Front splitter for base Z51 with brake ducts?
#1
Burning Brakes
Thread Starter
Front splitter for base Z51 with brake ducts?
I'm looking for a splitter that would fit on a base 2007 z51 Vette. I've looked at Katech, but the ones they have are either for a GS Z06 or ZR1 with the brake ducts, or for the base C6 with no brake ducts.
From what I understand, the base C6 has a narrower bumper. It may even be a different shape underneath where the splitter would attach.
Do any of you know where a nice splitter, brake ducts and undertray could be found?
My goals are: Look good and track use.
Like this: http://store.katechengines.com/carbo...-kit-p212.aspx
From what I understand, the base C6 has a narrower bumper. It may even be a different shape underneath where the splitter would attach.
Do any of you know where a nice splitter, brake ducts and undertray could be found?
My goals are: Look good and track use.
Like this: http://store.katechengines.com/carbo...-kit-p212.aspx
Last edited by EyeMaster; 12-14-2011 at 02:39 PM.
#3
Team Owner
ZR1? .....................never mind, my bad, you mean a Corvette coupe WITH the Z51 OPTION.
APSIS, RPI, TKO, EMPIRE, AMERICAN HYDRO and the list goes on...............
APSIS, RPI, TKO, EMPIRE, AMERICAN HYDRO and the list goes on...............
#5
Burning Brakes
Z06 style you have ACI and Apsis. ZR1 style you have RPI, Cianci, and Apsis. All are just front lips, no undertrays, and no ducts between the splitter and the rest of the brake ducts under the front bumper.