2006 C6Z06 corvette with 608rwhp
#1
Instructor
Thread Starter
2006 C6Z06 corvette with 608rwhp, now with pics
2006 C6Z06 2LZ Machine silver with ebony interior and red stitching. Comes with nav, heated seats, bose and radar detector hookup through rear view. Livernois Motorsports stage 3 package put down 608rwhp with 529rwtq. All work done by livernois last summer. 19,500 miles with only 5k with the mods. Never raced. I just bought a lake house that we are remodeling and I am in need of a boat. $49k or I will consider trades of a mastercraft x series or similar boat. The car is stored in a heated garage during the winter and never sees the rain. Here is the list of mods.
Livernois Motorsports Stage 3 CNC Ported LS7 Cylinder Heads
Livernois Motorsports Stage 3 LS7 Camshaft
Livernois Motorsports Dual Valve Spring Package
(Livernois Motorsports Dual Valve Springs, Titanium Retainers, Valve Spring Locators, Locks, & Valve Seals)
Livernois Motorsports Ported Throttle Body
FAST 102 LSX-R Intake Manifold
FAST Fuel Rail Kit
Hardened Pushrods
Kooks 2" Longtube Headers
Kooks 3" off road catless X-Pipe
Muffler mod
Mild to wild switch in the garage opener
Wideband 02 Bung
Halltech Killer Bee 2 AAIS Cold Air Intake with beehive
Vette air
Elite Engineering oil catch can
ARP Head Bolts
GM MLS Head Gaskets
GM Exhaust Gaskets
GM Balancer Bolt
NGK TR6 Spark Plugs
160* thermostat
Professional Installation
Livernois Motorsports Dyno Tune
RPS Billet Twin Disk Clutch
MGW short throw shifter with race ***
RPI ZR1 front splitter with reinforcement
RPI ZR1 rear spoiler
DBA 2 piece front rotors and 1 piece rear rotors
Carbotech bobcat 1 piece pads
Tinted windows and rear hatch
Powdercoated oem black wheels
285 Nitto NT05 fronts - 98%
345 Nitto NT05R rears - 90%
Brand new optima 78 rt battery
Lloyds matts
Dust cover
Video of the dyno tune. This dyno is of the beginning of the summer with 1 7/8 american racing headers and put down 592/508. Dan Millen at livernois was not happy with the numbers so he put on 2" kooks in october and put down the 608/529 numbers.
http://www.youtube.com/watch?v=fiHp_uLV0h0
I will include close up car pics and both dyno sheet numbers upon request to email or post them as soon as I figure out how. You can call or email me. The car is in ******* MI, 55mi south of the mackinaw bridge.
989-619-5968
danmoylan@yahoo.com
Livernois Motorsports Stage 3 CNC Ported LS7 Cylinder Heads
Livernois Motorsports Stage 3 LS7 Camshaft
Livernois Motorsports Dual Valve Spring Package
(Livernois Motorsports Dual Valve Springs, Titanium Retainers, Valve Spring Locators, Locks, & Valve Seals)
Livernois Motorsports Ported Throttle Body
FAST 102 LSX-R Intake Manifold
FAST Fuel Rail Kit
Hardened Pushrods
Kooks 2" Longtube Headers
Kooks 3" off road catless X-Pipe
Muffler mod
Mild to wild switch in the garage opener
Wideband 02 Bung
Halltech Killer Bee 2 AAIS Cold Air Intake with beehive
Vette air
Elite Engineering oil catch can
ARP Head Bolts
GM MLS Head Gaskets
GM Exhaust Gaskets
GM Balancer Bolt
NGK TR6 Spark Plugs
160* thermostat
Professional Installation
Livernois Motorsports Dyno Tune
RPS Billet Twin Disk Clutch
MGW short throw shifter with race ***
RPI ZR1 front splitter with reinforcement
RPI ZR1 rear spoiler
DBA 2 piece front rotors and 1 piece rear rotors
Carbotech bobcat 1 piece pads
Tinted windows and rear hatch
Powdercoated oem black wheels
285 Nitto NT05 fronts - 98%
345 Nitto NT05R rears - 90%
Brand new optima 78 rt battery
Lloyds matts
Dust cover
Video of the dyno tune. This dyno is of the beginning of the summer with 1 7/8 american racing headers and put down 592/508. Dan Millen at livernois was not happy with the numbers so he put on 2" kooks in october and put down the 608/529 numbers.
http://www.youtube.com/watch?v=fiHp_uLV0h0
I will include close up car pics and both dyno sheet numbers upon request to email or post them as soon as I figure out how. You can call or email me. The car is in ******* MI, 55mi south of the mackinaw bridge.
989-619-5968
danmoylan@yahoo.com
Last edited by MBR44; 05-18-2011 at 10:44 AM.
#9
Burning Brakes
so you picked up about 16 hp, and 21 tq stepping up to the 2" headers. Damn, i might have to think about doing that. I've got a similar setup. Very nice car. if i didnt have mine, i'd be calling you. GLWS.
#12
Instructor
Thread Starter
New hid fog light kit installed.
Let me make this clear. I am not going to accept low ball offers and I am not willing to negotiate much from the listed price. The car has a clear title, so it is paid for!!! I am not bankrupt or hurting for money. I am selling this to make room in the garage for another toy and then building another z06 in a couple years. I have alot invested in the car, money was not a consideration when I did my mods and only the best went into the build. The car is definately worth the money I am asking. One drive and you won't feel the need to offer a lower price. I will keep the car if no reasonable price is agreed upon. Thanks for looking.
Let me make this clear. I am not going to accept low ball offers and I am not willing to negotiate much from the listed price. The car has a clear title, so it is paid for!!! I am not bankrupt or hurting for money. I am selling this to make room in the garage for another toy and then building another z06 in a couple years. I have alot invested in the car, money was not a consideration when I did my mods and only the best went into the build. The car is definately worth the money I am asking. One drive and you won't feel the need to offer a lower price. I will keep the car if no reasonable price is agreed upon. Thanks for looking.
Last edited by MBR44; 06-14-2011 at 03:53 PM.
#13
New hid fog light kit installed.
Let me make this clear. I am not going to accept low ball offers and I am not willing to negotiate much from the listed price. The car has a clear title, so it is paid for!!! I am not bankrupt or hurting for money. I am selling this to make room in the garage for another toy and then building another z06 in a couple years. I have alot invested in the car, money was not a consideration when I did my mods and only the best went into the build. The car is definately worth the money I am asking. One drive and you won't feel the need to offer a lower price. I will keep the car if no reasonable price is agreed upon. Thanks for looking.
Let me make this clear. I am not going to accept low ball offers and I am not willing to negotiate much from the listed price. The car has a clear title, so it is paid for!!! I am not bankrupt or hurting for money. I am selling this to make room in the garage for another toy and then building another z06 in a couple years. I have alot invested in the car, money was not a consideration when I did my mods and only the best went into the build. The car is definately worth the money I am asking. One drive and you won't feel the need to offer a lower price. I will keep the car if no reasonable price is agreed upon. Thanks for looking.
#19
Instructor
Thread Starter
Here is a link of the exact rails that I have on the car. It shows a good pic and if you look at the motor pics above they will confirm.
http://www.cpgnation.com/forum/fast-...fuel-3320.html
http://www.cpgnation.com/forum/fast-...fuel-3320.html
#20
Here is a link of the exact rails that I have on the car. It shows a good pic and if you look at the motor pics above they will confirm.
http://www.cpgnation.com/forum/fast-...fuel-3320.html
http://www.cpgnation.com/forum/fast-...fuel-3320.html