2008 steering wheel coil
#1
2008 steering wheel coil
Good day all
My 2008 c6 auto transmission
My steering wheel is for non nav no control just the shift paddle the coil broke down there no horn and i can't use the shift paddle in sport mode
Anyhow i bought a new coil but the connector is different and the coil for my model is discontinued
Mine has only 4 pins and the new is 7 pins picture attached
Is there any adapter? Or anyone have an idea
If someone can provide the digram so that i can connect them
My 2008 c6 auto transmission
My steering wheel is for non nav no control just the shift paddle the coil broke down there no horn and i can't use the shift paddle in sport mode
Anyhow i bought a new coil but the connector is different and the coil for my model is discontinued
Mine has only 4 pins and the new is 7 pins picture attached
Is there any adapter? Or anyone have an idea
If someone can provide the digram so that i can connect them
#2
Race Car Tech
You might want to try a Corvette Salvage yard. AEScorvetteparts.com may be able to help
https://aescorvetteparts.com/collections/corvette-c6/products/06-07-corvette-c6-steering-column-with-telescopic-tilt-oem-aa6889
https://aescorvetteparts.com/collections/corvette-c6/products/06-07-corvette-c6-steering-column-with-telescopic-tilt-oem-aa6889
Last edited by 4SUMERZ; 10-09-2023 at 12:47 AM.
#3
Pro
Member Since: Oct 2008
Location: Jyväskylä, FINLAND
Posts: 542
Likes: 0
Received 108 Likes
on
83 Posts
Change the wires from the new connector to the old one. You need a paper clip or another sharp object to release the pins from the connector. Protect the extra ones or leave them be in the new connector and tape it to the harness. If you decide to add the buttons for the radio controls later on, the wires are already there.
These three wires are for the volume etc. buttons:
These three wires are for the volume etc. buttons:
The following users liked this post:
4SUMERZ (10-13-2023)
#4
You might want to try a Corvette Salvage yard. AEScorvetteparts.com may be able to help
https://aescorvetteparts.com/collections/corvette-c6/products/06-07-corvette-c6-steering-column-with-telescopic-tilt-oem-aa6889
https://aescorvetteparts.com/collections/corvette-c6/products/06-07-corvette-c6-steering-column-with-telescopic-tilt-oem-aa6889
Appreciate it
#5
Change the wires from the new connector to the old one. You need a paper clip or another sharp object to release the pins from the connector. Protect the extra ones or leave them be in the new connector and tape it to the harness. If you decide to add the buttons for the radio controls later on, the wires are already there.
These three wires are for the volume etc. buttons:
These three wires are for the volume etc. buttons: