I'm trying to find the cargo/luggage area dimension 2005 Coupe.
#1
I'm trying to find the cargo/luggage area dimension 2005 Coupe.
I know the cu in figures for the C6 &
How many Golf Bags,
How much of the wife's luggage
There's plenty of Room
A lot more than the C4
Etc
Has anyone ever measured at least the length and width?
I've searched this site and all over the great webworld.
Live in a small town , not a lot of them around here.
Thanks
How many Golf Bags,
How much of the wife's luggage
There's plenty of Room
A lot more than the C4
Etc
Has anyone ever measured at least the length and width?
I've searched this site and all over the great webworld.
Live in a small town , not a lot of them around here.
Thanks
#2
Le Mans Master
I know the cu in figures for the C6 &
How many Golf Bags,
How much of the wife's luggage
There's plenty of Room
A lot more than the C4
Etc
Has anyone ever measured at least the length and width?
I've searched this site and all over the great webworld.
Live in a small town , not a lot of them around here.
Thanks
How many Golf Bags,
How much of the wife's luggage
There's plenty of Room
A lot more than the C4
Etc
Has anyone ever measured at least the length and width?
I've searched this site and all over the great webworld.
Live in a small town , not a lot of them around here.
Thanks
38" front to back
41" wheel well to wheel well.
That's that flat floor measurements and nominal. These are from a later model than 2005, but I'm guessing they're the same.
Last edited by BlindSpot; 08-18-2016 at 07:07 PM.
#3
I have a speaker cabinet I'll occasionally want to throw back there.
Do you think at 38" from the front I could pos., clear approx 11 1/2" to 12" Vertical ?
#4
Le Mans Master
12" at the back of the 38" would be questionable; no prob at the other end.
The following users liked this post:
stratovarious (08-18-2016)
#5
I've got 30" x 30" and about 11 1/2" on the small end
of the slant cabinet, which of course would be the end
oriented toward the back, so I'd load it centered giving
plenty of space on either side.
If 12" is to tall , there's a possibility I could leave the
hatch tied down , slightly ajar, hate to, but just the
fact that I will be able to get er' in there period
is a big deal for me.....
#6
Le Mans Master
Thanks much BlindSpot.
I've got 30" x 30" and about 11 1/2" on the small end
of the slant cabinet, which of course would be the end
oriented toward the back, so I'd load it centered giving
plenty of space on either side.
If 12" is to tall , there's a possibility I could leave the
hatch tied down , slightly ajar, hate to, but just the
fact that I will be able to get er' in there period
is a big deal for me.....
I've got 30" x 30" and about 11 1/2" on the small end
of the slant cabinet, which of course would be the end
oriented toward the back, so I'd load it centered giving
plenty of space on either side.
If 12" is to tall , there's a possibility I could leave the
hatch tied down , slightly ajar, hate to, but just the
fact that I will be able to get er' in there period
is a big deal for me.....