Originally Posted by red4twenty7

here are a few pictures of the front removable license plate for your review Jim-Dave.
Let me know if you have questions.
I had to drill out the rivets and move them to the 4 open holes and put in new rivets and it fits great, very happy with now.

Originally Posted by CO YGOSLOW

Jim...got the video...thx

Roger...can you explain what you mean when you say "drill out the rivets and move them to the 4 open holes"?

CO is a front plate state but they typically don't hassle you. With a vanity plate I kinda like having the front plate on. I also have the CF splitter. I have not really liked any other product out there. I also have curb alert mounted in the center front, so putting a typical plate on the nose would block this. Just entertaining the idea with what looks like the best looking plate mount.

Thx...Dave

Originally Posted by johnodrake

I just did a 6 mo deal with SiriusXM for $75 plus fees (91.03 total with an invoice) for all three vehicles inclusive.

Originally Posted by red4twenty7

Dave,
I also have the curb alert and that is why I went to this plate plus it is very easy to remove for shows, you bracket may come in fine and not need to have the rivets moved, mine for whatever reason needed to be moved by me and I think it is because of the front splitter on the 427, I don't think it was originally made to fir on our front splitter, but could be wrong, if you are handy with a pop river gun and a drill it is a 10 minute fix and you have a great front plate holder.
see pictures attached.
PM if you have specific questions,

Originally Posted by CO YGOSLOW

Took me a little while to figure out what you meant about the rivets...got it now.

Last question...I noticed the assembly that mounts under the car (the piece the plate inserts into) has two front mounting holes. When looking under the car inside the splitter opening I only noticed one existing screw that isn't being applied to hold the splitter. What are you using to attach the front of the bracket?

I'm going to go as long as possible without the plate. Will resort to this as the best solution if the time comes to add one...thx

Originally Posted by yellow427

What are you guys using for the 'curb alert?' Recommendations or thoughts?

Originally Posted by Corvette Junkie

Another pic of my 427.

Originally Posted by red4twenty7

I am starting a new thread to see if their is enough interest out there from the other 427 Vert owners that we could get our site under the C6 category.
the reason is so the other 427 vert owners can share, pics, info and correspond with other owners of these awesome cars.
please invite anybody you know that owns a 427 vert to pipe in and if we get enough interest the webmaster will set us up an exclusive site.
let see if we can get all 2552 427 vert owners listed.
share whatever you like, pic, questions suggestions for anything 427 vert.
thank you , nothing beats top down driving!

Originally Posted by johnodrake

Post up your VIN last four numbers and any picture you like of your 427 Vert. Also post the engine builder's name. Placard on the passenger side under the fuel rail cover.


