WTT: my pro-touring 1969 Camaro for your late model (prefer 2012 or 2013 but not necessary) Z06 or ZR1 and cash.
A car still under warranty is desired.
Willing to trade with dealers also.
To place an approximate value on my car, I refer you to recent Barrett Jackson auctions. Cars similar to mine have sold between $125,000 and $165,000.
It's a total frame off rebuild. I have hundreds of detailed pictures documenting the entire process of the build and the car was built by one of the best shops in the country.
Call or text Bryan at 760-458-3606
LS2 engine (stroker 402ci, 580hp crank)
Tremec T-56 Magnum 6-speed tranny
Detroit Speed (DSE) hydroformed front subframe with:
• Hydroformed Framerails
• Stamped Crossmembers
• Tubular Upper and Lower Control Arms
• Coilover Shocks
• Coilover Spring
• Power Rack and Pinion Steering
• Splined Anti-Roll Bar
• C6 Steering Knuckles and Bearing Packs
DSE rear QUADRALink
DSE adjustable rear anti-roll bar kit
DSE/Moser Ford 9" rear end
Ron Davis radiator
Wilwood 13" brakes; 6-piston front 4-piston rear
DSE weld in subframe connectors
DSE transmission crossmember (welded into body for additional rigidity)
DSE four-point roll cage (welded into body, not bolted)
DSE selectra speed-wiper kit
DSE electric RS headlight door kit
DSE roll cage
DSE dash insert
Flaming River tilt steering column
Momo steering wheel
Vintage Air AC/Front Runner
Katech satin black valve covers
Katech coil relocation kit
Fikse FM5 wheels; 9" front, 11" rear
Nitto NT-555 tires; 295/45 rear, 265/35 front
Valencia Orange color (BASF 3-stage paint)
Recaro Specialist cloth seats
Black Porche carpeted interior (forgot the brand but Porche fanatics go nuts over it
AutoMeter carbon fiber gauges (tach, speedo, oil pressure, water, fuel, volts)
G-Force four-point racing harness for seat belts
Clayton Machine Works pedals, window cranks and door handles
Rick's stainless steel tank
Dynamat sound deadner throughout
Loaded with billet parts such as Marquez Design billet taillights and running lights, Billet Specialties hood hinges, etc....
I've left out a lot of stuff and I'll try and update the parts list later...
Tucked, narrowed and painted front bumper
Ringbrothers billet black powdercoated hood hinges
Ringbrothers billet clutch fluid reservoir
Ringbrothers billet sill plates
Marquez design billet door strikers
Marquez design billet side marker bezels
Marquez design billet jamb vents
Marquez design front valence
Marquez design adjustable door stops
Billet Specialties billet rear battery mount