[ZR1] Michaels ZR1 @ Lethal Performance
02-19-2013, 12:12 PM
#45
Burning Brakes
Thread Starter
Member Since: Dec 2010
Location: San Antonio TX
Posts: 831
Likes: 0
Received 0 Likes
on
0 Posts
Little update. Michael is getting a clutch to handle is new power and here are the way his bottles and nitrous switches came out 
I need to get the go pro's from Zach. Ill see them Thursday.
What nitrous
Party time
Brackets mounted with internal heaters
I need to get the go pro's from Zach. Ill see them Thursday.What nitrous
Party time
Brackets mounted with internal heaters
02-19-2013, 01:56 PM
#49
Melting Slicks
02-20-2013, 10:22 AM
#52
Instructor
Better to mount the fire bottle horizontal. When vertical or angled upward, if you activate the bottle while slowing down, you will lose effectiveness from uncovering the bottom of the suction tube. This is assuming you have a pull / push method up front besides just at the bottle as pictured.
Especially in mile-events, a driver could find themselves with a fire while under a long braking period.
Mounted horizontal, say to the right, you would keep the suction tube covered better under acceleration, braking, upside down, basically anything but flipped on the side of the top of the bottle.
Good luck this year.
Especially in mile-events, a driver could find themselves with a fire while under a long braking period.
Mounted horizontal, say to the right, you would keep the suction tube covered better under acceleration, braking, upside down, basically anything but flipped on the side of the top of the bottle.
Good luck this year.
