2007 Z06 vy for sale
#1
2007 z06 vy for sale 33k
2007 Z06 Corvette with 74000 miles.The first Items replaced were the BCM and Fuse block. Shortly after new Goodyear F1 run flats and Grand Sport Chrome rims and new wheel sensors. The brakes were redone with aftermarket rotors, Hawk Ceramic pads, new color matched GM Calipers were installed and Johnny O shocks finished the suspension .
The transmission was rebuilt by RPM to level 5 (700HP) specs and the torque tube was reconditioned. A new Scoogin/ Dickey clutch, aluminum flywheel, slave cylinder and clutch master cylinder was also installed. To fix the head issue known with the LS7 and pair of Texas Speed PRC265 race heads were installed with SS valves, 650 lift springs and a Comp Cam Trunion upgrade. Inspection of the cylinder walls while the heads were off showed factory bore/hone marks in every tube. An Elite Engineering catch can finished the top end. All fluids have been changed (The oil 3 times). To help the heads breathe Melrose Ceramic coated headers were installed with high flow cats 8.5 mm wires, new plugs and a computer tune. I've installed sound deadening material from the rear of the seats to the end of the cargo area to quiet the car down on long drives. A carbon fiber radio face fits very nicely .
The shifter was replaced with an MGW Short throw and a new Megatron battery keeps juice flowing. New Z06 mats cover the floorboard. No burnouts or any abuse, the car is stored inside. Please no trades, and low ball offers will be ignored. CLEAN TITLE in hand .Car is sold AS-IS from me.
$ 33,000 DLLS . Location: Arizona
- SOLD -
The transmission was rebuilt by RPM to level 5 (700HP) specs and the torque tube was reconditioned. A new Scoogin/ Dickey clutch, aluminum flywheel, slave cylinder and clutch master cylinder was also installed. To fix the head issue known with the LS7 and pair of Texas Speed PRC265 race heads were installed with SS valves, 650 lift springs and a Comp Cam Trunion upgrade. Inspection of the cylinder walls while the heads were off showed factory bore/hone marks in every tube. An Elite Engineering catch can finished the top end. All fluids have been changed (The oil 3 times). To help the heads breathe Melrose Ceramic coated headers were installed with high flow cats 8.5 mm wires, new plugs and a computer tune. I've installed sound deadening material from the rear of the seats to the end of the cargo area to quiet the car down on long drives. A carbon fiber radio face fits very nicely .
The shifter was replaced with an MGW Short throw and a new Megatron battery keeps juice flowing. New Z06 mats cover the floorboard. No burnouts or any abuse, the car is stored inside. Please no trades, and low ball offers will be ignored. CLEAN TITLE in hand .Car is sold AS-IS from me.
$ 33,000 DLLS . Location: Arizona
- SOLD -
Last edited by Alex_Mx; 12-26-2014 at 07:12 AM. Reason: Sold
#6
In light of saving yourself some time, you've got to come quite a bit lower than 39k , even if you're asking obo - when posting on the forums with a VY Z, and that kind of milage.
You're better off trying on craigslist or autotrader...
Either way, best of luck! Car looks very clean!
You're better off trying on craigslist or autotrader...
Either way, best of luck! Car looks very clean!
#8
In light of saving yourself some time, you've got to come quite a bit lower than 39k , even if you're asking obo - when posting on the forums with a VY Z, and that kind of milage.
You're better off trying on craigslist or autotrader...
Either way, best of luck! Car looks very clean!
You're better off trying on craigslist or autotrader...
Either way, best of luck! Car looks very clean!
#10
Drifting
#17
It's a popular color, and you do see them quite often, however - even when I was shopping around ( I wasn't too picky when it came to color ) the VY Zs were the lowest priced around...
#19
I'd have to agree, I love yellow. But those are the only z06s I can find for sell at a decent price