Shift Knob
#5
Check out Pro 5.0 shifters.
http://pro50shifters.meridian1.net/d...BS&NID=1448599
They may have to remachine your shifter shaft to fit the threads in their "ball" shaped handle.
I plan to have the stock shifter shaft shortened and rethreaded for the Pro 5.0 shifter ball as the first mod for my C6.
http://pro50shifters.meridian1.net/d...BS&NID=1448599
They may have to remachine your shifter shaft to fit the threads in their "ball" shaped handle.
I plan to have the stock shifter shaft shortened and rethreaded for the Pro 5.0 shifter ball as the first mod for my C6.
#6
Team Owner
Member Since: Mar 2001
Location: Adventure, excitement ... a Jedi craves not these things.
Posts: 106,480
Likes: 0
Received 1 Like
on
1 Post
Cruise-In VII Veteran
Breathless Performance Products has an aftermarket **** available -- that's the only one I know of.
Stay tuned since there will inevitably be 100 to choose from within a year. I went through 6 ***** on my last C5.
It cracks me up how people always respond with "it's perfect for me" in these type of threads -- the guy isn't asking how you like it, he wants information on where he can buy a replacment for his own car.
Stay tuned since there will inevitably be 100 to choose from within a year. I went through 6 ***** on my last C5.
It cracks me up how people always respond with "it's perfect for me" in these type of threads -- the guy isn't asking how you like it, he wants information on where he can buy a replacment for his own car.
#7
Burning Brakes
Member Since: Nov 2004
Location: North Carolina
Posts: 1,161
Likes: 0
Received 1 Like
on
1 Post
St. Jude Donor '06-'07-'08
I keep hoping the "Voodoo" boys will make a ****. They do round titanium and other ***** for Miatas and S2000's etc. Good feeling **** and just the right size for me.
Jim
Jim
#8
Burning Brakes
Hurst option
A "few" years ago I had a 1962 Impala SuperSport. After pulling and rebuilding the 327/300 hp and replacing it with a 327/375 hp small block, I also installed a Hurst shifter and T-handle. It appears that you can still buy the T-Handle to replace the ball (http://forums.corvetteforum.com/phot...t_T-Handle.jpg) with adapters for various shifters (including the Vette).
If it doesn't get in the way of the cup holders, it might be a nice alternative. I can almost visualize "grabbing 2nd and 3rd gears.
If it doesn't get in the way of the cup holders, it might be a nice alternative. I can almost visualize "grabbing 2nd and 3rd gears.
#9
Team Owner
Member Since: Jul 2003
Location: [Enter Unoffensive Comment Here]
Posts: 34,299
Likes: 0
Received 1 Like
on
1 Post
Cruise-In VI Veteran
Cruise-In VII Veteran
St. Jude Donor '06
Originally Posted by Noggles
It cracks me up how people always respond with "it's perfect for me" in these type of threads -- the guy isn't asking how you like it, he wants information on where he can buy a replacment for his own car.
#10
Race Director
Member Since: Oct 2004
Location: Virginia Bch VA
Posts: 10,516
Likes: 0
Received 2 Likes
on
2 Posts
Cruise-In VI Veteran
Cruise-In VII Veteran
St. Jude Donor '06
Breathless
Nicest one I've seen to date:
http://www.breathlessperformance.com...ift%20Knob.asp
Everyone likes a good ****.
http://www.breathlessperformance.com...ift%20Knob.asp
Everyone likes a good ****.
#17
#18
Originally Posted by Jbal
Shift **** is just fine. Just stop all the whining.
Just my 0.02 cents.
Jerry
Just my 0.02 cents.
Jerry
Start your own thread on how much you love it if you do so much.
Give the guy a break and don't sh*t on HIS thread.
#19
Race Director
Member Since: Oct 2004
Location: Virginia Bch VA
Posts: 10,516
Likes: 0
Received 2 Likes
on
2 Posts
Cruise-In VI Veteran
Cruise-In VII Veteran
St. Jude Donor '06
Originally Posted by 427 C5
Who asked you for your opinion on the shift ****?
Start your own thread on how much you love it if you do so much.
Give the guy a break and don't sh*t on HIS thread.
Start your own thread on how much you love it if you do so much.
Give the guy a break and don't sh*t on HIS thread.