You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join Corvetteforum.com today!
GLOW PLATE WIND RESTRICTOR
No longer just a Convertible thing
This is ONLY available through"TheDoubleAA.com". We have spent about a year to make sure everything was absolutely perfect from fitment all the way to ease of install.
For the next 10 days we can guarantee free shipment to you in time for Christmas and offering "FREE" customizing.
INTRODUCTORY PRICING: $399
- How hard is it to install?
This has a similar design to the partitions available and just slides right into place. For the lighting you remove the panel on the back (4 grommets) and tie in power from tail lights and done... Should be a less than 15 minute job.
- Will my top fit in with this installed?
Yes, it was specifically designed so that the tops could be stored with the Glow Plate in place
- I have a Vette bin, will this work together?
Yes. The fitment is perfect and slides right into place.
- What models of vehicles will this fit?
This will fit all coupe style models including ZR1, Z06, Grand Sport Coupes and Coupes.
- What all options are available?
Everything that is currently offered for the convertible wind restrictor will be available for the Coupe Glow Plate Wind Restrictor including:
Accessories for Wind Restrictor
Brake Lamp Module with Dimmer ***** - (Works with the brake lights to increase intensity and decrease when you touch the brakes, also comes with a 9v battery system to run when the car is off or battery disconnected)
Dimmer Control Module (remote control brightness, dimmer and on/off controller)
12V Power Plug (cigarette lighter plug)
Last edited by Andrew6@TheDoubleAA; 11-30-2012 at 10:02 PM.
I appreciate all the emails, phone calls, Texts, PM's etc... We now have it listed on the website, sorry for not getting this done sooner. I am just very excited about this and it's probably one of the coolest things I've ever seen, so when we got the go ahead for it I had to share it.
Orders received!!!! Congratulations to all of you that have got in on this wonderful new promotion.
We’re filling the orders just as quickly as we can in an attempt to get all orders shipped out in time for Christmas. Please call or write ASAP if you want to get your orders in line and get in on this special.
This introductory price will only last through 12/10 midnight, same with the free graphics and free graphics assistance! Don't forget to ask about the free gift!
This is the Grandsport one a customer ordered shipped out yesterday!
Bad news - The Brake Light Module (BLM) is no more.
Good news - It's being replaced with a Ghosting style Brake Light Module at no extra cost over the orig. BLM.
Bit of info:
- This runs on either power from head lights or a 9v battery (show mode) or if you choose OFF.
- This will work with either the Glow Plate for Coupe, Z06 or Grandsport coupe and will also work with the orig. Corvette Convertible Wind Restrictor
- Multiple adjusting settings that will allow a slow glow to settings of your choice after brakes have been released
I'm sure some folks are like myself and could care less about reading and just wanna see what I'm talking about so there is a video below: