C6 Corvette General Discussion General C6 Corvette Discussion not covered in Tech
Sponsored by:
Sponsored by:

LG Super Pro Headers & Street Series Headers

Thread Tools
 
Search this Thread
 
Old 03-19-2014, 04:06 PM
  #1  
0Xplosive Performance
Former Vendor
Thread Starter
 
Xplosive Performance's Avatar
 
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes on 28 Posts
St. Jude Donor '13
Default LG Super Pro Headers & Street Series Headers

LG Super Pro Headers

The Torque Monsters of the Corvette World - No Corvette Header Has More TORQUE or HORSEPOWER
All stainless steel mandrel bent construction using 304 stainless alloy
Full 3-inch x-pipe included
NEW! True race-style 3-inch merge collectors for better scavenging
Available 3-inch premium high performance metal matrix catalytic converters (no converter flows more)
Included "off road" pipes for track use
Race proven design makes more low end torque than any other brand, allowing you to have more of your engine's power on hand at low RPM while still producing fantastic peak horsepower.
These headers have been tested on independent dynos by outside experts and show proven increased horsepower and torque over other top brands
Easy bolt on installation with NO CUTTING or WELDING
Great fit and finish with no ground clearance issues
Note: Long Tube Headers are not CARB certified


Corvette C6 ZO6 LG 1 3/4 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3181.html

Corvette C6 ZO6/ZR1 LG 1 7/8 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3182.html

Corvette C6 LG 1 3/4 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3181.html

Corvette C6 LG 1 7/8 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3182.html

$1795.95
INSTALLED
or
SHIPPED LOWER US



LG C6 Corvette 05-13 LG C6 Street Series Headers - with High Flow Cats

LG Long Tube "STREET SERIES" Headers for your C6. Looking to put new life into your C6? Let L.G. Motorsports help. Get the same quality found in our race-proven Pro Long Tube headers but at a fraction of the price. The new Street Series headers feature Pro Long Tube primary design, 3” collectors, 2 ½” system design with 2 ½” X pipe. These headers are built completely out of T-304 stainless steel and are fully polished front to rear. Gains of 27-35 horsepower and 30-35 lb-ft of torque at the rear wheels are common. By far these are the best value in the Corvette header market. No cutting or welding is required. They feature: LG Pro Long Tube primary design Industry standard 3" collectors Included off road pipes Available with or without cats 2 1/2" system which matches the stock size Stamped 2 1/2" X pipe. Complete 304 stainless design. Fully Polished system front to rear. No cutting or welding. VALUE for your dollar. No Complete header system can be had for less.




$1395.95

Shipped lower US

$1595.95

INSTALLED

Last edited by Xplosive Performance; 09-08-2014 at 08:33 AM.
Old 03-22-2014, 06:21 AM
  #2  
0Xplosive Performance
Former Vendor
Thread Starter
 
Xplosive Performance's Avatar
 
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes on 28 Posts
St. Jude Donor '13
Default

LG Super Pro Headers



The Torque Monsters of the Corvette World - No Corvette Header Has More TORQUE or HORSEPOWER
All stainless steel mandrel bent construction using 304 stainless alloy
Full 3-inch x-pipe included
NEW! True race-style 3-inch merge collectors for better scavenging
Available 3-inch premium high performance metal matrix catalytic converters (no converter flows more)
Included "off road" pipes for track use
Race proven design makes more low end torque than any other brand, allowing you to have more of your engine's power on hand at low RPM while still producing fantastic peak horsepower.
These headers have been tested on independent dynos by outside experts and show proven increased horsepower and torque over other top brands
Easy bolt on installation with NO CUTTING or WELDING
Great fit and finish with no ground clearance issues
Note: Long Tube Headers are not CARB certified




Corvette C6 ZO6 LG 1 3/4 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3181.html



Corvette C6 ZO6/ZR1 LG 1 7/8 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3182.html



Corvette C6 LG 1 3/4 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3181.html



Corvette C6 LG 1 7/8 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3182.html



$1795.95
INSTALLED
or
SHIPPED LOWER US





LG C6 Corvette 05-13 LG C6 Street Series Headers - with High Flow Cats

LG Long Tube "STREET SERIES" Headers for your C6. Looking to put new life into your C6? Let L.G. Motorsports help. Get the same quality found in our race-proven Pro Long Tube headers but at a fraction of the price. The new Street Series headers feature Pro Long Tube primary design, 3” collectors, 2 ½” system design with 2 ½” X pipe. These headers are built completely out of T-304 stainless steel and are fully polished front to rear. Gains of 27-35 horsepower and 30-35 lb-ft of torque at the rear wheels are common. By far these are the best value in the Corvette header market. No cutting or welding is required. They feature: LG Pro Long Tube primary design Industry standard 3" collectors Included off road pipes Available with or without cats 2 1/2" system which matches the stock size Stamped 2 1/2" X pipe. Complete 304 stainless design. Fully Polished system front to rear. No cutting or welding. VALUE for your dollar. No Complete header system can be had for less.




http://www.xplosiveperformance.com/L...GS_p_3628.html


$1395.95

Shipped lower US
$1595.95
INSTALLED

ORDER ON LINE AND EARN REWARD POINTS TOWARD YOUR NEXT PURCHASE
Old 03-24-2014, 08:17 AM
  #3  
0Xplosive Performance
Former Vendor
Thread Starter
 
Xplosive Performance's Avatar
 
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes on 28 Posts
St. Jude Donor '13
Default

LG Super Pro Headers


The Torque Monsters of the Corvette World - No Corvette Header Has More TORQUE or HORSEPOWER
All stainless steel mandrel bent construction using 304 stainless alloy
Full 3-inch x-pipe included
NEW! True race-style 3-inch merge collectors for better scavenging
Available 3-inch premium high performance metal matrix catalytic converters (no converter flows more)
Included "off road" pipes for track use
Race proven design makes more low end torque than any other brand, allowing you to have more of your engine's power on hand at low RPM while still producing fantastic peak horsepower.
These headers have been tested on independent dynos by outside experts and show proven increased horsepower and torque over other top brands
Easy bolt on installation with NO CUTTING or WELDING
Great fit and finish with no ground clearance issues
Note: Long Tube Headers are not CARB certified


Corvette C6 ZO6 LG 1 3/4 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3181.html


Corvette C6 ZO6/ZR1 LG 1 7/8 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3182.html


Corvette C6 LG 1 3/4 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3181.html


Corvette C6 LG 1 7/8 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3182.html


$1795.95
INSTALLED
or
SHIPPED LOWER US




LG C6 Corvette 05-13 LG C6 Street Series Headers - with High Flow Cats

LG Long Tube "STREET SERIES" Headers for your C6. Looking to put new life into your C6? Let L.G. Motorsports help. Get the same quality found in our race-proven Pro Long Tube headers but at a fraction of the price. The new Street Series headers feature Pro Long Tube primary design, 3” collectors, 2 ½” system design with 2 ½” X pipe. These headers are built completely out of T-304 stainless steel and are fully polished front to rear. Gains of 27-35 horsepower and 30-35 lb-ft of torque at the rear wheels are common. By far these are the best value in the Corvette header market. No cutting or welding is required. They feature: LG Pro Long Tube primary design Industry standard 3" collectors Included off road pipes Available with or without cats 2 1/2" system which matches the stock size Stamped 2 1/2" X pipe. Complete 304 stainless design. Fully Polished system front to rear. No cutting or welding. VALUE for your dollar. No Complete header system can be had for less.




http://www.xplosiveperformance.com/L...GS_p_3628.html


$1395.95

Shipped lower US
$1595.95
INSTALLED





ORDER ON LINE AND EARN REWARD POINTS TOWARD YOUR NEXT PURCHASE
Old 03-28-2014, 09:18 AM
  #4  
0Xplosive Performance
Former Vendor
Thread Starter
 
Xplosive Performance's Avatar
 
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes on 28 Posts
St. Jude Donor '13
Default

LG Super Pro Headers


The Torque Monsters of the Corvette World - No Corvette Header Has More TORQUE or HORSEPOWER
All stainless steel mandrel bent construction using 304 stainless alloy
Full 3-inch x-pipe included
NEW! True race-style 3-inch merge collectors for better scavenging
Available 3-inch premium high performance metal matrix catalytic converters (no converter flows more)
Included "off road" pipes for track use
Race proven design makes more low end torque than any other brand, allowing you to have more of your engine's power on hand at low RPM while still producing fantastic peak horsepower.
These headers have been tested on independent dynos by outside experts and show proven increased horsepower and torque over other top brands
Easy bolt on installation with NO CUTTING or WELDING
Great fit and finish with no ground clearance issues
Note: Long Tube Headers are not CARB certified


Corvette C6 ZO6 LG 1 3/4 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3181.html


Corvette C6 ZO6/ZR1 LG 1 7/8 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3182.html


Corvette C6 LG 1 3/4 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3181.html


Corvette C6 LG 1 7/8 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3182.html


$1795.95
INSTALLED
or
SHIPPED LOWER US




LG C6 Corvette 05-13 LG C6 Street Series Headers - with High Flow Cats

LG Long Tube "STREET SERIES" Headers for your C6. Looking to put new life into your C6? Let L.G. Motorsports help. Get the same quality found in our race-proven Pro Long Tube headers but at a fraction of the price. The new Street Series headers feature Pro Long Tube primary design, 3” collectors, 2 ½” system design with 2 ½” X pipe. These headers are built completely out of T-304 stainless steel and are fully polished front to rear. Gains of 27-35 horsepower and 30-35 lb-ft of torque at the rear wheels are common. By far these are the best value in the Corvette header market. No cutting or welding is required. They feature: LG Pro Long Tube primary design Industry standard 3" collectors Included off road pipes Available with or without cats 2 1/2" system which matches the stock size Stamped 2 1/2" X pipe. Complete 304 stainless design. Fully Polished system front to rear. No cutting or welding. VALUE for your dollar. No Complete header system can be had for less.




http://www.xplosiveperformance.com/L...GS_p_3628.html


$1395.95

Shipped lower US
$1595.95
INSTALLED





ORDER ON LINE AND EARN REWARD POINTS TOWARD YOUR NEXT PURCHASE
Old 03-31-2014, 08:19 AM
  #5  
0Xplosive Performance
Former Vendor
Thread Starter
 
Xplosive Performance's Avatar
 
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes on 28 Posts
St. Jude Donor '13
Default

LG Super Pro Headers


The Torque Monsters of the Corvette World - No Corvette Header Has More TORQUE or HORSEPOWER
All stainless steel mandrel bent construction using 304 stainless alloy
Full 3-inch x-pipe included
NEW! True race-style 3-inch merge collectors for better scavenging
Available 3-inch premium high performance metal matrix catalytic converters (no converter flows more)
Included "off road" pipes for track use
Race proven design makes more low end torque than any other brand, allowing you to have more of your engine's power on hand at low RPM while still producing fantastic peak horsepower.
These headers have been tested on independent dynos by outside experts and show proven increased horsepower and torque over other top brands
Easy bolt on installation with NO CUTTING or WELDING
Great fit and finish with no ground clearance issues
Note: Long Tube Headers are not CARB certified


Corvette C6 ZO6 LG 1 3/4 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3181.html


Corvette C6 ZO6/ZR1 LG 1 7/8 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3182.html


Corvette C6 LG 1 3/4 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3181.html


Corvette C6 LG 1 7/8 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3182.html


$1795.95
INSTALLED
or
SHIPPED LOWER US




LG C6 Corvette 05-13 LG C6 Street Series Headers - with High Flow Cats

LG Long Tube "STREET SERIES" Headers for your C6. Looking to put new life into your C6? Let L.G. Motorsports help. Get the same quality found in our race-proven Pro Long Tube headers but at a fraction of the price. The new Street Series headers feature Pro Long Tube primary design, 3” collectors, 2 ½” system design with 2 ½” X pipe. These headers are built completely out of T-304 stainless steel and are fully polished front to rear. Gains of 27-35 horsepower and 30-35 lb-ft of torque at the rear wheels are common. By far these are the best value in the Corvette header market. No cutting or welding is required. They feature: LG Pro Long Tube primary design Industry standard 3" collectors Included off road pipes Available with or without cats 2 1/2" system which matches the stock size Stamped 2 1/2" X pipe. Complete 304 stainless design. Fully Polished system front to rear. No cutting or welding. VALUE for your dollar. No Complete header system can be had for less.




http://www.xplosiveperformance.com/L...GS_p_3628.html


$1395.95

Shipped lower US
$1595.95
INSTALLED





ORDER ON LINE AND EARN REWARD POINTS TOWARD YOUR NEXT PURCHASE
Old 04-03-2014, 09:06 AM
  #6  
0Xplosive Performance
Former Vendor
Thread Starter
 
Xplosive Performance's Avatar
 
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes on 28 Posts
St. Jude Donor '13
Default

LG Super Pro Headers


The Torque Monsters of the Corvette World - No Corvette Header Has More TORQUE or HORSEPOWER
All stainless steel mandrel bent construction using 304 stainless alloy
Full 3-inch x-pipe included
NEW! True race-style 3-inch merge collectors for better scavenging
Available 3-inch premium high performance metal matrix catalytic converters (no converter flows more)
Included "off road" pipes for track use
Race proven design makes more low end torque than any other brand, allowing you to have more of your engine's power on hand at low RPM while still producing fantastic peak horsepower.
These headers have been tested on independent dynos by outside experts and show proven increased horsepower and torque over other top brands
Easy bolt on installation with NO CUTTING or WELDING
Great fit and finish with no ground clearance issues
Note: Long Tube Headers are not CARB certified


Corvette C6 ZO6 LG 1 3/4 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3181.html


Corvette C6 ZO6/ZR1 LG 1 7/8 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3182.html


Corvette C6 LG 1 3/4 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3181.html


Corvette C6 LG 1 7/8 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3182.html


$1795.95
INSTALLED
or
SHIPPED LOWER US




LG C6 Corvette 05-13 LG C6 Street Series Headers - with High Flow Cats

LG Long Tube "STREET SERIES" Headers for your C6. Looking to put new life into your C6? Let L.G. Motorsports help. Get the same quality found in our race-proven Pro Long Tube headers but at a fraction of the price. The new Street Series headers feature Pro Long Tube primary design, 3” collectors, 2 ½” system design with 2 ½” X pipe. These headers are built completely out of T-304 stainless steel and are fully polished front to rear. Gains of 27-35 horsepower and 30-35 lb-ft of torque at the rear wheels are common. By far these are the best value in the Corvette header market. No cutting or welding is required. They feature: LG Pro Long Tube primary design Industry standard 3" collectors Included off road pipes Available with or without cats 2 1/2" system which matches the stock size Stamped 2 1/2" X pipe. Complete 304 stainless design. Fully Polished system front to rear. No cutting or welding. VALUE for your dollar. No Complete header system can be had for less.




http://www.xplosiveperformance.com/L...GS_p_3628.html


$1395.95

Shipped lower US
$1595.95
INSTALLED





ORDER ON LINE AND EARN REWARD POINTS TOWARD YOUR NEXT PURCHASE
Old 04-08-2014, 08:30 AM
  #7  
0Xplosive Performance
Former Vendor
Thread Starter
 
Xplosive Performance's Avatar
 
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes on 28 Posts
St. Jude Donor '13
Default

LG Super Pro Headers


The Torque Monsters of the Corvette World - No Corvette Header Has More TORQUE or HORSEPOWER
All stainless steel mandrel bent construction using 304 stainless alloy
Full 3-inch x-pipe included
NEW! True race-style 3-inch merge collectors for better scavenging
Available 3-inch premium high performance metal matrix catalytic converters (no converter flows more)
Included "off road" pipes for track use
Race proven design makes more low end torque than any other brand, allowing you to have more of your engine's power on hand at low RPM while still producing fantastic peak horsepower.
These headers have been tested on independent dynos by outside experts and show proven increased horsepower and torque over other top brands
Easy bolt on installation with NO CUTTING or WELDING
Great fit and finish with no ground clearance issues
Note: Long Tube Headers are not CARB certified


Corvette C6 ZO6 LG 1 3/4 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3181.html


Corvette C6 ZO6/ZR1 LG 1 7/8 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3182.html


Corvette C6 LG 1 3/4 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3181.html


Corvette C6 LG 1 7/8 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3182.html


$1795.95
INSTALLED
or
SHIPPED LOWER US




LG C6 Corvette 05-13 LG C6 Street Series Headers - with High Flow Cats

LG Long Tube "STREET SERIES" Headers for your C6. Looking to put new life into your C6? Let L.G. Motorsports help. Get the same quality found in our race-proven Pro Long Tube headers but at a fraction of the price. The new Street Series headers feature Pro Long Tube primary design, 3” collectors, 2 ½” system design with 2 ½” X pipe. These headers are built completely out of T-304 stainless steel and are fully polished front to rear. Gains of 27-35 horsepower and 30-35 lb-ft of torque at the rear wheels are common. By far these are the best value in the Corvette header market. No cutting or welding is required. They feature: LG Pro Long Tube primary design Industry standard 3" collectors Included off road pipes Available with or without cats 2 1/2" system which matches the stock size Stamped 2 1/2" X pipe. Complete 304 stainless design. Fully Polished system front to rear. No cutting or welding. VALUE for your dollar. No Complete header system can be had for less.




http://www.xplosiveperformance.com/L...GS_p_3628.html


$1395.95

Shipped lower US
$1595.95
INSTALLED





ORDER ON LINE AND EARN REWARD POINTS TOWARD YOUR NEXT PURCHASE
Old 04-13-2014, 12:04 PM
  #8  
0Xplosive Performance
Former Vendor
Thread Starter
 
Xplosive Performance's Avatar
 
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes on 28 Posts
St. Jude Donor '13
Default

LG Super Pro Headers


The Torque Monsters of the Corvette World - No Corvette Header Has More TORQUE or HORSEPOWER
All stainless steel mandrel bent construction using 304 stainless alloy
Full 3-inch x-pipe included
NEW! True race-style 3-inch merge collectors for better scavenging
Available 3-inch premium high performance metal matrix catalytic converters (no converter flows more)
Included "off road" pipes for track use
Race proven design makes more low end torque than any other brand, allowing you to have more of your engine's power on hand at low RPM while still producing fantastic peak horsepower.
These headers have been tested on independent dynos by outside experts and show proven increased horsepower and torque over other top brands
Easy bolt on installation with NO CUTTING or WELDING
Great fit and finish with no ground clearance issues
Note: Long Tube Headers are not CARB certified


Corvette C6 ZO6 LG 1 3/4 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3181.html


Corvette C6 ZO6/ZR1 LG 1 7/8 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3182.html


Corvette C6 LG 1 3/4 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3181.html


Corvette C6 LG 1 7/8 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3182.html


