FS 2007 a&a C6 M6...low 10 street car
#1
Burning Brakes
Thread Starter
FS 2007 a&a C6 M6...low 10 street car
I've be debating this for several months and have decided to put my car up for sale. It's been fun but time to move on... I've got some pics in the link below and will add some more when the rain stop.
******************************
FS 2007 C6 1lt/base
Price $28500.00(willing to entertain offers via PM )
Miles 58,500
Location: Oxford,Pa
Bank has title –
clean car fax
Vehicle sold As Is
No tire kickers
Test Drives?: for a serious buyer with deposit
No Deposit: I will take you out for a nice long ride and left her stretch her legs
Reason:It sits more than it gets driven I dont have the time to use it for what I bought/built it for..
******************************
Modifications
A&A V3 si 3.6" Pulley (car comes with 3.8 pulley too)
Alky Control Dual Nozzle
Kooks 1 7/8" LTH No Cats
RSD Line Lock
AEM Digital Gauges AFR/Boost Vacuum/Fuel PSI
Ported LS2 Manifold(ported by C5Kid)
30 Spline T56(spline swap by Rick Kim@RKT56)
C6Z Rear Differential
C5 Axles
Wolfe Race Craft 5 Point Roll Bar
Race Quip 5 Point Harness
LS7 MAF
NEW!!! McLeod RXT clutch installed by Rick Kim @ RKT Performance
Front Driled and Slotted Rotors
Front Tires BFG KDW
Rear Tires Toyo R888
*********************************
I know I'll kick myself if it sells but I just dont have the time to enjoy it anymore. Car is Speed Density Tune by Andrew @ Complete Street Performance..
Made 618/528 on his dyno jet on a humid 90* night
On Keith's Pit Stops dyno jet it made 64X/58X on a 50* day
Best pass with a drag pack was 10.15@139. on a 50* TNT night
Video of pass
Link to some pictures
https://plus.google.com/photos/11315...63549704804337
******************************
FS 2007 C6 1lt/base
Price $28500.00(willing to entertain offers via PM )
Miles 58,500
Location: Oxford,Pa
Bank has title –
clean car fax
Vehicle sold As Is
No tire kickers
Test Drives?: for a serious buyer with deposit
No Deposit: I will take you out for a nice long ride and left her stretch her legs
Reason:It sits more than it gets driven I dont have the time to use it for what I bought/built it for..
******************************
Modifications
A&A V3 si 3.6" Pulley (car comes with 3.8 pulley too)
Alky Control Dual Nozzle
Kooks 1 7/8" LTH No Cats
RSD Line Lock
AEM Digital Gauges AFR/Boost Vacuum/Fuel PSI
Ported LS2 Manifold(ported by C5Kid)
30 Spline T56(spline swap by Rick Kim@RKT56)
C6Z Rear Differential
C5 Axles
Wolfe Race Craft 5 Point Roll Bar
Race Quip 5 Point Harness
LS7 MAF
NEW!!! McLeod RXT clutch installed by Rick Kim @ RKT Performance
Front Driled and Slotted Rotors
Front Tires BFG KDW
Rear Tires Toyo R888
*********************************
I know I'll kick myself if it sells but I just dont have the time to enjoy it anymore. Car is Speed Density Tune by Andrew @ Complete Street Performance..
Made 618/528 on his dyno jet on a humid 90* night
On Keith's Pit Stops dyno jet it made 64X/58X on a 50* day
Best pass with a drag pack was 10.15@139. on a 50* TNT night
Video of pass
Link to some pictures
https://plus.google.com/photos/11315...63549704804337
Last edited by Devilish34; 11-24-2014 at 01:05 PM.
#6
Burning Brakes
Thread Starter
Car is located in 19363 Oxford,Pa.
I can get some more pics up once it stops raining(most likely by Sunday I will have time)
The car drives and functions as it should but the clutch will eventually need to be done.
I can get some more pics up once it stops raining(most likely by Sunday I will have time)
The car drives and functions as it should but the clutch will eventually need to be done.
#12
Instructor
Pretty sure we met at the track... I have Andrew's old Vette. Sad to see it go, hopefully you end up with another project. If you'd like... you can have the project of swapping the cage and 5 point to my car
#13
Burning Brakes
Thread Starter
I thought I was going to have more time to get some more pictures but had to work on Saturday. . If I get home before it's too dark Monday I will upload some more.
lol..Yes we did meet at Cecil at least one time.. Did you ever get drag radials on your car? I thought when I last saw you it was still on a street tire
lol..Yes we did meet at Cecil at least one time.. Did you ever get drag radials on your car? I thought when I last saw you it was still on a street tire
#14
Instructor
Got DR's on for the next week, went down there then the track got shut down before I got a real run in. Then when Atco opened Feb 7th I lost oil pressure on the way there. Oh then after we finally get everything back together, built trans and rear, I snap an axle the first day I get the car back and now we're swapping the bell housing that broke in the making.