2008 Z51 rear axel ratios?
10-21-2007, 04:33 PM
#1
Heel & Toe
Thread Starter
Member Since: Oct 2007
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
2008 Z51 rear axel ratios?
Anyone help me with this one?
Reading over the spec sheet on the 2008 in the section on transmissions & ratios is this, "Also new for ’08 models is the availability of the 2.73 performance axle ratio with the automatic transmission. It is included with the Z51 package."
Down further in the specification list the rear end ratio shown for the Z51 package is 3.42.
So, which is it?
Wayne, who is about to take the plunge!
Reading over the spec sheet on the 2008 in the section on transmissions & ratios is this, "Also new for ’08 models is the availability of the 2.73 performance axle ratio with the automatic transmission. It is included with the Z51 package."
Down further in the specification list the rear end ratio shown for the Z51 package is 3.42.
So, which is it?
Wayne, who is about to take the plunge!
10-21-2007, 04:34 PM
#2
Anyone help me with this one?
Reading over the spec sheet on the 2008 in the section on transmissions & ratios is this, "Also new for ’08 models is the availability of the 2.73 performance axle ratio with the automatic transmission. It is included with the Z51 package."
Down further in the specification list the rear end ratio shown for the Z51 package is 3.42.
So, which is it?
Wayne, who is about to take the plunge!
Reading over the spec sheet on the 2008 in the section on transmissions & ratios is this, "Also new for ’08 models is the availability of the 2.73 performance axle ratio with the automatic transmission. It is included with the Z51 package."
Down further in the specification list the rear end ratio shown for the Z51 package is 3.42.
So, which is it?
Wayne, who is about to take the plunge!
10-21-2007, 04:36 PM
#4
Team Owner
Anyone help me with this one?
Reading over the spec sheet on the 2008 in the section on transmissions & ratios is this, "Also new for ’08 models is the availability of the 2.73 performance axle ratio with the automatic transmission. It is included with the Z51 package."
Down further in the specification list the rear end ratio shown for the Z51 package is 3.42.
So, which is it?
Wayne, who is about to take the plunge!
Reading over the spec sheet on the 2008 in the section on transmissions & ratios is this, "Also new for ’08 models is the availability of the 2.73 performance axle ratio with the automatic transmission. It is included with the Z51 package."
Down further in the specification list the rear end ratio shown for the Z51 package is 3.42.
So, which is it?
Wayne, who is about to take the plunge!
10-21-2007, 08:44 PM
#5
Heel & Toe
Thread Starter
Member Since: Oct 2007
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Thanks!!
Doesn't matter now because the salesman that quoted me just emailed back that his computer left off about $1800 so I'm back to ordering and after reading about cross drilled brake rotors I'll do without the Z51.
Wayne
