***New U.S. Made ZR1 Carbon Fiber Splitter $595 Shipped Group Buy!***
03-26-2013, 08:20 PM
#1
Guest
Posts: n/a
***New U.S. Made ZR1 Carbon Fiber Splitter $595 Shipped Group Buy!***
After several months of R&D we are pleased to announce the ZR1 Style Front Splitter from US1 Carbon is finally in production and available through American Hydrocarbon!! This is the first of many parts to be built for the Corvette.
**Coming soon: side skirts with rear flaps and rear spoiler **
Proudly made in the USA, we are an American owned and operated company - We do not outsource labor or materials to Mexico or Asia.
We are bringing back American built parts for the American sports car one part at a time.
All parts are 100% Solid Carbon Fiber, NOT Carbon Fiber over fiberglass. Manufactured with all epoxy resin, not polyester resin like some other manufacturers; Made from Prepreg Carbon Fiber and Autoclave cured. This production process makes a more consistent, stronger and lighter part. This same process is used in Aerospace and Racing. The splitter weighs in at an unbelievable 14.5 OUNCES before finish is applied - this is the difference in quality Autoclaved Carbon Fiber production.
Compare before you buy!! Final topcoat is PPG Automotive clear coat for UV protection and show-quality finish.
We are introducing this part with a group-buy for the First 10 units at the
Forum Special of $595.00 with FREE SHIPPING to the lower 48.
**After these ten are sold the regular price of $679.00 plus shipping will apply**
Secure you spot on the list - Paypal link: https://www.paypal.com/cgi-bin/websc...=VT6PUK4SJ53BC
**Coming soon: side skirts with rear flaps and rear spoiler **
Proudly made in the USA, we are an American owned and operated company - We do not outsource labor or materials to Mexico or Asia.
We are bringing back American built parts for the American sports car one part at a time.
All parts are 100% Solid Carbon Fiber, NOT Carbon Fiber over fiberglass. Manufactured with all epoxy resin, not polyester resin like some other manufacturers; Made from Prepreg Carbon Fiber and Autoclave cured. This production process makes a more consistent, stronger and lighter part. This same process is used in Aerospace and Racing. The splitter weighs in at an unbelievable 14.5 OUNCES before finish is applied - this is the difference in quality Autoclaved Carbon Fiber production.
Compare before you buy!! Final topcoat is PPG Automotive clear coat for UV protection and show-quality finish.
We are introducing this part with a group-buy for the First 10 units at the
Forum Special of $595.00 with FREE SHIPPING to the lower 48.
**After these ten are sold the regular price of $679.00 plus shipping will apply**
Secure you spot on the list - Paypal link: https://www.paypal.com/cgi-bin/websc...=VT6PUK4SJ53BC
Last edited by American Hydrocarbon; 04-03-2013 at 08:35 PM. Reason: list is almost full...
03-26-2013, 09:40 PM
#2
Instructor
Member Since: Mar 2013
Location: Pataskala Ohio
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
St Jude Donor '13
Will this fit on a non ZR1 car (i.e. C6 base)
went to the website and found my answer....
went to the website and found my answer....
Last edited by Tha Kernal; 03-26-2013 at 09:45 PM.
03-28-2013, 07:32 PM
#6
Guest
Posts: n/a
I want to address a PM question that I received. The member asked about the weight being so light.
Carbon fiber manufactured correctly makes a very strong and lightweight part.
That is why it is used in airplanes, race cars and a host of other applications where strength and weight are a big factor.
The reason these are less than a pound is because the prepreg of the carbon cloth and curing in an autoclave is the best method to produce carbon fiber parts WITHOUT having to use fillers or a fiberglass backing which adds weight.
Every layer is solid carbon.
Almost all the other companies making carbon fiber parts are using a vacuum bag system which does not get the excess resin out of the material leaving you with added weight. Check out the weight of the other splitters out there for sale.
Carbon fiber manufactured correctly makes a very strong and lightweight part.
That is why it is used in airplanes, race cars and a host of other applications where strength and weight are a big factor.
The reason these are less than a pound is because the prepreg of the carbon cloth and curing in an autoclave is the best method to produce carbon fiber parts WITHOUT having to use fillers or a fiberglass backing which adds weight.
Every layer is solid carbon.
Almost all the other companies making carbon fiber parts are using a vacuum bag system which does not get the excess resin out of the material leaving you with added weight. Check out the weight of the other splitters out there for sale.
