vette40509

Got a question for you C6 guys. I normally hang out on the C4 area and a lot of us know how hard it is to change the heater core on those. So then I was considering a ZL1 Camaro, then I see in the forums you have to remove the windshield to change the heater core because the dash bolts are covered by the glass. So my question is how hard to change a heater core on a C6. Thanks.

RicK T

Haven't done it. Very rare occurrence in C6's, so far.

Here's a DIY thread that didn't get updated/finished. He's on here all the time so you could PM him to see if he still has the pics and info:

http://forums.corvetteforum.com/c6-t...ver-1-0-a.html


And another discussion thread, they start talking about the cost on page 2, so you can draw your own conclusion:

http://forums.corvetteforum.com/c6-c...et-soaked.html

vette40509

Thanks. Seems GM need to design a little better for replacement of this item.

Gman in NC

I have seen on this forum before where someone did remove the entire dash of their C6, I believe with the windshield in place. So that's a start.