Camandvic 0026 Born 04/23/12
namtab92 0031 built 4/12 Engine by Mike Priest. This car is Right Hand Drive in Australia.
hdrider1 0036 Engine built by Ron Hein
fdxpilot 0041 Born on May 2
randyatwood 0051
MasonDixon 0055 Born 5/4/13
JeffC6 0062
pops_vette 0088
bearphoto 0108
MorePwr18 0123 (Harvey Gluck's car originally)
mau 0125
dginpa 0136
Bluewasp 0140
RODMAN409 0162
Chalky 0163 purchased 4/20/2013
deuce highboy 0165 Born May 2012 LS7 by Richard K. McBride
Jerry1 0170
smokenjo 0207 May 17
Black427 0209
JOHNFLYON 0258 Engine by Richard McBride
JMILLS 0272
mforman42 0303
91ZR1 0311 Built 6/4/12
ITZA427 0323 built 6/6/2012 engine by James Knipp
NC_427_Vert 339 built on 6/6/12
b_camaro 0387
red4twenty7 0432 engine built by Mike Priest build date 6-18-2012
JohnGibson 461 Build date Jun 2012 Engine by Ron Hein
RODXL1200 0487 Engine built by Chas E. Giese Jr.
Brian E 0490 Built 6-2012 Engine built by Bryon Marshall
BillWTX 0570, 2nd owner, purchased 2/7/14. Original owner traded on a 14. Engine assembled by Chris Mason.
arcticblast 0575
Convertile 0584
Z06RL 0590
fast-vette 0627
427PWR 0628
r50thc5 0635 Callaway Car
jermzz/idroadster 0659
jb_va2001 0678
Decibles1968 0685
HHughes1 0689
Revette 0704 engine by Richard K. McBride.
Curt Callies 0747 Engine by Byron Marshall
BLUEMEANIE 0763 engine by Mike Priest
johnodrake 0774 Born on August 9, 2012. NCM Delivery 06 Sep 12 Engine by Byron Marshall
SC427 0785
mlb427 0795
R2D2Z06 0803 born August 11, 2013
Blindfingers 0832
str8six 0865 Engine by Ron Hein
Don Knowles 0892
mfj427 952, built 8-23-12
Kellswater 0967 Engine by Dave Mann
rapgs12@aol.com 0968
tisvlad 1009
Belv. 1059
TallyHo 1062 Built 29 Aug 12 engine builder Bryan Briones NCM Delivery 21 Sep 12
pmartjr 1076 August '12 build, engine by Chris Mason
lonnyh 1089 August 2012 Engine by Chris Mason
Rocket Ride 1093
norlem 1111
greenberetvette 1124
beaubear 1149, born 09-11-12
twin-cam88 1155, born Sept 10 2012 Engine by Tiffany Snadon
Admiral Ballsy 1159 Sept 10 2012
VetteHeaven67 Build date 10/13/12 – Museum Delivery 10/28/12
3GENVettes 1186, Built Sept. 14
J.J.D.O. 1204 Born Sept 27th
C6 427 1206 Born 10-4-12 Museum Delivery LS7 by Mike Priest
Farmdawg 1209
Dan Johnson 1214
TulsaVette 1247
VETTEMANN 1249 October 2012 Museum Delivery
SSSSE YA 1256
60 in 1st 1287 Born October 15
mogulmike 1296 Born on Wed October 17th Museum Delivery 2/13/13
JWZ 1302. Picked up @ Museum on Nov.10, 2012
harpo 1303
R6T7 1331, built the week of October 22
BEASTC6 1372 born 10/29/12
jmk 1421 LS7 by Mike Priest Born on 11/02/12
stevet38 1431, built 5 Nov
Bob86gn 1436 produced on November 8
Smoke 14 1438
C/S427 1455
LTC Hutto 1459 Born 11/9/12 Engine by Ron Hein
Kreuzen 1461 Born on November 8 Engine by Byron Marshall.
REDFIVE48 1462 Built Nov 9, 2012
flange 1470 Born on November 12
jrc27 1476
Greggrain 1545 Built November engine builder is Tracy Bierkamp
POPN427 1550 Engine Builder James Knipp 11/2012
shekmark427 1579
mrmajik 1585
ROBWILKER 1599. Build date 11/29/2012
misteroman 1601
celero 1616
Glenn Hillhouse 1621 build date; December 11
prd427CE 1668 engine by Ronald Lucas
chuizinga 1682
Njja 1722 Engine by Chas E Giese Jr.
Liventhedream 1723 December 11 2012
Tradetodeath 1728
Madfence 1732
Monkee #1741 LS7 by Mike Priest
Strake 1744 Born on 12/13/12 and brought home on 2/25/13 Merry Christmas!
semp65 1746 Build date: 12-12-12
Bosscar9er 1755, born December 2012 Engine build by Byron Marshall
