View Poll Results: Mild Port and Valve Job vs TPIS/LPE 90MM ls6 intake
Mild Port and VJ on factory 243s
4
100.00%
TPIS/LPE 90mm ls6 intake
0
0%
Voters: 4. You may not vote on this poll
[Z06] Porting heads vs 90mm intake!!! help
#1
Racer
Thread Starter
Porting heads vs 90mm intake!!! help
Working on buddies 02z with 50k miles.
Installing a mild cam with springs and pushrods.
Car has vararam only and 1 7/8 LTs
He has little extra to spend.
Would you do a valve job and lightly port the heads with pp tb
Or
Tpis/Lpe 90mm ls6 intake with ls2 tb
Curious to see how you will respond.
Thanks!
Installing a mild cam with springs and pushrods.
Car has vararam only and 1 7/8 LTs
He has little extra to spend.
Would you do a valve job and lightly port the heads with pp tb
Or
Tpis/Lpe 90mm ls6 intake with ls2 tb
Curious to see how you will respond.
Thanks!
#2
Race Director
The heads would be a better choice, IMO. Have them shaved to about 60cc chambers as well. I like TEA for head work. That particular intake is about a wash. A FAST 90, or the new MSD would be my preference.