[ZR1] Halltech Carbon Rear Quarter Panels Ready for shipment
01-25-2013, 12:47 PM
#1
Supporting Vendor
Thread Starter
Member Since: Mar 2002
Location: Bristol, Tennessee
Posts: 12,986
Received 582 Likes
on
312 Posts
St. Jude Donor '09
Halltech Carbon Rear Quarter Panels Ready for shipment
Our first pair of carbon fiber RACE Panels are ready for shipment. These will save 11 to 11.5lbs compared to the stock 1/4 panels which are 8lbs primed.
OPTION 1 (DEFAULT) CARBON RACE REAR QUARTER PANELS. We are happy to announce our pricing for the Halltech Carbon Fiber Z06/ZR1 rear quarter panels. $1247.50 each side. Weight is just over 2lbs 8 oz. for our lightest version. They come primed and ready for your painter. They have a very light primer coating, so additional primer, prep and paint match will be up to your paint guy. They will have the accommodation for the rear brake duct bezel for your brake cooling ducting.
OPTION 2: CARBON STREET REAR QUARTER PANELS made with a little more CF, which will add around .75 to 1lb each but the strength will far exceed stock. Add $85.00/panel to the above pricing or $1332.50 each side. Same light primer.
OPTION 3: CARBON PRE-IMPREGNATED ULZ REAR QUARTER PANELS made from dry pre-preg carbon fiber, which will end up the lightest of all versions. It comes out looking like our hood bottom, roof/pillar, which is clear and very glossy. Painting can then be done with some areas in carbon reveal, but the preparation, priming and clear coating is a royal PITA for your painter. Check with them first before going with this option. It will add substantial time and material to your paint cost. Add $500/panel or $1747.50 each.
We have one pair of the Carbon Race Panels in stock ready to ship. We'll have pictures of the panels later today, but they are clones of the stock pieces. Add the Katech carbon fiber deck and you will have the entire car in carbon fiber except for the doors and front and rear fascia.
https://www.halltechsystems.com/Prod...e=ULZ-RQP-Pair
This set is ready for purchase at $200 off our regular pricing. We were light on the primer, but our painters told us they sand and reprime everything they paint anyway with their preferred primer. These are featherweights. The paint will be heavier than the fenders. Super strong, these quarter panels can be enhanced with our Gurney flaps, and Carbon rear duct bezels:
http://www.halltechsystems.com/product-p/hgfzr1.htm
http://www.halltechsystems.com/product-p/hcbd1.htm
OPTION 1 (DEFAULT) CARBON RACE REAR QUARTER PANELS. We are happy to announce our pricing for the Halltech Carbon Fiber Z06/ZR1 rear quarter panels. $1247.50 each side. Weight is just over 2lbs 8 oz. for our lightest version. They come primed and ready for your painter. They have a very light primer coating, so additional primer, prep and paint match will be up to your paint guy. They will have the accommodation for the rear brake duct bezel for your brake cooling ducting.
OPTION 2: CARBON STREET REAR QUARTER PANELS made with a little more CF, which will add around .75 to 1lb each but the strength will far exceed stock. Add $85.00/panel to the above pricing or $1332.50 each side. Same light primer.
OPTION 3: CARBON PRE-IMPREGNATED ULZ REAR QUARTER PANELS made from dry pre-preg carbon fiber, which will end up the lightest of all versions. It comes out looking like our hood bottom, roof/pillar, which is clear and very glossy. Painting can then be done with some areas in carbon reveal, but the preparation, priming and clear coating is a royal PITA for your painter. Check with them first before going with this option. It will add substantial time and material to your paint cost. Add $500/panel or $1747.50 each.
We have one pair of the Carbon Race Panels in stock ready to ship. We'll have pictures of the panels later today, but they are clones of the stock pieces. Add the Katech carbon fiber deck and you will have the entire car in carbon fiber except for the doors and front and rear fascia.
https://www.halltechsystems.com/Prod...e=ULZ-RQP-Pair
This set is ready for purchase at $200 off our regular pricing. We were light on the primer, but our painters told us they sand and reprime everything they paint anyway with their preferred primer. These are featherweights. The paint will be heavier than the fenders. Super strong, these quarter panels can be enhanced with our Gurney flaps, and Carbon rear duct bezels:
http://www.halltechsystems.com/product-p/hgfzr1.htm
http://www.halltechsystems.com/product-p/hcbd1.htm
__________________
"World Class Performance for your Corvette"
Intake Design and Engineering since 1999
Halltech Systems, LLC
262-510-7600
For service email:
orders@halltechsystems.com
www.halltechsystems.com
"World Class Performance for your Corvette"
Intake Design and Engineering since 1999
Halltech Systems, LLC
262-510-7600
For service email:
orders@halltechsystems.com
www.halltechsystems.com
Last edited by Halltech; 01-26-2013 at 01:44 PM.
