Scuffed Venture Shield Clear Bra / Quick Fix Directions
#1
Racer
Thread Starter
Scuffed Venture Shield Clear Bra / Quick Fix Directions
I was wiping down the car tonight and I noticed on the front bumper a few small scuffs in the Venture Shield (Probably from my watch).
At any rate, I took Meguires Ultimate Compund and a foam pad and by hand worked the are about 5 times...wiped with micro fiber towel and they were gone. Put some Meguires Liquid Wax on and is good as new.
For others with similar problem I really have had good luck with meguires products across the board.
3M has been doing a long trial run with the meguires liquid wax specifically on the Venture Shield clear bra material. I spoke with a rep at 3M specifically about the venture shield product and this is what he recommended using for wax as it has showed the best long term results.
Regards,
Scott
At any rate, I took Meguires Ultimate Compund and a foam pad and by hand worked the are about 5 times...wiped with micro fiber towel and they were gone. Put some Meguires Liquid Wax on and is good as new.
For others with similar problem I really have had good luck with meguires products across the board.
3M has been doing a long trial run with the meguires liquid wax specifically on the Venture Shield clear bra material. I spoke with a rep at 3M specifically about the venture shield product and this is what he recommended using for wax as it has showed the best long term results.
Regards,
Scott
#3
Melting Slicks
If you're going to recommend a product, you should at least spell it correctly - MEGUIARS. I've met Barry Meguiar - he's a great guy. I love his show "Car Crazy", and have used his products for many years.
#4
Team Owner
Member Since: Jun 2005
Location: Northern, VA
Posts: 46,103
Received 2,481 Likes
on
1,944 Posts
St. Jude Donor '15
"In honor of jpee"
that's good info. seeing that 3M bought ventureshield awhile back AND Meguiars more recently, I can see why they'd be doing some testing on both products.