[ZR1] *GYW* Forgestar Wheels: Rotary Forged, Custom Finishes, Quick Turnaround!
#102
Supporting Vendor
Thread Starter
Here are some updated recent shots of our customer's C6Z06 on deep concave 18x10/12 Forgestar CF5s with a custom Brushed Clear finish
Attachment 48361224
Attachment 48361225
Forgestar's only sale of the year is already almost over!
Get $200 off your order for a full set for a limited time, contact Jason@GetYourWheels.com with your questions!
Attachment 48361224
Attachment 48361225
Forgestar's only sale of the year is already almost over!
Get $200 off your order for a full set for a limited time, contact Jason@GetYourWheels.com with your questions!
#103
Supporting Vendor
Thread Starter
Heres a new one of a kind combo we put together for our customer's E90 M3 sedan, 19" Forgestar CF5Vs in Super Deep Concave all around, we had them custom finished to a Brushed Torquise!
Attachment 48361082
Attachment 48361083
This is the LAST week for Forgestar's yearly sale, get in touch with me at Jason@GetYourWheels.com to get your order in before its too late!
Attachment 48361082
Attachment 48361083
This is the LAST week for Forgestar's yearly sale, get in touch with me at Jason@GetYourWheels.com to get your order in before its too late!
#104
Supporting Vendor
Thread Starter
Just got word Forgestar will be releasing 15" and 17" drag setups before the end of this year!
Currently available only in the following specs:
Higher Load Ratings
Pricing isnt available just yet, but they will be finalized soon
As soon as we get finalized pricing we'll be able to start placing preorders for them
Check out the link here for all the available details: http://www.forgestar.com/dragracing/
I know a lot of guys have been asking for these, nice to see Forgestar listened
18x13 F14s will also be arriving later this year if you're looking for a wider rear!
Contact me at Jason@GetYourWheels.com with any interest and I can help you out with any questions!
Typically on a standard wheel, the tire beads onto a smooth metal surface which has a higher potential for slip. With bead knurling, this creates raised and depressed plane that allow for the tire to bite onto a surface with significantly more grip. This is especially important for drag wheels, as the vehicle slams back down from a wheelie it undergoes a tremendous amount of tire flex and wheel stress. With the weight of the engine and torque of an accelerating vehicle, a tire that is improperly seated can be extremely dangerous
Higher Load Ratings
The new F14 Drag Wheels feature a higher load rating compared to current cast drag racing wheel standards. We designed our drag racing wheels to perform at a higher load rating while optimizing weight with our Rotary Forged process. As a result, vehicles are able to impose significantly more stress to the lighter Forgestar drag wheel compared to current cast drag wheels on the market.
As soon as we get finalized pricing we'll be able to start placing preorders for them
Check out the link here for all the available details: http://www.forgestar.com/dragracing/
I know a lot of guys have been asking for these, nice to see Forgestar listened
18x13 F14s will also be arriving later this year if you're looking for a wider rear!
Contact me at Jason@GetYourWheels.com with any interest and I can help you out with any questions!
#105
Supporting Vendor
Thread Starter
Some updated shots of Erik's C5 we set up with with Satin Bronze F14s!
Attachment 48359122
Attachment 48360691
The ride is coming along nicely and looks even complete with the front lip now!
Attachment 48360692
Attachment 48359122
Attachment 48360691
The ride is coming along nicely and looks even complete with the front lip now!
Attachment 48360692
#106
Supporting Vendor
Thread Starter
**Forgestar Black Friday Sale**
Forgestar just released their Black Friday Sale pricing, good until end of November!
-$200/set of 18"
-$300/set of 19" and 20"
-$400/set of 21" and 22"
This sale is for a limited time only! Contact me at Jason@GetYourWheels.com or at 562-219-2525 with any interest!
Here are some shots of our customer's C6 Z06 with a set of 19x10/12 Forgestar CF10s in Gloss Black we wrapped with 275/345 Nitto NT05/NT05Rs
You can never go wrong with all black!
Forgestar just released their Black Friday Sale pricing, good until end of November!
-$200/set of 18"
-$300/set of 19" and 20"
-$400/set of 21" and 22"
This sale is for a limited time only! Contact me at Jason@GetYourWheels.com or at 562-219-2525 with any interest!
Here are some shots of our customer's C6 Z06 with a set of 19x10/12 Forgestar CF10s in Gloss Black we wrapped with 275/345 Nitto NT05/NT05Rs
Wheels fit perfectly and looks Amazing
Thanks for such a great wheels buying experience Jason. I was even impressed you guy's used black wheel weights
Raymond
Thanks for such a great wheels buying experience Jason. I was even impressed you guy's used black wheel weights
Raymond
#109
Supporting Vendor
Thread Starter
Our customer recently installed a set of Forgestar CF10's for his ZR1. The finish he decided to go with, gives his car a stealth black on black look. Thanks for the support.
So I decided to ditch the GM Cup wheels not that I didn't like them
(believe me I do like the Cups) I want to go with a 19" setup on all four corners.
I went with the Forgestar CF10 in gloss black 19X10 +30 up front and 19X12 +50 in the rear. I am running NITTO NT05 275/30/19 and NT05R 345/30/19.
