C6 design
06-15-2010, 06:13 PM
#1
Advanced
Thread Starter
C6 design
Hello!
My name is Victoria, I am from Estonia.
The point of this topic is to show you how it is possible to modify your car and give it a new look by using computer programs.
This time I will work with a 3D model. I have modeled a C6 with standard completion to start with. This model is not perfect and it has no materials on it. I call it ''clay model''.
So, all you have to do is tell me what do you want to change,add or modify on this model. You can show me photos with a car detail that you like or you can make a fast sketch and I will try to make a 3D model from it.
For example, you like these rims:
And here we are:
How does a perfect C6 should look like? There are no limits in computer world.
Here's the model:
My name is Victoria, I am from Estonia.
The point of this topic is to show you how it is possible to modify your car and give it a new look by using computer programs.
This time I will work with a 3D model. I have modeled a C6 with standard completion to start with. This model is not perfect and it has no materials on it. I call it ''clay model''.
So, all you have to do is tell me what do you want to change,add or modify on this model. You can show me photos with a car detail that you like or you can make a fast sketch and I will try to make a 3D model from it.
For example, you like these rims:
And here we are:
How does a perfect C6 should look like? There are no limits in computer world.
Here's the model:
06-15-2010, 07:21 PM
#6
Team Owner
Pretty impressive.
06-15-2010, 07:29 PM
#7
SUPPORT AUTISM
Hello Victoria, welcome to the Forum. I have a Jetstream Blue Vette that I was contemplating on making it look like a 1967 Grand Sport with a Pearl white stripe down the middle of the entire car accented by red pinstiping, the front nose would be completely painted pearl white. Thank you for your time.
Something similar to this.
Something similar to this.
Last edited by PARANORMAL; 06-15-2010 at 08:36 PM. Reason: Photo
06-16-2010, 03:41 AM
#12
Advanced
Thread Starter
Black body
Carbon Fiber targa top and cross member
Carbon Fiber front splitter
Carbon Fiber headlights
Red calipersS
Polished wheels
That's the look I want in my own C6
Carbon Fiber targa top and cross member
Carbon Fiber front splitter
Carbon Fiber headlights
Red calipersS
Polished wheels
That's the look I want in my own C6
This Vette will be the first one.
Silver with Black Halo, tinted windows... and perl White hash stripes...
Tinted windows - there will be tinted windows in each model, because there's no interior.
Hash stripes - you mean two stripes on the top of the car?
This Vette will be second.
P. S. Ppl, be patient, some of these termins I see the first time, because we don't use them here in Estonia.
Thank you all for taking a part in this project.
06-16-2010, 05:05 AM
#14
Former Vendor
halo = area of the top that is between the removeable targa top and rear glass. Looks like an arch. Some people have done these and their targa tops in Carbon Fiber or painted them black.
..
06-16-2010, 12:02 PM
#20
Advanced
Member Since: Jun 2010
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Victoria,
the cross member is the part right behind the targa top, some call it the "halo", i don't know the actual name for it either. it looks like a basket handle that goes across the top of the car.
you have some incredible designs, thank you so much for sharing your talent with us and letting us see what our dream setup would look like, I'm excited to see all the designs.
the cross member is the part right behind the targa top, some call it the "halo", i don't know the actual name for it either. it looks like a basket handle that goes across the top of the car.
you have some incredible designs, thank you so much for sharing your talent with us and letting us see what our dream setup would look like, I'm excited to see all the designs.