pickleseimer 1768 built on Dec 14, 2012 Richard McBride engine builder engine built 11/30/2012
DSOM_Wolf 1771 - built the week of 12/17
Petrozuata 1772, built week of 17 December 2012. Engine builder is Ron Hein.
Nueboch 1775
RockyMountain Z 1790 Engine by Tracy Bierkamp
gmills114 1794 built 12/12 LS7 by Tracy Bierkamp
2from53 1807
XmentalPilot 1808
IMA-VET 1817
JODZIR 1838
jkbronco 1842
markmo 1846 built December 2012 and engine by Mike Priest
cpd 1848
Stakes #1849 LS7 built by Ronald Lucas
Kenaparker 1872
Phillip Young 1891
SeaFiveSix 1893 engine by Mike Priest
c6chaz 1896, engine builder darius henry
jversluis 1930
don7790 1950 Built 12/12
jversluis 1953
Rajohnson 1959 LS7 by Don Henley
mgsuss 1967
CO GEEZER 1991
Fuele 2017 built 1/11/13 engine built by Ronald Lucas
nrotik 2038
Kingspoke 2041 Born on 14th of Jan. 2013 LS7 by Richard K McBride
CO YGOSLOW 2065
TK Mike 2051
yellow427 2078 built on 01/13; Chuck Dekubber LS7
Jdani 2081 born 1/13 LS7 built chuck DeKubber
Blue Toy 2083 (Also owns 2164)
REAL427 2088
427CRM2143 2143 11 Jan '13 build in the front passenger wheel well and engine built by Tiffany Snadon
Blue Toy 2164 (Also owns 2083)
hhntr111 2127
Jrmdjr 2168
427Vette89 2195 1/13/13 Engine by Mike Priest
pasunbum 2219 1/13/13
Tomringo 2223 1/13/13 Engine by Mike Priest
TruBluC6 2234 Engine by Mike Priest
NotVincent 2237 LS7 by Mike Priest
Supersonic 427 2244 Born on February 6 2013 Engine by Mike Priest
MARM 2255
Kbonsig 2265 Engine by Ron Hein
GStoehr 2272 Born Feb 2013, Engine by Tiffany Snadon
Gizmo78023 2291 Engine by Mike Priest
Bob427 2312 built 2/13/13
Corvette Junkie 2320 Born on 2/14/13 Engine by Mike Priest
Coznocoz 2358 Born on 2/14/13 Engine by Mike Hein
JimHalvorson - 2390
Translator 2428
bojangles 2438
AKA MAC 2458 Engine built by Richard McBride
Top Flight Reproductions 2460
mlsins 2464
Z51RED 2487 Built Feb 25 2013 60th Anniversary Edition
Paper Tiger 2491
Tripleblack51 2509 LS7 Built by Richard K. McBride
Vette Lag 2519
jr4690 2525 engine LS7 built by Mike Priest
jdurhan 2530 built 02/27/13 Engine built by Gary Andrews
9157 2531 built on 2/27/13 LS7 by Mike Priest
68 Yenko 2549

2552. 60th Anniversary car, engine build by Tadge Juchter, owner is GM Heritage Center. Built 2/28/13. Last 427 built

Originally Posted by quarterhorse89

How do I find out what build number my 2013 427 vert is

Originally Posted by 2vettes

#2359. Based on other vin #s posted and build dates, it must have been 2/13 (don't know how to determine exact day). Engine built by Ron Lucas


Pics of #2359 posted on 1/10/14.

Originally Posted by 2vettes

Funny, post 1592 regarding #2359 is not on the list.

Originally Posted by Flh Den

A little info on a used 427 convertible I saw last week please. It is white with no stripes 7k miles asking $63k. It is a 1sc. last 5 on the vin 00348. What exactly is a 1sc and how does it differ from other 427 packages? How about the striped white ones vs plain. Were the stripes something you could have ordered or is that a completely different model? Looks to be in great shape but the brake rotor hubs are badly rusted on all 4 wheels. On my C6 the rotor surface rust but never the hubs. Is that common? Thank you for any info.

Originally Posted by Kingspoke

http://www.kerbeck.com/kerbeck/kerbeck.nsf/Spec427Convertible

Here's a link, I think you will like & answers your question on packages.

http://m.chevrolet.com/2013-corvette...car/trims.html