$1795.95
INSTALLED
or
SHIPPED LOWER US




LG C6 Corvette 05-13 LG C6 Street Series Headers - with High Flow Cats

LG Long Tube "STREET SERIES" Headers for your C6. Looking to put new life into your C6? Let L.G. Motorsports help. Get the same quality found in our race-proven Pro Long Tube headers but at a fraction of the price. The new Street Series headers feature Pro Long Tube primary design, 3” collectors, 2 ½” system design with 2 ½” X pipe. These headers are built completely out of T-304 stainless steel and are fully polished front to rear. Gains of 27-35 horsepower and 30-35 lb-ft of torque at the rear wheels are common. By far these are the best value in the Corvette header market. No cutting or welding is required. They feature: LG Pro Long Tube primary design Industry standard 3" collectors Included off road pipes Available with or without cats 2 1/2" system which matches the stock size Stamped 2 1/2" X pipe. Complete 304 stainless design. Fully Polished system front to rear. No cutting or welding. VALUE for your dollar. No Complete header system can be had for less.




http://www.xplosiveperformance.com/L...GS_p_3628.html


$1395.95

Shipped lower US
$1595.95
INSTALLED





ORDER ON LINE AND EARN REWARD POINTS TOWARD YOUR NEXT PURCHASE
Old 04-18-2014, 11:46 AM
  #9  
0Xplosive Performance
Former Vendor
Thread Starter
 
Xplosive Performance's Avatar
 
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes on 28 Posts
St. Jude Donor '13
Default

LG Super Pro Headers


The Torque Monsters of the Corvette World - No Corvette Header Has More TORQUE or HORSEPOWER
All stainless steel mandrel bent construction using 304 stainless alloy
Full 3-inch x-pipe included
NEW! True race-style 3-inch merge collectors for better scavenging
Available 3-inch premium high performance metal matrix catalytic converters (no converter flows more)
Included "off road" pipes for track use
Race proven design makes more low end torque than any other brand, allowing you to have more of your engine's power on hand at low RPM while still producing fantastic peak horsepower.
These headers have been tested on independent dynos by outside experts and show proven increased horsepower and torque over other top brands
Easy bolt on installation with NO CUTTING or WELDING
Great fit and finish with no ground clearance issues
Note: Long Tube Headers are not CARB certified


Corvette C6 ZO6 LG 1 3/4 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3181.html


Corvette C6 ZO6/ZR1 LG 1 7/8 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3182.html


Corvette C6 LG 1 3/4 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3181.html


Corvette C6 LG 1 7/8 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3182.html


$1795.95
INSTALLED
or
SHIPPED LOWER US




LG C6 Corvette 05-13 LG C6 Street Series Headers - with High Flow Cats

LG Long Tube "STREET SERIES" Headers for your C6. Looking to put new life into your C6? Let L.G. Motorsports help. Get the same quality found in our race-proven Pro Long Tube headers but at a fraction of the price. The new Street Series headers feature Pro Long Tube primary design, 3” collectors, 2 ½” system design with 2 ½” X pipe. These headers are built completely out of T-304 stainless steel and are fully polished front to rear. Gains of 27-35 horsepower and 30-35 lb-ft of torque at the rear wheels are common. By far these are the best value in the Corvette header market. No cutting or welding is required. They feature: LG Pro Long Tube primary design Industry standard 3" collectors Included off road pipes Available with or without cats 2 1/2" system which matches the stock size Stamped 2 1/2" X pipe. Complete 304 stainless design. Fully Polished system front to rear. No cutting or welding. VALUE for your dollar. No Complete header system can be had for less.




http://www.xplosiveperformance.com/L...GS_p_3628.html


$1395.95

Shipped lower US
$1595.95
INSTALLED





ORDER ON LINE AND EARN REWARD POINTS TOWARD YOUR NEXT PURCHASE
Old 04-22-2014, 09:06 AM
  #10  
0Xplosive Performance
Former Vendor
Thread Starter
 
Xplosive Performance's Avatar
 
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes on 28 Posts
St. Jude Donor '13
Default

LG Super Pro Headers


The Torque Monsters of the Corvette World - No Corvette Header Has More TORQUE or HORSEPOWER
All stainless steel mandrel bent construction using 304 stainless alloy
Full 3-inch x-pipe included
NEW! True race-style 3-inch merge collectors for better scavenging
Available 3-inch premium high performance metal matrix catalytic converters (no converter flows more)
Included "off road" pipes for track use
Race proven design makes more low end torque than any other brand, allowing you to have more of your engine's power on hand at low RPM while still producing fantastic peak horsepower.
These headers have been tested on independent dynos by outside experts and show proven increased horsepower and torque over other top brands
Easy bolt on installation with NO CUTTING or WELDING
Great fit and finish with no ground clearance issues
Note: Long Tube Headers are not CARB certified


Corvette C6 ZO6 LG 1 3/4 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3181.html


Corvette C6 ZO6/ZR1 LG 1 7/8 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3182.html


Corvette C6 LG 1 3/4 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3181.html


Corvette C6 LG 1 7/8 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3182.html


$1795.95
INSTALLED
or
SHIPPED LOWER US




LG C6 Corvette 05-13 LG C6 Street Series Headers - with High Flow Cats

LG Long Tube "STREET SERIES" Headers for your C6. Looking to put new life into your C6? Let L.G. Motorsports help. Get the same quality found in our race-proven Pro Long Tube headers but at a fraction of the price. The new Street Series headers feature Pro Long Tube primary design, 3” collectors, 2 ½” system design with 2 ½” X pipe. These headers are built completely out of T-304 stainless steel and are fully polished front to rear. Gains of 27-35 horsepower and 30-35 lb-ft of torque at the rear wheels are common. By far these are the best value in the Corvette header market. No cutting or welding is required. They feature: LG Pro Long Tube primary design Industry standard 3" collectors Included off road pipes Available with or without cats 2 1/2" system which matches the stock size Stamped 2 1/2" X pipe. Complete 304 stainless design. Fully Polished system front to rear. No cutting or welding. VALUE for your dollar. No Complete header system can be had for less.




http://www.xplosiveperformance.com/L...GS_p_3628.html


$1395.95

Shipped lower US
$1595.95
INSTALLED





ORDER ON LINE AND EARN REWARD POINTS TOWARD YOUR NEXT PURCHASE
Old 04-26-2014, 06:10 AM
  #11  
0Xplosive Performance
Former Vendor
Thread Starter
 
Xplosive Performance's Avatar
 
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes on 28 Posts
St. Jude Donor '13
Default

LG Super Pro Headers


The Torque Monsters of the Corvette World - No Corvette Header Has More TORQUE or HORSEPOWER
All stainless steel mandrel bent construction using 304 stainless alloy
Full 3-inch x-pipe included
NEW! True race-style 3-inch merge collectors for better scavenging
Available 3-inch premium high performance metal matrix catalytic converters (no converter flows more)
Included "off road" pipes for track use
Race proven design makes more low end torque than any other brand, allowing you to have more of your engine's power on hand at low RPM while still producing fantastic peak horsepower.
These headers have been tested on independent dynos by outside experts and show proven increased horsepower and torque over other top brands
Easy bolt on installation with NO CUTTING or WELDING
Great fit and finish with no ground clearance issues
Note: Long Tube Headers are not CARB certified


Corvette C6 ZO6 LG 1 3/4 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3181.html


Corvette C6 ZO6/ZR1 LG 1 7/8 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3182.html


Corvette C6 LG 1 3/4 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3181.html


Corvette C6 LG 1 7/8 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3182.html


$1795.95
INSTALLED
or
SHIPPED LOWER US




LG C6 Corvette 05-13 LG C6 Street Series Headers - with High Flow Cats

LG Long Tube "STREET SERIES" Headers for your C6. Looking to put new life into your C6? Let L.G. Motorsports help. Get the same quality found in our race-proven Pro Long Tube headers but at a fraction of the price. The new Street Series headers feature Pro Long Tube primary design, 3” collectors, 2 ½” system design with 2 ½” X pipe. These headers are built completely out of T-304 stainless steel and are fully polished front to rear. Gains of 27-35 horsepower and 30-35 lb-ft of torque at the rear wheels are common. By far these are the best value in the Corvette header market. No cutting or welding is required. They feature: LG Pro Long Tube primary design Industry standard 3" collectors Included off road pipes Available with or without cats 2 1/2" system which matches the stock size Stamped 2 1/2" X pipe. Complete 304 stainless design. Fully Polished system front to rear. No cutting or welding. VALUE for your dollar. No Complete header system can be had for less.




http://www.xplosiveperformance.com/L...GS_p_3628.html


$1395.95

Shipped lower US
$1595.95
INSTALLED





ORDER ON LINE AND EARN REWARD POINTS TOWARD YOUR NEXT PURCHASE
Old 05-03-2014, 11:21 AM
  #12  
0Xplosive Performance
Former Vendor
Thread Starter
 
Xplosive Performance's Avatar
 
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes on 28 Posts
St. Jude Donor '13
Default

LG Super Pro Headers


The Torque Monsters of the Corvette World - No Corvette Header Has More TORQUE or HORSEPOWER
All stainless steel mandrel bent construction using 304 stainless alloy
Full 3-inch x-pipe included
NEW! True race-style 3-inch merge collectors for better scavenging
Available 3-inch premium high performance metal matrix catalytic converters (no converter flows more)
Included "off road" pipes for track use
Race proven design makes more low end torque than any other brand, allowing you to have more of your engine's power on hand at low RPM while still producing fantastic peak horsepower.
These headers have been tested on independent dynos by outside experts and show proven increased horsepower and torque over other top brands
Easy bolt on installation with NO CUTTING or WELDING
Great fit and finish with no ground clearance issues
Note: Long Tube Headers are not CARB certified


Corvette C6 ZO6 LG 1 3/4 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3181.html


Corvette C6 ZO6/ZR1 LG 1 7/8 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3182.html


Corvette C6 LG 1 3/4 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3181.html


Corvette C6 LG 1 7/8 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3182.html


$1795.95
INSTALLED
or
SHIPPED LOWER US




LG C6 Corvette 05-13 LG C6 Street Series Headers - with High Flow Cats

LG Long Tube "STREET SERIES" Headers for your C6. Looking to put new life into your C6? Let L.G. Motorsports help. Get the same quality found in our race-proven Pro Long Tube headers but at a fraction of the price. The new Street Series headers feature Pro Long Tube primary design, 3” collectors, 2 ½” system design with 2 ½” X pipe. These headers are built completely out of T-304 stainless steel and are fully polished front to rear. Gains of 27-35 horsepower and 30-35 lb-ft of torque at the rear wheels are common. By far these are the best value in the Corvette header market. No cutting or welding is required. They feature: LG Pro Long Tube primary design Industry standard 3" collectors Included off road pipes Available with or without cats 2 1/2" system which matches the stock size Stamped 2 1/2" X pipe. Complete 304 stainless design. Fully Polished system front to rear. No cutting or welding. VALUE for your dollar. No Complete header system can be had for less.




http://www.xplosiveperformance.com/L...GS_p_3628.html


$1395.95

Shipped lower US
$1595.95
INSTALLED





ORDER ON LINE AND EARN REWARD POINTS TOWARD YOUR NEXT PURCHASE
Old 05-07-2014, 09:29 AM
  #13  
0Xplosive Performance
Former Vendor
Thread Starter
 
Xplosive Performance's Avatar
 
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes on 28 Posts
St. Jude Donor '13
Default

LG Super Pro Headers

The Torque Monsters of the Corvette World - No Corvette Header Has More TORQUE or HORSEPOWER
All stainless steel mandrel bent construction using 304 stainless alloy
Full 3-inch x-pipe included
NEW! True race-style 3-inch merge collectors for better scavenging
Available 3-inch premium high performance metal matrix catalytic converters (no converter flows more)
Included "off road" pipes for track use
Race proven design makes more low end torque than any other brand, allowing you to have more of your engine's power on hand at low RPM while still producing fantastic peak horsepower.
These headers have been tested on independent dynos by outside experts and show proven increased horsepower and torque over other top brands
Easy bolt on installation with NO CUTTING or WELDING
Great fit and finish with no ground clearance issues
Note: Long Tube Headers are not CARB certified

Corvette C6 ZO6 LG 1 3/4 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3181.html

Corvette C6 ZO6/ZR1 LG 1 7/8 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3182.html

Corvette C6 LG 1 3/4 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3181.html

Corvette C6 LG 1 7/8 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3182.html

$1795.95
INSTALLED
or
SHIPPED LOWER US



LG C6 Corvette 05-13 LG C6 Street Series Headers - with High Flow Cats

LG Long Tube "STREET SERIES" Headers for your C6. Looking to put new life into your C6? Let L.G. Motorsports help. Get the same quality found in our race-proven Pro Long Tube headers but at a fraction of the price. The new Street Series headers feature Pro Long Tube primary design, 3” collectors, 2 ½” system design with 2 ½” X pipe. These headers are built completely out of T-304 stainless steel and are fully polished front to rear. Gains of 27-35 horsepower and 30-35 lb-ft of torque at the rear wheels are common. By far these are the best value in the Corvette header market. No cutting or welding is required. They feature: LG Pro Long Tube primary design Industry standard 3" collectors Included off road pipes Available with or without cats 2 1/2" system which matches the stock size Stamped 2 1/2" X pipe. Complete 304 stainless design. Fully Polished system front to rear. No cutting or welding. VALUE for your dollar. No Complete header system can be had for less.



