[ZR1] GM Cup 19/20 Wheels and Michelin Tire Packages Available for ZR1
#1
Supporting Vendor
Thread Starter
Member Since: Jan 2000
Location: TX
Posts: 5,679
Likes: 0
Received 13 Likes
on
10 Posts
Cruise-In I Veteran
St. Jude Contributor '04
GM Cup 19/20 Wheels and Michelin Tire Packages Available for ZR1
Available for 2010-2013 ZR1 Corvette-
We have had some interest in GM Cup wheels for the ZR1 since the wheels are a direct swap, meaning ZR1 tires and sensors swap over no problem.
Note- Cup wheels are 5lbs lighter than ZR1 wheels.
GM Corvette Cup lightweight wheel sets are offered in satin black, satin black with red pinstripe, all machined and dark gray with machined face.
Wheel sizes are 19x10 and 20x12s. Offsets same as ZR1.
We also offer complete Cup wheel and Michelin tire packages ready to bolt on if interested-
Tires offered are Michelin Pilot Sport PS2 ZP run flats or Pilot Sport Cup ZP run flats, sizes 285-30-19 and 335-25-20s.
2010-2012 tire pressure sensors are included and installed.
Centercaps are included.
Wheel tire package is mounted and Road Force balanced, ready to bolt on.
No issues with speedometer or traction control, this wheel-tire package is well tested!
For more info and pictures, visit our Xtreme website or click on the link-
http://www.xmotorsports.com/index.ph...ategory_id=367
Thanks,
Nate
We have had some interest in GM Cup wheels for the ZR1 since the wheels are a direct swap, meaning ZR1 tires and sensors swap over no problem.
Note- Cup wheels are 5lbs lighter than ZR1 wheels.
GM Corvette Cup lightweight wheel sets are offered in satin black, satin black with red pinstripe, all machined and dark gray with machined face.
Wheel sizes are 19x10 and 20x12s. Offsets same as ZR1.
We also offer complete Cup wheel and Michelin tire packages ready to bolt on if interested-
Tires offered are Michelin Pilot Sport PS2 ZP run flats or Pilot Sport Cup ZP run flats, sizes 285-30-19 and 335-25-20s.
2010-2012 tire pressure sensors are included and installed.
Centercaps are included.
Wheel tire package is mounted and Road Force balanced, ready to bolt on.
No issues with speedometer or traction control, this wheel-tire package is well tested!
For more info and pictures, visit our Xtreme website or click on the link-
http://www.xmotorsports.com/index.ph...ategory_id=367
Thanks,
Nate
__________________
Corvette Garage Inc
Xtreme Motorsports
1.806.771.0205
Website: Click here for Corvette Parts and Accessories!
Email: sales@corvettegarage.com
---------------------------------------------------
Corvette Garage Inc
Xtreme Motorsports
1.806.771.0205
Website: Click here for Corvette Parts and Accessories!
Email: sales@corvettegarage.com
---------------------------------------------------
Last edited by Nate@CorvetteGarage; 05-04-2013 at 10:27 AM.
#4
The "all machined" looks like silver paint(which I would like and prefer).Is it?Or is it a bare metal with a clear coat? thanks.
#5
Supporting Vendor
Thread Starter
Member Since: Jan 2000
Location: TX
Posts: 5,679
Likes: 0
Received 13 Likes
on
10 Posts
Cruise-In I Veteran
St. Jude Contributor '04
Ive seen these in person. From what I remember, its a bright silver paint with machined face.
Heres a detailed pic of the finish.
Thank you,
Nate
Heres a detailed pic of the finish.
Thank you,
Nate
#7
Supporting Vendor
Thread Starter
Member Since: Jan 2000
Location: TX
Posts: 5,679
Likes: 0
Received 13 Likes
on
10 Posts
Cruise-In I Veteran
St. Jude Contributor '04
We also offer custom color ZR1 style wheels as well.
Link to a set we did recently. We took his wheels/tires in on trade.
http://forums.corvetteforum.com/c6-c...-corvette.html
Thanks,
Nate
Link to a set we did recently. We took his wheels/tires in on trade.
http://forums.corvetteforum.com/c6-c...-corvette.html
Thanks,
Nate
#8
Intermediate
Member Since: Oct 2010
Location: Pittsburgh
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
cup wheels
Nate these cup wheels are GM wheels not reproductions?
Do your prices include shipping?
My zip code is 15025
How would i get a price on trading in my wheels?
18/19 Chrome spyder wheels with Good Year run flats all original on my Z06.
Only 1400 miles on car........It is a 2009.
I will trade if worth doing.....otherwise keeping them.
thanks
Do your prices include shipping?
My zip code is 15025
How would i get a price on trading in my wheels?
18/19 Chrome spyder wheels with Good Year run flats all original on my Z06.
Only 1400 miles on car........It is a 2009.
I will trade if worth doing.....otherwise keeping them.
thanks
#9
Supporting Vendor
Thread Starter
Member Since: Jan 2000
Location: TX
Posts: 5,679
Likes: 0
Received 13 Likes
on
10 Posts
Cruise-In I Veteran
St. Jude Contributor '04
lawnking- These are GM wheels as stated, reproductions are not out yet.
Shipping is not included. 19/20 wheel and tire packages usually run 200-250.00 with insurance to lower 48 states.
If wheels are mint, trade in allowance on your wheel tire package would be 1700.00.
Thank you,
Nate
Shipping is not included. 19/20 wheel and tire packages usually run 200-250.00 with insurance to lower 48 states.
If wheels are mint, trade in allowance on your wheel tire package would be 1700.00.
Thank you,
Nate
#10
Drifting
For 2006-2012 C6 Z06, Grand Sport and ZR1 Corvette. GM 427 60th Anniversary Corvette Cup style wheel set, dark gray with machined face finish. Wheel sizes
They fit GS, Z06 and ZR1s. What are you new?
They fit GS, Z06 and ZR1s. What are you new?
#11
Le Mans Master
Available for 2010-2012 ZR1 Corvette-
We have had some interest in GM Cup wheels for the ZR1 since the wheels are a direct swap, meaning ZR1 tires and sensors swap over no problem.
Note- Cup wheels are 5lbs lighter than ZR1 wheels.
GM Corvette Cup lightweight wheel sets are offered in satin black, satin black with red pinstripe, all machined and dark gray with machined face.
Wheel sizes are 19x10 and 20x12s. Offsets same as ZR1.
We also offer complete Cup wheel Michelin tire packages ready to bolt on if interested-
Tires offered are Michelin Pilot Sport PS2 ZP run flats or Pilot Sport Cup ZP run flats, sizes 285-30-19 and 335-25-20s.
2010-2012 tire pressure sensors are included and installed.
Centercaps are included.
Wheel tire package is mounted and Road Force balanced, ready to bolt on.
No issues with speedometer or traction control, this wheel-tire package is well tested!
For more info and pictures, visit our Xtreme website or click on the link-
http://www.xmotorsports.com/index.ph...ategory_id=367
Thanks,
Nate
We have had some interest in GM Cup wheels for the ZR1 since the wheels are a direct swap, meaning ZR1 tires and sensors swap over no problem.
Note- Cup wheels are 5lbs lighter than ZR1 wheels.
GM Corvette Cup lightweight wheel sets are offered in satin black, satin black with red pinstripe, all machined and dark gray with machined face.
Wheel sizes are 19x10 and 20x12s. Offsets same as ZR1.
We also offer complete Cup wheel Michelin tire packages ready to bolt on if interested-
Tires offered are Michelin Pilot Sport PS2 ZP run flats or Pilot Sport Cup ZP run flats, sizes 285-30-19 and 335-25-20s.
2010-2012 tire pressure sensors are included and installed.
Centercaps are included.
Wheel tire package is mounted and Road Force balanced, ready to bolt on.
No issues with speedometer or traction control, this wheel-tire package is well tested!
For more info and pictures, visit our Xtreme website or click on the link-
http://www.xmotorsports.com/index.ph...ategory_id=367
Thanks,
Nate
Thanks.
Last edited by Mr. Gizmo; 08-27-2012 at 10:28 PM.
#12
Supporting Vendor
Thread Starter
Member Since: Jan 2000
Location: TX
Posts: 5,679
Likes: 0
Received 13 Likes
on
10 Posts
Cruise-In I Veteran
St. Jude Contributor '04
Mr Gizmo- actually, if you look again on the website pages for the wheel tire packages, there are selection boxes for tires and year model car. You can choose Cup or PS2 tires, and pricing is adjusted automatically.
Yes, the wheel/tire/sensor package would be ready to bolt on! We do all the work so you dont have to!
ScottJ03- Am I new? Hardly. Im old.
Will do my best to not put you to sleep- (boring)
I have been here on the CF since 2000, but back then as Xtreme Motorsports- Nate@Xtreme was my forum name.
I was one of the first 3 vendors to sponsor the forum when it first went online. It was (me) Xtreme Motorsports, (Shawn) LAPD and (Redshift) PFYC. Ah, the good ole days... can you believe, 3 vendors/sponsors?
What, there must be 200-300 now?
Long story short, I opened a retail shop in Lubbock Texas in 1998.
In 2000-2001, moved the business to Arizona and took on a partner.
A couple of years later, I left Arizona and the Xtreme I started there with the partner - surprise surprise, the partnership didnt work out.
Came back to Lubbock as Xtreme Motorsports, but decided to continue online sales as Corvette Garage. The name was better suited for Corvette stuff, and obviously, there couldnt be 2 Xtremes here on the forum, so...
Ok, there you go.
I know, a simple yes or no would have sufficed!
Thanks,
Nate
Yes, the wheel/tire/sensor package would be ready to bolt on! We do all the work so you dont have to!
ScottJ03- Am I new? Hardly. Im old.
Will do my best to not put you to sleep- (boring)
I have been here on the CF since 2000, but back then as Xtreme Motorsports- Nate@Xtreme was my forum name.
I was one of the first 3 vendors to sponsor the forum when it first went online. It was (me) Xtreme Motorsports, (Shawn) LAPD and (Redshift) PFYC. Ah, the good ole days... can you believe, 3 vendors/sponsors?
What, there must be 200-300 now?
Long story short, I opened a retail shop in Lubbock Texas in 1998.
In 2000-2001, moved the business to Arizona and took on a partner.
A couple of years later, I left Arizona and the Xtreme I started there with the partner - surprise surprise, the partnership didnt work out.
Came back to Lubbock as Xtreme Motorsports, but decided to continue online sales as Corvette Garage. The name was better suited for Corvette stuff, and obviously, there couldnt be 2 Xtremes here on the forum, so...
Ok, there you go.
I know, a simple yes or no would have sufficed!
Thanks,
Nate
Last edited by Nate@CorvetteGarage; 08-28-2012 at 12:02 PM.
#13
Melting Slicks
Nate--I still want to do the Q8K wheels with Nitto Invo's and the comp grey center caps, I just have one more set of performance mods I'm completing before I do anymore cosmetic modding. Just wanted to update you.
Kris
Kris
#14
Platinum Supporting Vendor
I have been here on the CF since 2000, but back then as Xtreme Motorsports- Nate@Xtreme was my forum name.
I was one of the first 3 vendors to sponsor the forum when it first went online. It was (me) Xtreme Motorsports, (Shawn) LAPD and (Redshift) PFYC. Ah, the good ole days... can you believe, 3 vendors/sponsors?
What, there must be 200-300 now?
I was one of the first 3 vendors to sponsor the forum when it first went online. It was (me) Xtreme Motorsports, (Shawn) LAPD and (Redshift) PFYC. Ah, the good ole days... can you believe, 3 vendors/sponsors?
What, there must be 200-300 now?
If you're reading this, Nate's a great guy. Been around for a long time - that alone says that he's doing something right.
Thanks for the shout out!
__________________
Brian - ** I am no longer associated with PFYC.com **
Brian - ** I am no longer associated with PFYC.com **
#15
Supporting Vendor
Thread Starter
Member Since: Jan 2000
Location: TX
Posts: 5,679
Likes: 0
Received 13 Likes
on
10 Posts
Cruise-In I Veteran
St. Jude Contributor '04
kristopherbush- ok thanks for the update.
Brian- good to hear from you.
Thanks for the Kudos. Right back at you sir as you are still around too!
I wonder what Shawn is up to? Was a good guy.
Take care bro.
Nate
Brian- good to hear from you.
Thanks for the Kudos. Right back at you sir as you are still around too!
I wonder what Shawn is up to? Was a good guy.
Take care bro.
Nate
#16
Platinum Supporting Vendor
I haven't heard from Shawn in many years...not sure what's up with him. I remember being quite PO'd when he offered free 2-day or cheap overnight on any item in his store, with that crazy deal he worked for a short time with UPS.
#18
Supporting Vendor
Thread Starter
Member Since: Jan 2000
Location: TX
Posts: 5,679
Likes: 0
Received 13 Likes
on
10 Posts
Cruise-In I Veteran
St. Jude Contributor '04
forg0tmypen- I think we do have a few all machine finish blems new in box. Blem'd from shipping. Will check.
Redshift- Funny, forgot about the famous 2 day air deal.
Still upsets me to think about it!
Thanks,
Nate
Redshift- Funny, forgot about the famous 2 day air deal.
Still upsets me to think about it!
Thanks,
Nate
Last edited by Nate@CorvetteGarage; 08-29-2012 at 11:05 AM.
#19
Ok well I'm headed to stingray chevrolet to check out a set of these in person and hopefully in the sun to see if I'll like them (pretty sure I will, lol). Let me know and take a few pics of the blemishes if it's not too much trouble.