Incredibly realistic looking carbon fiber vinyl now available at PFYC.com
11-09-2010, 11:56 AM
#1
Platinum Supporting Vendor
Thread Starter
Incredibly realistic looking carbon fiber vinyl now available at PFYC.com
Introducing our new realistic looking Carbon Fiber Film: now available at PFYC.com
This new Carbon Fiber Film is a 5 mil thick self-adhesive embossed vinyl that looks like real carbon fiber when installed. You can put it anywhere on the outside or inside of your vehicle.
This vinyl carbon fiber film provides the look of carbon fiber at a fraction of the cost, making it an excellent styling option for customs, show cars, trucks, motorcycles, boats, jet skis or ATVs. You can easily heat it to contour over any shape, and it is backed by a 5-year warranty. This makes it an excellent low-cost styling accent for spoilers, interior panels, carbon fiber graphics and stripes, or even entire body panels while adding a nice layer of protection at the same time.
Whether you want to alter your car‘s appearance or refinish worn or damaged interior panels, this carbon fiber film provides a stylish solution. This film can be installed wet or dry on smooth or slightly textured surfaces. Click here to see a technical data sheet.
CAN I GET A SAMPLE? If you want to order a small 6" x 6" sample before you decide to order a larger sheet, you can do so on the ordering page. We charge $1 for this sample to cover postage and the material (there's no profit here).
Click here to place your order:
----------------
Carbon Fiber Interior or Exterior Vinyl Film
--------------
To see a full line-up of our new 2005-2010 Corvette C6 items, please click here.
To see a full line-up of our 2005-2010 Corvette C6 sales and specials, please click here.
This new Carbon Fiber Film is a 5 mil thick self-adhesive embossed vinyl that looks like real carbon fiber when installed. You can put it anywhere on the outside or inside of your vehicle.
This vinyl carbon fiber film provides the look of carbon fiber at a fraction of the cost, making it an excellent styling option for customs, show cars, trucks, motorcycles, boats, jet skis or ATVs. You can easily heat it to contour over any shape, and it is backed by a 5-year warranty. This makes it an excellent low-cost styling accent for spoilers, interior panels, carbon fiber graphics and stripes, or even entire body panels while adding a nice layer of protection at the same time.
Whether you want to alter your car‘s appearance or refinish worn or damaged interior panels, this carbon fiber film provides a stylish solution. This film can be installed wet or dry on smooth or slightly textured surfaces. Click here to see a technical data sheet.
CAN I GET A SAMPLE? If you want to order a small 6" x 6" sample before you decide to order a larger sheet, you can do so on the ordering page. We charge $1 for this sample to cover postage and the material (there's no profit here).
Click here to place your order:
----------------
Carbon Fiber Interior or Exterior Vinyl Film
--------------
To see a full line-up of our new 2005-2010 Corvette C6 items, please click here.
To see a full line-up of our 2005-2010 Corvette C6 sales and specials, please click here.
__________________
Brian - ** I am no longer associated with PFYC.com **
Brian - ** I am no longer associated with PFYC.com **
11-09-2010, 01:05 PM
#4
Le Mans Master
Considering that the ZR1 roof is a whopping 8# lighter than the regular Z06 roof, if I was inclined to copy the look, I would much rather buy your product than bother modifying the vehicle and adding the ZR1 roof panel (I am sure at a much higher, vehicle warranty-voiding expense).
Good product (if it is as advertised, which I have no reason to think it wouldn't be).
Good product (if it is as advertised, which I have no reason to think it wouldn't be).
11-09-2010, 01:07 PM
#5
Platinum Supporting Vendor
Thread Starter
Considering that the ZR1 roof is a whopping 8# lighter than the regular Z06 roof, if I was inclined to copy the look, I would much rather buy your product than bother modifying the vehicle and adding the ZR1 roof panel (I am sure at a much higher, vehicle warranty-voiding expense).
Good product (if it is as advertised, which I have no reason to think it wouldn't be).
Good product (if it is as advertised, which I have no reason to think it wouldn't be).
11-09-2010, 02:35 PM
#7
Platinum Supporting Vendor
Thread Starter
11-09-2010, 04:40 PM
#11
Platinum Supporting Vendor
Thread Starter
11-09-2010, 04:52 PM
#13
Platinum Supporting Vendor
Thread Starter
The price of a linear foot is $23.99, so to get the sample price to $1, I have to subtract $22.99. It should be in double parentheses - one set to indicate a price change, and one to indicate a negative (subtraction) from the main product price.
Select the sample and you'll see the price shown on the page change to $1.00.
11-09-2010, 04:58 PM
#15
Platinum Supporting Vendor
Thread Starter
11-09-2010, 09:32 PM
#16
Melting Slicks
Member Since: Jun 2005
Location: Rock Hill SC (Charlotte NC Area)
Posts: 2,363
Received 683 Likes
on
444 Posts
2022 C8 of the Year Finalist - Modified
2022 C7 of the Year Finalist - Unmodified
OK...I tried to order a sample, but your site doesnt seem to want me to have one. 
When I select the sample and hit "add to cart", the site just takes me to a page telling me to "Please complete the required options below in red" and highlights the "selection" drop down in red. Tried at work and again at home...same thing...what am I missing?
When I select the sample and hit "add to cart", the site just takes me to a page telling me to "Please complete the required options below in red" and highlights the "selection" drop down in red. Tried at work and again at home...same thing...what am I missing?
11-09-2010, 09:52 PM
#17
Platinum Supporting Vendor
Thread Starter
OK...I tried to order a sample, but your site doesnt seem to want me to have one. When I select the sample and hit "add to cart", the site just takes me to a page telling me to "Please complete the required options below in red" and highlights the "selection" drop down in red. Tried at work and again at home...same thing...what am I missing?
When I select the sample and hit "add to cart", the site just takes me to a page telling me to "Please complete the required options below in red" and highlights the "selection" drop down in red. Tried at work and again at home...same thing...what am I missing?
11-09-2010, 10:26 PM
#18
Instructor
Member Since: Oct 2010
Location: oroville washington state
Posts: 226
Likes: 0
Received 0 Likes
on
0 Posts
11-09-2010, 10:36 PM
#20
Drifting
Member Since: Jan 2010
Location: Schererville Indiana
Posts: 1,305
Likes: 0
Received 5 Likes
on
5 Posts
I'm intrigued by the photo of the rear view mirror... I'd love to see a video of how to do that without any wrinkles. I think a video of doing a console would be good since so many people like to customize it.