http://www.xplosiveperformance.com/L...GS_p_3628.html

$1395.95

Shipped lower US
$1595.95
INSTALLED



ORDER ON LINE AND EARN REWARD POINTS TOWARD YOUR NEXT PURCHASE
Old 05-10-2014, 11:01 AM
  #14  
0Xplosive Performance
Former Vendor
Thread Starter
 
Xplosive Performance's Avatar
 
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes on 28 Posts
St. Jude Donor '13
Default

LG Super Pro Headers

The Torque Monsters of the Corvette World - No Corvette Header Has More TORQUE or HORSEPOWER
All stainless steel mandrel bent construction using 304 stainless alloy
Full 3-inch x-pipe included
NEW! True race-style 3-inch merge collectors for better scavenging
Available 3-inch premium high performance metal matrix catalytic converters (no converter flows more)
Included "off road" pipes for track use
Race proven design makes more low end torque than any other brand, allowing you to have more of your engine's power on hand at low RPM while still producing fantastic peak horsepower.
These headers have been tested on independent dynos by outside experts and show proven increased horsepower and torque over other top brands
Easy bolt on installation with NO CUTTING or WELDING
Great fit and finish with no ground clearance issues
Note: Long Tube Headers are not CARB certified

Corvette C6 ZO6 LG 1 3/4 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3181.html

Corvette C6 ZO6/ZR1 LG 1 7/8 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3182.html

Corvette C6 LG 1 3/4 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3181.html

Corvette C6 LG 1 7/8 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3182.html

$1795.95
INSTALLED
or
SHIPPED LOWER US



LG C6 Corvette 05-13 LG C6 Street Series Headers - with High Flow Cats

LG Long Tube "STREET SERIES" Headers for your C6. Looking to put new life into your C6? Let L.G. Motorsports help. Get the same quality found in our race-proven Pro Long Tube headers but at a fraction of the price. The new Street Series headers feature Pro Long Tube primary design, 3” collectors, 2 ½” system design with 2 ½” X pipe. These headers are built completely out of T-304 stainless steel and are fully polished front to rear. Gains of 27-35 horsepower and 30-35 lb-ft of torque at the rear wheels are common. By far these are the best value in the Corvette header market. No cutting or welding is required. They feature: LG Pro Long Tube primary design Industry standard 3" collectors Included off road pipes Available with or without cats 2 1/2" system which matches the stock size Stamped 2 1/2" X pipe. Complete 304 stainless design. Fully Polished system front to rear. No cutting or welding. VALUE for your dollar. No Complete header system can be had for less.



http://www.xplosiveperformance.com/L...GS_p_3628.html

$1395.95

Shipped lower US
$1595.95
INSTALLED



ORDER ON LINE AND EARN REWARD POINTS TOWARD YOUR NEXT PURCHASE
Old 05-20-2014, 08:35 AM
  #15  
0Xplosive Performance
Former Vendor
Thread Starter
 
Xplosive Performance's Avatar
 
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes on 28 Posts
St. Jude Donor '13
Default

LG Super Pro Headers


The Torque Monsters of the Corvette World - No Corvette Header Has More TORQUE or HORSEPOWER
All stainless steel mandrel bent construction using 304 stainless alloy
Full 3-inch x-pipe included
NEW! True race-style 3-inch merge collectors for better scavenging
Available 3-inch premium high performance metal matrix catalytic converters (no converter flows more)
Included "off road" pipes for track use
Race proven design makes more low end torque than any other brand, allowing you to have more of your engine's power on hand at low RPM while still producing fantastic peak horsepower.
These headers have been tested on independent dynos by outside experts and show proven increased horsepower and torque over other top brands
Easy bolt on installation with NO CUTTING or WELDING
Great fit and finish with no ground clearance issues
Note: Long Tube Headers are not CARB certified


Corvette C6 ZO6 LG 1 3/4 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3181.html


Corvette C6 ZO6/ZR1 LG 1 7/8 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3182.html


Corvette C6 LG 1 3/4 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3181.html


Corvette C6 LG 1 7/8 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3182.html


$1795.95
INSTALLED
or
SHIPPED LOWER US




LG C6 Corvette 05-13 LG C6 Street Series Headers - with High Flow Cats

LG Long Tube "STREET SERIES" Headers for your C6. Looking to put new life into your C6? Let L.G. Motorsports help. Get the same quality found in our race-proven Pro Long Tube headers but at a fraction of the price. The new Street Series headers feature Pro Long Tube primary design, 3” collectors, 2 ½” system design with 2 ½” X pipe. These headers are built completely out of T-304 stainless steel and are fully polished front to rear. Gains of 27-35 horsepower and 30-35 lb-ft of torque at the rear wheels are common. By far these are the best value in the Corvette header market. No cutting or welding is required. They feature: LG Pro Long Tube primary design Industry standard 3" collectors Included off road pipes Available with or without cats 2 1/2" system which matches the stock size Stamped 2 1/2" X pipe. Complete 304 stainless design. Fully Polished system front to rear. No cutting or welding. VALUE for your dollar. No Complete header system can be had for less.




http://www.xplosiveperformance.com/L...GS_p_3628.html


$1395.95

Shipped lower US
$1595.95
INSTALLED





ORDER ON LINE AND EARN REWARD POINTS TOWARD YOUR NEXT PURCHASE
Old 05-29-2014, 08:55 AM
  #16  
0Xplosive Performance
Former Vendor
Thread Starter
 
Xplosive Performance's Avatar
 
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes on 28 Posts
St. Jude Donor '13
Default

LG Super Pro Headers


The Torque Monsters of the Corvette World - No Corvette Header Has More TORQUE or HORSEPOWER
All stainless steel mandrel bent construction using 304 stainless alloy
Full 3-inch x-pipe included
NEW! True race-style 3-inch merge collectors for better scavenging
Available 3-inch premium high performance metal matrix catalytic converters (no converter flows more)
Included "off road" pipes for track use
Race proven design makes more low end torque than any other brand, allowing you to have more of your engine's power on hand at low RPM while still producing fantastic peak horsepower.
These headers have been tested on independent dynos by outside experts and show proven increased horsepower and torque over other top brands
Easy bolt on installation with NO CUTTING or WELDING
Great fit and finish with no ground clearance issues
Note: Long Tube Headers are not CARB certified



Corvette C6 ZO6 LG 1 3/4 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3181.html


