Got rid of Floppy Cargo Cover Flap
#41
Race Director
Member Since: Aug 2005
Location: 41-33 Cry it out Koko!!!
Posts: 14,753
Likes: 0
Received 3 Likes
on
3 Posts
St. Jude Donor '08-'09-'10-'11
Vette owners let the smallest things bug them in the biggest ways. Seems the thread about vette owners being the most **** people is dead on.
I mean seriously, a steel rod through the hem to cut down on flapping?
I don't even notice my flap flapping anymore.
I mean seriously, a steel rod through the hem to cut down on flapping?
I don't even notice my flap flapping anymore.
Last edited by ZeusC6; 07-14-2008 at 09:27 AM.
#42
Melting Slicks
I bought the rear shade from Mid America that has the embroderied C6 emblem on it and it is manufactured in such a way as you can not put a rod in it.I had done this on my 05 factory shade but could not on this aftermarket one. I have the partition so I may just cut the flappin thingy off!
#43
GREAT POST, WHAT A COOL IDEA!!!!!!!!!
I have the cargo compartment, not divider, made the mod today and the flap hangs behind the compartment on the cargo area side, looks very clean and nice. Have not driven at 150 with windows open yet to check it out, only kidding.
I'm sure it will work just fine, thanks again!!!!!!!!!!!!!!
I have the cargo compartment, not divider, made the mod today and the flap hangs behind the compartment on the cargo area side, looks very clean and nice. Have not driven at 150 with windows open yet to check it out, only kidding.
I'm sure it will work just fine, thanks again!!!!!!!!!!!!!!
#45
Racer
Member Since: Aug 2007
Location: Prospect Heights IL
Posts: 261
Likes: 0
Received 0 Likes
on
0 Posts
This is confusing because the partition (i use exoticvette's) pretty much eliminates the flapping. The flap hangs behind the partition perfectly and no wind hits it. The flap is only an annoyance when the top is stowed and you have to fold the flap horizontally between the cargo cover and the upper side of the top. In that case, the rod wouldn't work at all. Am I missing something here?
#46
Drifting
Thread Starter
This is confusing because the partition (i use exoticvette's) pretty much eliminates the flapping. The flap hangs behind the partition perfectly and no wind hits it. The flap is only an annoyance when the top is stowed and you have to fold the flap horizontally between the cargo cover and the upper side of the top. In that case, the rod wouldn't work at all. Am I missing something here?
My objection to the flapping was when my trunk was open - any breeze and the flap was all over the place.
If you routinely store your top in the back [ I don't so it is not an issue for me ] then you are better off cutting off the flap.
#50
rod also makes for nice anti-theft device if used properly. thanks for the mod, i think i will do the same. i also had an interest in the corvette partition. how does everyone like it?
#51
Drifting
Thread Starter
#52
Safety Car
To the OP thank you very much, that flapping cover was bugging the crap out of me as I always drive with the windows down. Will be paying a visit to the local hardware store.
Awesome it is this kind of sharing of information which makes this site the best.
Awesome it is this kind of sharing of information which makes this site the best.
#54
Home Depot Garden Dept
A 48" green round garden stake ($1.27 plus tax), plastic coated, found in the Home Depot Garden Dept works great. Push it through the flap and use any reasonable snip to cut it to length. It won't move in and out since it already has mini-barbs on it.
#59
Melting Slicks
#60