Flowmasters installed, whats that tube?
01-18-2008, 09:56 PM
#1
Melting Slicks
Thread Starter
Member Since: Jan 2002
Location: Arlington TX
Posts: 3,419
Likes: 0
Received 0 Likes
on
0 Posts
Flowmasters installed, whats that tube?
ok so i FINALLY put everything back together but now i see a tube hanging down and dont know where it goes or what its for. here are some pics:
Its the thicker tube that has a "T" fitting in it, i can probably zip tie it out of the way but does the T plug into anything or is it a drain hose or something, also at the end of the hose it is clamped down but there is nothing at the end of it...can someone please help me i dont know if something's wrong. its the hose that has "PRC" on it and numbers that start with 25...
Its the thicker tube that has a "T" fitting in it, i can probably zip tie it out of the way but does the T plug into anything or is it a drain hose or something, also at the end of the hose it is clamped down but there is nothing at the end of it...can someone please help me i dont know if something's wrong. its the hose that has "PRC" on it and numbers that start with 25...
01-18-2008, 10:19 PM
#5
Melting Slicks
GMs part #25826126 show's it as a vent.