Corvette C6 ZO6/ZR1 LG 1 7/8 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3182.html


Corvette C6 LG 1 3/4 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3181.html


Corvette C6 LG 1 7/8 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3182.html


$1795.95
INSTALLED
or
SHIPPED LOWER US




LG C6 Corvette 05-13 LG C6 Street Series Headers - with High Flow Cats


LG Long Tube "STREET SERIES" Headers for your C6. Looking to put new life into your C6? Let L.G. Motorsports help. Get the same quality found in our race-proven Pro Long Tube headers but at a fraction of the price. The new Street Series headers feature Pro Long Tube primary design, 3” collectors, 2 ½” system design with 2 ½” X pipe. These headers are built completely out of T-304 stainless steel and are fully polished front to rear. Gains of 27-35 horsepower and 30-35 lb-ft of torque at the rear wheels are common. By far these are the best value in the Corvette header market. No cutting or welding is required. They feature: LG Pro Long Tube primary design Industry standard 3" collectors Included off road pipes Available with or without cats 2 1/2" system which matches the stock size Stamped 2 1/2" X pipe. Complete 304 stainless design. Fully Polished system front to rear. No cutting or welding. VALUE for your dollar. No Complete header system can be had for less.




http://www.xplosiveperformance.com/L...GS_p_3628.html


$1395.95


Shipped lower US

$1595.95

INSTALLED

ORDER NOW TILL JULY 4TH
GET A SET OF 8.5mm MSD WIRES & DEI BLACK PROTECT-A-BOOTS





EARN 275 REWARD POINTS FOR FUTURE PURCHASES







ORDER ON LINE AND EARN REWARD POINTS TOWARD YOUR NEXT PURCHASE
Old 06-04-2014, 08:28 AM
  #17  
0Xplosive Performance
Former Vendor
Thread Starter
 
Xplosive Performance's Avatar
 
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes on 28 Posts
St. Jude Donor '13
Default

LG Super Pro Headers


The Torque Monsters of the Corvette World - No Corvette Header Has More TORQUE or HORSEPOWER
All stainless steel mandrel bent construction using 304 stainless alloy
Full 3-inch x-pipe included
NEW! True race-style 3-inch merge collectors for better scavenging
Available 3-inch premium high performance metal matrix catalytic converters (no converter flows more)
Included "off road" pipes for track use
Race proven design makes more low end torque than any other brand, allowing you to have more of your engine's power on hand at low RPM while still producing fantastic peak horsepower.
These headers have been tested on independent dynos by outside experts and show proven increased horsepower and torque over other top brands
Easy bolt on installation with NO CUTTING or WELDING
Great fit and finish with no ground clearance issues
Note: Long Tube Headers are not CARB certified



Corvette C6 ZO6 LG 1 3/4 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3181.html


Corvette C6 ZO6/ZR1 LG 1 7/8 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3182.html


Corvette C6 LG 1 3/4 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3181.html


Corvette C6 LG 1 7/8 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3182.html


$1795.95
INSTALLED
or
SHIPPED LOWER US




LG C6 Corvette 05-13 LG C6 Street Series Headers - with High Flow Cats


LG Long Tube "STREET SERIES" Headers for your C6. Looking to put new life into your C6? Let L.G. Motorsports help. Get the same quality found in our race-proven Pro Long Tube headers but at a fraction of the price. The new Street Series headers feature Pro Long Tube primary design, 3” collectors, 2 ½” system design with 2 ½” X pipe. These headers are built completely out of T-304 stainless steel and are fully polished front to rear. Gains of 27-35 horsepower and 30-35 lb-ft of torque at the rear wheels are common. By far these are the best value in the Corvette header market. No cutting or welding is required. They feature: LG Pro Long Tube primary design Industry standard 3" collectors Included off road pipes Available with or without cats 2 1/2" system which matches the stock size Stamped 2 1/2" X pipe. Complete 304 stainless design. Fully Polished system front to rear. No cutting or welding. VALUE for your dollar. No Complete header system can be had for less.




http://www.xplosiveperformance.com/L...GS_p_3628.html


$1395.95


Shipped lower US

$1595.95

INSTALLED

ORDER NOW TILL JULY 4TH
GET A SET OF 8.5mm MSD WIRES & DEI BLACK PROTECT-A-BOOTS





EARN 275 REWARD POINTS FOR FUTURE PURCHASES







ORDER ON LINE AND EARN REWARD POINTS TOWARD YOUR NEXT PURCHASE

Get notified of new replies

To LG Super Pro Headers & Street Series Headers

Old 06-10-2014, 08:58 AM
  #18  
0Xplosive Performance
Former Vendor
Thread Starter
 
Xplosive Performance's Avatar
 
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes on 28 Posts
St. Jude Donor '13
Default

LG Super Pro Headers


The Torque Monsters of the Corvette World - No Corvette Header Has More TORQUE or HORSEPOWER
All stainless steel mandrel bent construction using 304 stainless alloy
Full 3-inch x-pipe included
NEW! True race-style 3-inch merge collectors for better scavenging
Available 3-inch premium high performance metal matrix catalytic converters (no converter flows more)
Included "off road" pipes for track use
Race proven design makes more low end torque than any other brand, allowing you to have more of your engine's power on hand at low RPM while still producing fantastic peak horsepower.
These headers have been tested on independent dynos by outside experts and show proven increased horsepower and torque over other top brands
Easy bolt on installation with NO CUTTING or WELDING
Great fit and finish with no ground clearance issues
Note: Long Tube Headers are not CARB certified



Corvette C6 ZO6 LG 1 3/4 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3181.html


Corvette C6 ZO6/ZR1 LG 1 7/8 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3182.html


Corvette C6 LG 1 3/4 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3181.html


Corvette C6 LG 1 7/8 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3182.html


$1795.95
INSTALLED
or
SHIPPED LOWER US




LG C6 Corvette 05-13 LG C6 Street Series Headers - with High Flow Cats


LG Long Tube "STREET SERIES" Headers for your C6. Looking to put new life into your C6? Let L.G. Motorsports help. Get the same quality found in our race-proven Pro Long Tube headers but at a fraction of the price. The new Street Series headers feature Pro Long Tube primary design, 3” collectors, 2 ½” system design with 2 ½” X pipe. These headers are built completely out of T-304 stainless steel and are fully polished front to rear. Gains of 27-35 horsepower and 30-35 lb-ft of torque at the rear wheels are common. By far these are the best value in the Corvette header market. No cutting or welding is required. They feature: LG Pro Long Tube primary design Industry standard 3" collectors Included off road pipes Available with or without cats 2 1/2" system which matches the stock size Stamped 2 1/2" X pipe. Complete 304 stainless design. Fully Polished system front to rear. No cutting or welding. VALUE for your dollar. No Complete header system can be had for less.