Car rides excellent and hooks great! The offset in the rear gives it a much better look than OEM wheels. I could not be happier with the service I received form GetYourwheels.com my sales rep Jason was awesome the wheels came mounted and balanced, filled with nitrogen with black wheel weights and black TPM stems installed on the new sensors.
If you looking form some wheels give these guys a look they are forum vendors and my reps contact info is below. You wont be disappointed.
Jason Tung
EMAIL: Jason@GetYourWheels.com
WEB: www.GetYourWheels.com
PHONE: 562.219.2525
FAX: 562.268.1652
(believe me I do like the Cups) I want to go with a 19" setup on all four corners.
I went with the Forgestar CF10 in gloss black 19X10 +30 up front and 19X12 +50 in the rear. I am running NITTO NT05 275/30/19 and NT05R 345/30/19.
Car rides excellent and hooks great! The offset in the rear gives it a much better look than OEM wheels. I could not be happier with the service I received form GetYourwheels.com my sales rep Jason was awesome the wheels came mounted and balanced, filled with nitrogen with black wheel weights and black TPM stems installed on the new sensors.
If you looking form some wheels give these guys a look they are forum vendors and my reps contact info is below. You wont be disappointed.
Jason Tung
EMAIL: Jason@GetYourWheels.com
WEB: www.GetYourWheels.com
PHONE: 562.219.2525
FAX: 562.268.1652
#110
Supporting Vendor
Thread Starter
Here are some shots from our good customer whose been in the process of building up his C6
Set 1:
C6 Stock fenders with Forgestar F14s in Black Graphite 19x9.5/20x11 in semi concave
Attachment 48360202
Attachment 48360203
Set 2:
He widebodied the C6 with Grandsport front fenders and Z06 rears!
We set him up with deep concave Forgestar CF5s in 18x10/19x12 with a custom upgraded Brushed Gunmetal Finish!
Attachment 48359066
Attachment 48360204
Attachment 48359065
Both sets came out looking great!
Set 1:
C6 Stock fenders with Forgestar F14s in Black Graphite 19x9.5/20x11 in semi concave
Attachment 48360202
Attachment 48360203
Set 2:
He widebodied the C6 with Grandsport front fenders and Z06 rears!
We set him up with deep concave Forgestar CF5s in 18x10/19x12 with a custom upgraded Brushed Gunmetal Finish!
Attachment 48359066
Attachment 48360204
Attachment 48359065
Both sets came out looking great!
#111
Supporting Vendor
Thread Starter
Here is a setup we did for our customer's Pontiac Solstice, running 18x8.5/9.5 Forgestar F14s running beefy 245/275 tires
Fitment is a little aggressive, but it looks great!
Attachment 48360146
Attachment 48360147
Attachment 48360148
Attachment 48360149
Attachment 48360150
We built his wheels with a gorgeous custom upgraded Brushed Silver finish
Attachment 48360151
Attachment 48360152
Attachment 48360153
Fitment is a little aggressive, but it looks great!
Attachment 48360146
Attachment 48360147
Attachment 48360148
Attachment 48360149
Attachment 48360150
We built his wheels with a gorgeous custom upgraded Brushed Silver finish
Attachment 48360151
Attachment 48360152
Attachment 48360153
#112
Supporting Vendor
Thread Starter
Check out these Gloss Gunmetal Forgestar CF10s we did in 19x9.5 deep concave all around for our customer's B8 Avant
Attachment 48359770
Attachment 48359771
Attachment 48359772
Attachment 48359773
A drop is coming up next!
Attachment 48359770
Attachment 48359771
Attachment 48359772
Attachment 48359773
A drop is coming up next!
#113
Supporting Vendor
Thread Starter
Everybody said it wasnt possible, but heres our 2015 Mustang GT PP customer running a set of Bronze Burst 20x10.5 square F14s with Super Deep Concave rears and deep concave fronts!
Attachment 48359721
Attachment 48359722
Attachment 48359723
As far as I know, this is the first new Mustang in the world to run the super deep concave!
Tire widths aren't going to be maxed out since the more aggressive SDC fitment needs a slight stretch, but not a lot
We're currently working on a pair of 20x12 SDC for the rear so we'll see how that works!
Contact me at Jason@GetYourWheels.com with any questions or interest!
Attachment 48359721
Attachment 48359722
Attachment 48359723
As far as I know, this is the first new Mustang in the world to run the super deep concave!
Tire widths aren't going to be maxed out since the more aggressive SDC fitment needs a slight stretch, but not a lot
We're currently working on a pair of 20x12 SDC for the rear so we'll see how that works!
Contact me at Jason@GetYourWheels.com with any questions or interest!
#114
Supporting Vendor
Thread Starter
Here are some shots from our customer's C7 Z06 sporting a set of Gloss Gunmetal CF10s in 19x10/20x12
Attachment 48359667
Attachment 48337753
Attachment 48359668
This customer actually has TWO sets of CF10s, the other in Bronze Burst so we'll be able to share some pics of those when they're mounted!
Attachment 48359667
Attachment 48337753
Attachment 48359668
This customer actually has TWO sets of CF10s, the other in Bronze Burst so we'll be able to share some pics of those when they're mounted!
The following users liked this post:
GetYourWheels (02-14-2017)