forged wheels in the 18x9.5 & 19x11 sizes.
- Complimentary mounting hardware kit
- Professional Photography
- Professional Videography
- Need 4 Speed Motorsports Promo Kit
- Complimentary Installation services (Mount, Balance, Transfer of TPMS sensors)
Minimum Sponsorship Requirements:
- Located in the Southern California region
- Vehicle would need to be made available for professional photo and video.
- Attend at least 3 shows, event, or car meets. The more the merrier.
How to submit your ride for Full Sponsorship consideration.
Post pictures of your vehicle on this thread, send them through private message, or email to Jake@n4sm.com
Please be sure to include all modifications you have done to your vehicle. No modification is too big or too small, we love to read them all
Brushed Aluminium
Raw Finish
Candy Apple Red
Gloss Black
Brushed Gold
__________________
Email: osvic@n4sm.com | Phone: 818-547-5474 Cell: 323-440-3532
438 W Cypress St. Glendale, CA 91204 Website: www.n4sm.com www.Project6GR.com
Email: osvic@n4sm.com | Phone: 818-547-5474 Cell: 323-440-3532
438 W Cypress St. Glendale, CA 91204 Website: www.n4sm.com www.Project6GR.com
Last edited by need4speedmotors; 10-02-2015 at 03:49 PM.
#7
Supporting Vendor
Thread Starter
Another Custom FS01 in the works for a lucky sponsor.
Please Email with images and current mods to:
Jake@n4sm.com
Please Email with images and current mods to:
Jake@n4sm.com
The following users liked this post:
zdeckich (09-29-2015)
#14
I hope its not too late for the sponsorship offer
right now I dont have a full mod list, just to many to list at the moment, but its nitrous (250 shot) powered Lsx, and exterior are visible on these pictures
I am in the market for a new sets of wheels "street tire", gold or gloss gunmetal would be perfect
my social media on Instagram
https://instagram.com/livin_twice/
its constantly gets featured on big car instagram pages like speedsociety, musclekingz and etc..
https://instagram.com/p/7rEx9ZiQZO/?...ericanmusclehd
currently located in bayarea (sanfrancisco) tho haha
right now I dont have a full mod list, just to many to list at the moment, but its nitrous (250 shot) powered Lsx, and exterior are visible on these pictures
I am in the market for a new sets of wheels "street tire", gold or gloss gunmetal would be perfect
my social media on Instagram
https://instagram.com/livin_twice/
its constantly gets featured on big car instagram pages like speedsociety, musclekingz and etc..
https://instagram.com/p/7rEx9ZiQZO/?...ericanmusclehd
currently located in bayarea (sanfrancisco) tho haha
Last edited by Revolver ZSTi; 09-30-2015 at 02:02 PM.
#16
thanks man
#20
Supporting Vendor
Thread Starter
Hello Members,
We would like to share a set of MRR FS01 Gloss Black that just came in today.
Enjoy,
Fitment are: FS01 Gloss Black 19x9.5 & 20x11
Check the out the high quality finish
Please note: Once we get the 19x10 & 20x12 Set ups they will be shared, as well the weight on these bad boys
We would like to share a set of MRR FS01 Gloss Black that just came in today.
Enjoy,
Fitment are: FS01 Gloss Black 19x9.5 & 20x11
Check the out the high quality finish
Please note: Once we get the 19x10 & 20x12 Set ups they will be shared, as well the weight on these bad boys