For Sale: One of the most highly modified ZO6's in the country
08-11-2013, 01:16 PM
#42
Drifting
Thread Starter
Here's a list of things gone into the motor.
Engine built by Erik at HKE
LSX Block
Callies LS7 Ultra Billet Crank
Carrillo Rods
Wiseco LS 4.155" bore 4.00" stroker forced induction piston 9.6:1 compression. Tool steel piston pins for FI. Total Seal Piston Rings for FI
Mast Rectangular Port LS7 12 Degree 6-Bolt Large Bore CNC Assembled with Lunati Dual Springs and Hardware
Trend hardened pushrods
Cometic LSX Head Gaskets
ACL coated main and rod bearings
ARP Main Studs
ARP2000 Cylinder head studs
New LS7 Hydraulic Roller Lifters
Dallas Performance custom grind DP-7X Blower Cam
The health of this engine is perfect. I performed a compression check on it yesterday to ensure all is good and have done the first oil change as the motor is now broken in.
As mentioned, this engine is built right. If you want to throw 1800+ RWHP at it with a monster twin turbo setup then this engine will handle it
Engine built by Erik at HKE
LSX Block
Callies LS7 Ultra Billet Crank
Carrillo Rods
Wiseco LS 4.155" bore 4.00" stroker forced induction piston 9.6:1 compression. Tool steel piston pins for FI. Total Seal Piston Rings for FI
Mast Rectangular Port LS7 12 Degree 6-Bolt Large Bore CNC Assembled with Lunati Dual Springs and Hardware
Trend hardened pushrods
Cometic LSX Head Gaskets
ACL coated main and rod bearings
ARP Main Studs
ARP2000 Cylinder head studs
New LS7 Hydraulic Roller Lifters
Dallas Performance custom grind DP-7X Blower Cam
The health of this engine is perfect. I performed a compression check on it yesterday to ensure all is good and have done the first oil change as the motor is now broken in.
As mentioned, this engine is built right. If you want to throw 1800+ RWHP at it with a monster twin turbo setup then this engine will handle it
08-13-2013, 07:00 PM
#46
Drifting
Thread Starter
A quick little "ride along" video I made for you guys 
http://www.youtube.com/watch?v=DFpiK...ature=youtu.be
http://www.youtube.com/watch?v=DFpiK...ature=youtu.be
08-21-2013, 08:50 AM
#51
Advanced
Member Since: Jun 2007
Location: butte montana
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
zo6
just curious...why hyd rollers? Fantastic car btw...I have three corvettes (too many) and a ranch in Montana. Are you at all interested in Montana land ...I have cows on 40 acres of it now. Thanks, John