http://www.xplosiveperformance.com/L...GS_p_3628.html


$1395.95


Shipped lower US

$1595.95

INSTALLED

ORDER NOW TILL JULY 4TH
GET A SET OF 8.5mm MSD WIRES & DEI BLACK PROTECT-A-BOOTS





EARN 275 REWARD POINTS FOR FUTURE PURCHASES







ORDER ON LINE AND EARN REWARD POINTS TOWARD YOUR NEXT PURCHASE
Old 06-19-2014, 08:26 AM
  #19  
0Xplosive Performance
Former Vendor
Thread Starter
 
Xplosive Performance's Avatar
 
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes on 28 Posts
St. Jude Donor '13
Default

LG Super Pro Headers


The Torque Monsters of the Corvette World - No Corvette Header Has More TORQUE or HORSEPOWER
All stainless steel mandrel bent construction using 304 stainless alloy
Full 3-inch x-pipe included
NEW! True race-style 3-inch merge collectors for better scavenging
Available 3-inch premium high performance metal matrix catalytic converters (no converter flows more)
Included "off road" pipes for track use
Race proven design makes more low end torque than any other brand, allowing you to have more of your engine's power on hand at low RPM while still producing fantastic peak horsepower.
These headers have been tested on independent dynos by outside experts and show proven increased horsepower and torque over other top brands
Easy bolt on installation with NO CUTTING or WELDING
Great fit and finish with no ground clearance issues
Note: Long Tube Headers are not CARB certified



Corvette C6 ZO6 LG 1 3/4 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3181.html


Corvette C6 ZO6/ZR1 LG 1 7/8 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3182.html


Corvette C6 LG 1 3/4 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3181.html


Corvette C6 LG 1 7/8 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3182.html


$1795.95
INSTALLED
or
SHIPPED LOWER US




LG C6 Corvette 05-13 LG C6 Street Series Headers - with High Flow Cats


LG Long Tube "STREET SERIES" Headers for your C6. Looking to put new life into your C6? Let L.G. Motorsports help. Get the same quality found in our race-proven Pro Long Tube headers but at a fraction of the price. The new Street Series headers feature Pro Long Tube primary design, 3” collectors, 2 ½” system design with 2 ½” X pipe. These headers are built completely out of T-304 stainless steel and are fully polished front to rear. Gains of 27-35 horsepower and 30-35 lb-ft of torque at the rear wheels are common. By far these are the best value in the Corvette header market. No cutting or welding is required. They feature: LG Pro Long Tube primary design Industry standard 3" collectors Included off road pipes Available with or without cats 2 1/2" system which matches the stock size Stamped 2 1/2" X pipe. Complete 304 stainless design. Fully Polished system front to rear. No cutting or welding. VALUE for your dollar. No Complete header system can be had for less.




http://www.xplosiveperformance.com/L...GS_p_3628.html


$1395.95


Shipped lower US

$1595.95

INSTALLED

ORDER NOW TILL JULY 4TH
GET A SET OF 8.5mm MSD WIRES & DEI BLACK PROTECT-A-BOOTS





EARN 275 REWARD POINTS FOR FUTURE PURCHASES







ORDER ON LINE AND EARN REWARD POINTS TOWARD YOUR NEXT PURCHASE
Old 06-24-2014, 09:38 AM
  #20  
0Xplosive Performance
Former Vendor
Thread Starter
 
Xplosive Performance's Avatar
 
Member Since: Feb 2010
Location: Longwood Florida
Posts: 28,247
Likes: 0
Received 32 Likes on 28 Posts
St. Jude Donor '13
Default

LG Super Pro Headers


The Torque Monsters of the Corvette World - No Corvette Header Has More TORQUE or HORSEPOWER
All stainless steel mandrel bent construction using 304 stainless alloy
Full 3-inch x-pipe included
NEW! True race-style 3-inch merge collectors for better scavenging
Available 3-inch premium high performance metal matrix catalytic converters (no converter flows more)
Included "off road" pipes for track use
Race proven design makes more low end torque than any other brand, allowing you to have more of your engine's power on hand at low RPM while still producing fantastic peak horsepower.
These headers have been tested on independent dynos by outside experts and show proven increased horsepower and torque over other top brands
Easy bolt on installation with NO CUTTING or WELDING
Great fit and finish with no ground clearance issues
Note: Long Tube Headers are not CARB certified



Corvette C6 ZO6 LG 1 3/4 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3181.html


Corvette C6 ZO6/ZR1 LG 1 7/8 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3182.html


Corvette C6 LG 1 3/4 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3181.html


Corvette C6 LG 1 7/8 SUPERPRO LONG TUBE HEADERS with metal cats
https://www.xplosiveperformance.com/...s-_p_3182.html


$1795.95
INSTALLED
or
SHIPPED LOWER US




LG C6 Corvette 05-13 LG C6 Street Series Headers - with High Flow Cats


LG Long Tube "STREET SERIES" Headers for your C6. Looking to put new life into your C6? Let L.G. Motorsports help. Get the same quality found in our race-proven Pro Long Tube headers but at a fraction of the price. The new Street Series headers feature Pro Long Tube primary design, 3” collectors, 2 ½” system design with 2 ½” X pipe. These headers are built completely out of T-304 stainless steel and are fully polished front to rear. Gains of 27-35 horsepower and 30-35 lb-ft of torque at the rear wheels are common. By far these are the best value in the Corvette header market. No cutting or welding is required. They feature: LG Pro Long Tube primary design Industry standard 3" collectors Included off road pipes Available with or without cats 2 1/2" system which matches the stock size Stamped 2 1/2" X pipe. Complete 304 stainless design. Fully Polished system front to rear. No cutting or welding. VALUE for your dollar. No Complete header system can be had for less.




http://www.xplosiveperformance.com/L...GS_p_3628.html


$1395.95


Shipped lower US

$1595.95

INSTALLED

ORDER NOW TILL JULY 4TH
GET A SET OF 8.5mm MSD WIRES & DEI BLACK PROTECT-A-BOOTS





EARN 275 REWARD POINTS FOR FUTURE PURCHASES







ORDER ON LINE AND EARN REWARD POINTS TOWARD YOUR NEXT PURCHASE


Quick Reply: LG Super Pro Headers & Street Series Headers



All times are GMT -4. The time now is 11:35 PM.