[Z06] Shift boot alternative?
#1
Shift boot alternative?
I just put a 4 inch delrin **** on my stock shifter, and screwed all the way down it pushes the leather boot onto the wide part of the shift arm, which stretches it in an ugly, possibly damaging way.
I removed the boot wondering if I could modify it in any way, and I like the look of the exposed shift arm. But I need a boot of sorts. Are there any alternatives to the stock leather boot? Rubber? Or any clever way to modify it to sit low on the arm?
Just a thought and some curiosity....
Thanks!
I removed the boot wondering if I could modify it in any way, and I like the look of the exposed shift arm. But I need a boot of sorts. Are there any alternatives to the stock leather boot? Rubber? Or any clever way to modify it to sit low on the arm?
Just a thought and some curiosity....
Thanks!
#2
Drifting
I just put a 4 inch delrin **** on my stock shifter, and screwed all the way down it pushes the leather boot onto the wide part of the shift arm, which stretches it in an ugly, possibly damaging way.
I removed the boot wondering if I could modify it in any way, and I like the look of the exposed shift arm. But I need a boot of sorts. Are there any alternatives to the stock leather boot? Rubber? Or any clever way to modify it to sit low on the arm?
Just a thought and some curiosity....
Thanks!
I removed the boot wondering if I could modify it in any way, and I like the look of the exposed shift arm. But I need a boot of sorts. Are there any alternatives to the stock leather boot? Rubber? Or any clever way to modify it to sit low on the arm?
Just a thought and some curiosity....
Thanks!
Last edited by JeremyGSU; 07-21-2016 at 02:57 PM.
The following users liked this post:
dylans (07-21-2016)
#3
#5
Le Mans Master
The following users liked this post:
FYRARMS (07-28-2016)
#8
Le Mans Master
#10
Le Mans Master
Me too. I wanted a little silver to jive with my gauge bezels, pedals, and other small silver or aluminum items in my interior. Something to break up all the black. I have found some better shift ****/boot alternatives since then, but the Momo collar did give me the look I was after temporarily.
#11
Racing
Me too. I wanted a little silver to jive with my gauge bezels, pedals, and other small silver or aluminum items in my interior. Something to break up all the black. I have found some better shift ****/boot alternatives since then, but the Momo collar did give me the look I was after temporarily.
#12
Le Mans Master
Nothing. The base of the **** had a slight taper that fit into the collar snugly. The pressure of the shift boot (secured with a zip tie around the shifter shaft) was plenty to keep the collar from coming loose.
#13
Safety Car
Yep grab a gear works for this one
Not cute are anything but grab a gear yep can do that . Callaway with modified Hurst pistol grip and yes it has tape on it ,need to fix that ..