[Z06] Stock Rocker Arms / Pac Springs
08-22-2016, 01:00 PM
#1
Racer
Thread Starter
Stock Rocker Arms / Pac Springs
cant find any threads regarding the use of stock rocker arms and pac 1218 springs. will this setup be ok?
08-22-2016, 04:08 PM
#2
Drifting
They'll work just fine together. Are you changing the cam? The PAC's are only good to .600 lift I believe.
Last edited by turboffr; 08-22-2016 at 04:08 PM.
08-22-2016, 04:34 PM
#3
Racer
Thread Starter
No i just want to do a full valvetrain service. springs,rockers,pushrods. the car has only headers and cai. im doing stock gm rods, stock gm rockers and pac 1218 springs.
Last edited by RomanNYC; 08-22-2016 at 04:36 PM.
08-22-2016, 04:39 PM
#4
Drifting
Gotcha. If you haven't bought the parts yet, I just pulled off a set of LS3 springs, retainers, locks, valve seals and pushrods from a 2015 LS3 with only 48 miles. I've got them listed in the for sale section.
08-22-2016, 04:56 PM
#5
Racer
Thread Starter
i appreciate the offer but i have a deal pending with someone.
